high cpu on a 5800

Discussion in 'Cisco' started by hans, May 29, 2004.

  1. hans

    hans Guest

    hi,

    the cpu load of our as5800 is over 97% some time.

    CPU utilization for five seconds: 99%/14%; one minute: 99%; five minutes:
    99%
    PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
    7 990628 7374 134340 18.44% 21.81% 23.48% 0 Serial
    Backgroun
    29 227196 26345 8623 9.96% 9.56% 7.66% 0 Net
    Background
    57 1081464 15885 68080 14.90% 18.95% 22.83% 0 VTEMPLATE
    Backgr
    61 76304 16236 4699 0.89% 0.76% 0.85% 0 ISDN
    72 6512 1512 4306 0.07% 0.11% 0.09% 0 CDP Protocol
    70 1117504 4650956 240 2.05% 2.78% 1.99% 0 IP Input
    88 208300 10733 19407 11.04% 9.94% 7.74% 0 PPP IPCP
    151 649072 10842 59866 14.66% 19.52% 18.45% 0 Multilink
    event


    we use the c5800-p4-mz.122-2.XB15.bin ios

    System image file is "slot0:c5800-p4-mz.122-2.XB15.bin"

    cisco 7206VXR (NPE300) processor (revision D) with 253952K/40960K bytes of
    memor
    y.
    Processor board ID 20390425
    R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
    6 slot VXR midplane, Version 2.0

    Last reset from power-on
    Channelized E1, Version 1.0.
    X.25 software, Version 3.0.0.
    Bridging software.
    SuperLAT software (copyright 1990 by Meridian Technology Corp).
    Primary Rate ISDN software, Version 1.1.
    1 FastEthernet/IEEE 802.3 interface(s)
    1736 Serial network interface(s)
    864 terminal line(s)
    60 Channelized E1/PRI port(s)
    1 FE interface(s) for dial shelf to router shelf interconnect

    125K bytes of non-volatile configuration memory.


    in the time where the cpu is so high we have a lot of customer
    whis the same username every sec.


    regards hans
     
    hans, May 29, 2004
    #1
    1. Advertising

  2. hans

    mh Guest

    1. post your config without passwords

    2. post the output of "sh ip traffic"

    3. post the output of "sh int"

    4. post the output of "sh ip cef summary"
     
    mh, Jun 2, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Matt
    Replies:
    2
    Views:
    574
    Jeroen
    Feb 20, 2004
  2. Matt
    Replies:
    1
    Views:
    561
    Aaron Leonard
    Oct 19, 2004
  3. MA

    zoom 5800 ata problems

    MA, Jun 2, 2006, in forum: UK VOIP
    Replies:
    1
    Views:
    1,426
    killakrust
    Mar 1, 2007
  4. ape shall not kill ape

    how can i get a Daewoo 5800 DVD player remote control?

    ape shall not kill ape, Jul 12, 2008, in forum: DVD Video
    Replies:
    1
    Views:
    683
    Telstar
    Jul 19, 2008
  5. R.Giskard Reventlov

    Zoom 5800 Uk Settings

    R.Giskard Reventlov, Mar 18, 2010, in forum: UK VOIP
    Replies:
    0
    Views:
    755
    R.Giskard Reventlov
    Mar 18, 2010
Loading...

Share This Page