HSSI Port, larcoms Orion 4000, Tons of abort/crc errors

Discussion in 'Cisco' started by hallcommunications@gmail.com, Apr 15, 2005.

  1. Guest

    Hello and thanks for the help.
    I have 7513(hssi)larscom orion 4000 -- 6T1's -- Larcoms orion
    4000(hssi) 3600.
    I am not using the mega T1.
    I've included some show interfaces of each router. I'd appreshate any
    help.

    *********** Show Interfaces *************************
    7513;
    Hssi8/0 is up, line protocol is up
    Hardware is cxBus HSSI
    Description: Region14
    Internet address is 10.1.175.249/30
    MTU 4470 bytes, BW 45045 Kbit, DLY 200 usec,
    reliability 255/255, txload 5/255, rxload 2/255
    Encapsulation HDLC, crc 16, loopback not set
    Keepalive not set
    Restart-Delay is 0 secs
    Last input 00:00:00, output 00:00:00, output hang never
    Last clearing of "show interface" counters never
    Input queue: 0/75/0/1853 (size/max/drops/flushes); Total output
    drops: 6218
    Queueing strategy: fifo
    Output queue: 0/40 (size/max)
    5 minute input rate 504000 bits/sec, 149 packets/sec
    5 minute output rate 911000 bits/sec, 161 packets/sec
    31599238 packets input, 4276932616 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 335 giants, 0 throttles
    0 parity
    70690 input errors, 24533 CRC, 45822 frame, 0 overrun,, 0 abort
    30238940 packets output, 2870499628 bytes, 0 underruns
    0 output errors, 0 applique, 1 interface resets
    0 output buffer failures, 0 output buffers swapped out
    139 carrier transitions
    3600;
    Hssi2/0 is up, line protocol is up
    Hardware is M1T-HSSI-B
    Internet address is 10.1.175.250/30
    MTU 4470 bytes, BW 45045 Kbit, DLY 200 usec,
    reliability 255/255, txload 2/255, rxload 4/255
    Encapsulation HDLC, crc 16, loopback not set
    Keepalive not set
    Last input 00:00:00, output 00:00:00, output hang never
    Last clearing of "show interface" counters 2w2d
    Queueing strategy: fifo
    Output queue 0/40, 210079 drops; input queue 0/75, 0 drops
    5 minute input rate 831000 bits/sec, 147 packets/sec
    5 minute output rate 491000 bits/sec, 137 packets/sec
    161451237 packets input, 3901030929 bytes, 0 no buffer
    Received 24768 broadcasts, 4 runts, 5606 giants, 0 throttles
    0 parity
    689549831 input errors, 311694935 CRC, 0 frame, 219859 overrun,
    160 ignored
    , 377634877 abort
    169438184 packets output, 4091592774 bytes, 0 underruns
    0 output errors, 0 applique, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    4274 carrier transitions LC=down CA=up TM=down LB=down TA=up
    LA=down
    ***********************
    thanks again.
     
    , Apr 15, 2005
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Steve
    Replies:
    8
    Views:
    52,895
    ulziit_delger
    Jul 30, 2010
  2. Seymour_Butz_Please

    Abort errors?

    Seymour_Butz_Please, Nov 18, 2003, in forum: Cisco
    Replies:
    0
    Views:
    743
    Seymour_Butz_Please
    Nov 18, 2003
  3. Trent Collicutt

    crc errors on a 2950G - 3750 link

    Trent Collicutt, Apr 26, 2004, in forum: Cisco
    Replies:
    12
    Views:
    2,519
    Trent Collicutt
    May 7, 2004
  4. Allen
    Replies:
    4
    Views:
    2,540
    Allen
    Jun 21, 2004
  5. HSSI errors on 3600

    , Feb 2, 2005, in forum: Cisco
    Replies:
    3
    Views:
    2,495
    Hansang Bae
    Feb 4, 2005
Loading...

Share This Page