How configure a couple of cisco 2621xm with ospf and hsrp activated

Discussion in 'Cisco' started by Max, Jan 18, 2005.

  1. Max

    Max Guest

    I have to configure a couple of cisco 2621xm. One must be connected to
    a primary link and the second one to 4 isdn lines for backup of the
    primary one.
    Ospf will be used as routing protocol and I have to configure hsrp too
    (and also a backdoor access for the router connected to the isdn
    lines).
    Follow some specifics that the customer required me. I'm not practise
    with ospf and hsrp.May somebody provide me some ideas.Many thanks

    details about the Ospf config
    ****************************************************************

    Primary Router

    OSPF Process ID         50
    Loopback address       172.18.0.7 255.255.255.255
    Ip Wan Address           192.168.162.22 255.255.255.252
    WAN Interface         Area 0 backbone
    Lan interface            Area 0


    Subnet Announced:
                                       172.18.0.7/32                      
       Loopback address and router ID of the Ospf process
    192.168.162.20/30                    Subnet interface ITZ
                                       193.28.103.2/24                    
                  Customer' subnet
                                       193.28.100.0/24                    
                  Customer's subnet
                                       10.120.2.0/24                      
       Customer' subnet
    xx.xx.xx.xx/xx                         Lan Interface Subnet

    HSRP  = ACTIVE
    ROUTER BACKUP
    Process ID                   50
    Loopback address       172.18.0.8 255.255.255.255
    IP PRI ISDN                  To be defined later
    Lan Interface           Area 0 Backbone

    Subnet Announced      
                                       Loopback
                                       all the Lan
                                       Pri interface in passive-interface
    mode

    HSRP = STANDBY
     
    Max, Jan 18, 2005
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. lcox

    HSRP & OSPF

    lcox, Feb 4, 2004, in forum: Cisco
    Replies:
    3
    Views:
    7,893
    rsl.it63
    Sep 15, 2011
  2. Max
    Replies:
    5
    Views:
    3,315
    Hansang Bae
    Jan 23, 2005
  3. Max
    Replies:
    3
    Views:
    470
  4. Replies:
    3
    Views:
    1,369
    Mike' Newsgroups
    Aug 24, 2005
  5. OSPF with HSRP or GLBP

    , Jun 7, 2007, in forum: Cisco
    Replies:
    0
    Views:
    999
Loading...

Share This Page