Installing NM-1E on 2620

Discussion in 'Cisco' started by cadmium3@gmail.com, Dec 27, 2004.

  1. Guest

    I installed the new card (NM-1E) into the 2620, powered it back on then
    ran the show diag.

    result was:

    Slot 1:
    Unknown (type 55) Port adapter
    Port adapter is disabled
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware revision 1.2 Board revision E0
    Serial number 26309296 Part number 800-01789-05
    Test history 0x0 RMA number 00-00-00
    EEPROM format version 1
    EEPROM contents (hex):
    0x20: 01 37 01 02 01 91 72 B0 50 06 FD 05 00 00 00 00
    0x30: 70 00 00 00 01 06 11 17 FF FF FF FF FF FF FF FF
    any suggestions??

    IOS ver 12.0(7)T
    , Dec 27, 2004
    #1
    1. Advertising

  2. Guest

    An unknown port adpater message typically indicates that the verion of
    IOS on the box does not recognize the port adpater in question.
    Typically means you need to upgrade to a newer IOS...
    , Dec 27, 2004
    #2
    1. Advertising

  3. Guest

    Thanks for the input...

    Any suggestion on the version to upgrade to?
    , Dec 27, 2004
    #3
  4. Guest

    On 27 Dec 2004 11:50:06 -0800, wrote:

    >I installed the new card (NM-1E) into the 2620, powered it back on then


    Minimum compatible releases (for Chassis CISCO2620, 10/100 ETHERNET
    ROUTER W/2 WIC SLOTS, 1 NETWORK(CIS2620-TS), IP-BASE) :
    12.3(4)XD4
    12.3(2)T9
    12.3(1a)

    [use Software Advisor at cisco.com]
    , Dec 28, 2004
    #4
  5. thrill Guest

    12.1, 12,2, and 12.3 will work. NEVER use version of code on a router
    that has a "T" or "X" in the name unless you need a specific feature.
    T code is new software features, and X is new hardware features. 12.1T
    code becomes 12.2 code, 12.2T code becomes 12.3 code, and 12.3T will
    become 12.4, same with X code. The only T or X code you should run is
    the latest train of T code, in this case 12.3T, because any feature you
    need in 12.2T code is available in 12.3. Code without letters contains
    only bug fixes, of the previous T and X trains.

    Scott
    thrill, Jan 2, 2005
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Kenneth Mikkelsen
    Replies:
    1
    Views:
    2,540
    Kenneth Mikkelsen
    Jul 7, 2003
  2. Colin Anderson

    FS/FA: Cisco 2620 w/ WIC-1DSU-T1

    Colin Anderson, Aug 24, 2003, in forum: Cisco
    Replies:
    0
    Views:
    530
    Colin Anderson
    Aug 24, 2003
  3. Ammad Khan

    cisco 2620

    Ammad Khan, Oct 25, 2003, in forum: Cisco
    Replies:
    1
    Views:
    593
    Jesper Skriver
    Oct 25, 2003
  4. Bob Rivers

    SNMP on a 2620 router

    Bob Rivers, Nov 3, 2003, in forum: Cisco
    Replies:
    1
    Views:
    1,354
    Erik Tamminga
    Nov 3, 2003
  5. Brian Bergin

    NAT on 2620

    Brian Bergin, Nov 11, 2003, in forum: Cisco
    Replies:
    1
    Views:
    486
    Rod Dorman
    Nov 11, 2003
Loading...

Share This Page