How to log the sh ip dhcp snooping binding table?

Discussion in 'Cisco' started by Greg H., Oct 25, 2006.

  1. Greg H.

    Greg H. Guest

    How would I be able to log the results of the "show ip dhcp snooping
    binding"? Either transfer it by TFTP or store locally in the log file
    somehow? We are also running ciscoworks, but how do i setup a custom
    report that will give me the results of a command? I know how to set it
    up to run the commands but afterwords it just disconnects and I dont
    get the results from the command.
    Greg H., Oct 25, 2006
    #1
    1. Advertising

  2. Greg H.

    Thrill5 Guest

    "Greg H." <> wrote in message
    news:...
    > How would I be able to log the results of the "show ip dhcp snooping
    > binding"? Either transfer it by TFTP or store locally in the log file
    > somehow? We are also running ciscoworks, but how do i setup a custom
    > report that will give me the results of a command? I know how to set it
    > up to run the commands but afterwords it just disconnects and I dont
    > get the results from the command.
    >


    Have you seen the command "ip dhcp snooping database" command?

    Scott
    Thrill5, Oct 26, 2006
    #2
    1. Advertising

  3. Greg H.

    Greg H. Guest

    Yes I've tried to use this command and haven't gotten anywhere with it.
    Here's my config where I tried to enable:


    ip dhcp relay information trust-all
    !
    ip dhcp snooping vlan 1-4006
    ip dhcp snooping database tftp://my.ip.add.ress/TFTP-Root/test.txt
    ip dhcp snooping database write-delay 30
    ip dhcp snooping database timeout 5
    ip dhcp snooping


    Am I not using the correct syntax on the tftp command or is this just
    to pull the bindings from a tftp server and not to save it to one?
    please help!

    Thrill5 wrote:
    > "Greg H." <> wrote in message
    > news:...
    > > How would I be able to log the results of the "show ip dhcp snooping
    > > binding"? Either transfer it by TFTP or store locally in the log file
    > > somehow? We are also running ciscoworks, but how do i setup a custom
    > > report that will give me the results of a command? I know how to set it
    > > up to run the commands but afterwords it just disconnects and I dont
    > > get the results from the command.
    > >

    >
    > Have you seen the command "ip dhcp snooping database" command?
    >
    > Scott
    Greg H., Oct 26, 2006
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Torquil Corkerton
    Replies:
    6
    Views:
    14,352
    Torquil Corkerton
    Apr 6, 2004
  2. Victor Sudakov

    Re: DHCP snooping across several switches

    Victor Sudakov, Sep 24, 2005, in forum: Cisco
    Replies:
    3
    Views:
    1,643
    Victor Sudakov
    Sep 25, 2005
  3. abrink
    Replies:
    4
    Views:
    6,836
    Peter
    Dec 2, 2005
  4. colin c.
    Replies:
    9
    Views:
    2,735
    Martin Gallagher
    Aug 19, 2006
  5. Bob Simon

    show ip dhcp binding

    Bob Simon, Dec 20, 2006, in forum: Cisco
    Replies:
    1
    Views:
    5,600
    Aaron Leonard
    Dec 20, 2006
Loading...

Share This Page