How to enable two uplinks

Discussion in 'Cisco' started by tkmuthuvel, Aug 1, 2006.

  1. tkmuthuvel

    tkmuthuvel

    Joined:
    Aug 1, 2006
    Messages:
    4
    Dear all,

    my settings is

    I have on cisco 3750 switch. On other end there is DAX switch it has 4nos GB ports and 4 fiber port . this is switch rather than Media converter.

    Here if i connect fiber cable to fiber port NO 1 i'll get out put on Ethernet port name as 1 [first] the reset in same manner on DAX

    OK now i have connected 1'st port on fibermedia and get output on eth 1st port on dax switch now this 1st port output is conntected to CISCO 3750 switch .

    Now everthing is working fine.

    Wheni move to connect from port no:2 on DAX to cisco 3750 switch cisco switch port is not come to active state.

    Because here two switchs one is CISCO 3750 another is DAX are trying to connect two uplinks.

    so spantree is prevent this setup.

    how can i make setup with two uplinks in two devices on active condition..?
    tkmuthuvel, Aug 1, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Bill F
    Replies:
    11
    Views:
    1,405
    Gert Doering
    Feb 14, 2004
  2. david@wmol.com

    BGP - limiting subnets and uplinks

    david@wmol.com, Nov 16, 2004, in forum: Cisco
    Replies:
    3
    Views:
    472
  3. tony

    uplinks

    tony, Sep 13, 2006, in forum: Cisco
    Replies:
    0
    Views:
    565
  4. tony

    uplinks

    tony, Oct 2, 2006, in forum: Cisco
    Replies:
    0
    Views:
    438
  5. tony

    uplinks

    tony, Oct 2, 2006, in forum: Cisco
    Replies:
    0
    Views:
    482
Loading...

Share This Page