Interface card installed

Discussion in 'Cisco' started by JSS, Sep 16, 2004.

  1. JSS

    JSS Guest

    Is there a command that will tell me the type of interface card that
    is installed in a 2650 router. We have a bunch of routers and some of
    them have just a serial port connected to an external CSU, others have
    a service module and still others have some type of controller card
    installed.

    I know that 'sho ver' will tell me if I have a contr t1 card and if
    there is one or two ports but not if it is a WIC or a VWIC card. I
    looked at 'sho diag' but I didn't see where it said the type of card
    installed.

    I am planning to write a script to check the routers and export it to
    a Excel doc for further use.

    Thanks

    Jeff
     
    JSS, Sep 16, 2004
    #1
    1. Advertising

  2. JSS

    micke Guest

    will

    show controller int xxx

    help you

    /micke

    JSS <> wrote in message news:<>...
    > Is there a command that will tell me the type of interface card that
    > is installed in a 2650 router. We have a bunch of routers and some of
    > them have just a serial port connected to an external CSU, others have
    > a service module and still others have some type of controller card
    > installed.
    >
    > I know that 'sho ver' will tell me if I have a contr t1 card and if
    > there is one or two ports but not if it is a WIC or a VWIC card. I
    > looked at 'sho diag' but I didn't see where it said the type of card
    > installed.
    >
    > I am planning to write a script to check the routers and export it to
    > a Excel doc for further use.
    >
    > Thanks
    >
    > Jeff
     
    micke, Sep 16, 2004
    #2
    1. Advertising

  3. JSS

    Hansang Bae Guest

    In article <>,
    says...
    > Is there a command that will tell me the type of interface card that
    > is installed in a 2650 router. We have a bunch of routers and some of
    > them have just a serial port connected to an external CSU, others have
    > a service module and still others have some type of controller card
    > installed.
    >
    > I know that 'sho ver' will tell me if I have a contr t1 card and if
    > there is one or two ports but not if it is a WIC or a VWIC card. I
    > looked at 'sho diag' but I didn't see where it said the type of card
    > installed.
    >
    > I am planning to write a script to check the routers and export it to
    > a Excel doc for further use.


    sho hard
    and/or
    sho diag

    --

    hsb

    "Somehow I imagined this experience would be more rewarding" Calvin
    *************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
    ********************************************************************
    Due to the volume of email that I receive, I may not not be able to
    reply to emails sent to my account. Please post a followup instead.
    ********************************************************************
     
    Hansang Bae, Sep 17, 2004
    #3
  4. JSS

    Ben Guest

    show diagbus is the one you want


    "JSS" <> wrote in message
    news:...
    > Is there a command that will tell me the type of interface card that
    > is installed in a 2650 router. We have a bunch of routers and some of
    > them have just a serial port connected to an external CSU, others have
    > a service module and still others have some type of controller card
    > installed.
    >
    > I know that 'sho ver' will tell me if I have a contr t1 card and if
    > there is one or two ports but not if it is a WIC or a VWIC card. I
    > looked at 'sho diag' but I didn't see where it said the type of card
    > installed.
    >
    > I am planning to write a script to check the routers and export it to
    > a Excel doc for further use.
    >
    > Thanks
    >
    > Jeff
     
    Ben, Sep 21, 2004
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. David

    PCI interface or USB interface

    David, Sep 14, 2004, in forum: Wireless Networking
    Replies:
    4
    Views:
    712
    David
    Sep 16, 2004
  2. Andrea
    Replies:
    0
    Views:
    895
    Andrea
    Apr 19, 2004
  3. jonnah
    Replies:
    1
    Views:
    1,310
    mcaissie
    Apr 21, 2004
  4. no-one
    Replies:
    0
    Views:
    1,636
    no-one
    Jul 28, 2004
  5. Replies:
    2
    Views:
    559
Loading...

Share This Page