help!!! ping losss 80%

Discussion in 'Cisco' started by camocas, Jun 1, 2006.

  1. camocas

    camocas Guest

    Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    I have all configured, ios firewall, ips etc... The current ports Im
    using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    got nat to one ip which is also used for the webvpn and vpn
    connections, my company got around 50 users.

    The problem its when I ping any outside station I got a ping succcess
    of 80% ... is like 3 in 3 seconds im loosing 1 datagram. Internally I
    ping sucesseful without any problems at all... what could it be this
    problem? I can ping my gateway IP and its 100% but after that its
    always 80% ... Really need help! any advice? thanks

    e.g.
    DEgateway#ping
    Protocol [ip]:
    Target IP address: 158.43.128.72
    Repeat count [5]: 100
    Datagram size [100]:
    Timeout in seconds [2]:
    Extended commands [n]:
    Sweep range of sizes [n]:
    Type escape sequence to abort.
    Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    seconds:
    ..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    ms
    DEgateway#ping
    Protocol [ip]: 158.43.128.72
    % Unknown protocol - "158.43.128.72", type "ping ?" for help
    DEgateway#ping
    Protocol [ip]:
    Target IP address: 158.43.128.72
    Repeat count [5]: 500
    Datagram size [100]:
    Timeout in seconds [2]:
    Extended commands [n]:
    Sweep range of sizes [n]:
    Type escape sequence to abort.
    Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    seconds:
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!.!!!!
    Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    ms
    DEgateway#
     
    camocas, Jun 1, 2006
    #1
    1. Advertising

  2. camocas

    thrill5 Guest

    Sounds like a circuit issue. From the router, ping the next hop on the wan
    circuit and see if you still get ping loss. If you do, you've found the
    problem.

    Scott
    "camocas" <> wrote in message
    news:...
    > Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    > I have all configured, ios firewall, ips etc... The current ports Im
    > using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    > got nat to one ip which is also used for the webvpn and vpn
    > connections, my company got around 50 users.
    >
    > The problem its when I ping any outside station I got a ping succcess
    > of 80% ... is like 3 in 3 seconds im loosing 1 datagram. Internally I
    > ping sucesseful without any problems at all... what could it be this
    > problem? I can ping my gateway IP and its 100% but after that its
    > always 80% ... Really need help! any advice? thanks
    >
    > e.g.
    > DEgateway#ping
    > Protocol [ip]:
    > Target IP address: 158.43.128.72
    > Repeat count [5]: 100
    > Datagram size [100]:
    > Timeout in seconds [2]:
    > Extended commands [n]:
    > Sweep range of sizes [n]:
    > Type escape sequence to abort.
    > Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > seconds:
    > .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    > ms
    > DEgateway#ping
    > Protocol [ip]: 158.43.128.72
    > % Unknown protocol - "158.43.128.72", type "ping ?" for help
    > DEgateway#ping
    > Protocol [ip]:
    > Target IP address: 158.43.128.72
    > Repeat count [5]: 500
    > Datagram size [100]:
    > Timeout in seconds [2]:
    > Extended commands [n]:
    > Sweep range of sizes [n]:
    > Type escape sequence to abort.
    > Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > seconds:
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!.!!!!
    > Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    > ms
    > DEgateway#
    >
     
    thrill5, Jun 2, 2006
    #2
    1. Advertising

  3. camocas

    camocas Guest

    Everything after the gateway I have ping loss... So it means its the
    leased line which is having problems? Could it in any change be me???

    Thanks
    thrill5 wrote:

    > Sounds like a circuit issue. From the router, ping the next hop on the wan
    > circuit and see if you still get ping loss. If you do, you've found the
    > problem.
    >
    > Scott
    > "camocas" <> wrote in message
    > news:...
    > > Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    > > I have all configured, ios firewall, ips etc... The current ports Im
    > > using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    > > got nat to one ip which is also used for the webvpn and vpn
    > > connections, my company got around 50 users.
    > >
    > > The problem its when I ping any outside station I got a ping succcess
    > > of 80% ... is like 3 in 3 seconds im loosing 1 datagram. Internally I
    > > ping sucesseful without any problems at all... what could it be this
    > > problem? I can ping my gateway IP and its 100% but after that its
    > > always 80% ... Really need help! any advice? thanks
    > >
    > > e.g.
    > > DEgateway#ping
    > > Protocol [ip]:
    > > Target IP address: 158.43.128.72
    > > Repeat count [5]: 100
    > > Datagram size [100]:
    > > Timeout in seconds [2]:
    > > Extended commands [n]:
    > > Sweep range of sizes [n]:
    > > Type escape sequence to abort.
    > > Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > seconds:
    > > .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    > > ms
    > > DEgateway#ping
    > > Protocol [ip]: 158.43.128.72
    > > % Unknown protocol - "158.43.128.72", type "ping ?" for help
    > > DEgateway#ping
    > > Protocol [ip]:
    > > Target IP address: 158.43.128.72
    > > Repeat count [5]: 500
    > > Datagram size [100]:
    > > Timeout in seconds [2]:
    > > Extended commands [n]:
    > > Sweep range of sizes [n]:
    > > Type escape sequence to abort.
    > > Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > seconds:
    > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > !!!!!.!!!!
    > > Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    > > ms
    > > DEgateway#
    > >
     
    camocas, Jun 2, 2006
    #3
  4. camocas

    camocas Guest

    I forgot to include, this is the output of the interface which connects
    to the outside world, my connection is:

    LAN¦-------------------------¦CISCO2811¦-publicip-----------¦ROUTER..ISP¦------LEASEDLINE

    The line btw cisco2811 and isp router its working at half duplex, I
    have fitted the router 3weeks ago. Everything there is in my premises.


    DEgateway#sh controllers fa0/1
    Interface FastEthernet0/1
    Hardware is MV96340
    HWIDB: 46E8F410, INSTANCE: 46E904F0, FASTSEND: 4343B97C, MCI_INDEX: 0

    Aggregate MIB Counters
    ----------------------
    Rx Good Bytes: 151816324 Rx Good Frames: 353042
    Rx Bad Bytes: 129824 Rx Bad Frames: 1455
    Rx Broadcast Frames: 2816 Rx Multicast Frames: 1100
    Tx Good Bytes: 333571839 Tx Good Frames: 405116
    Tx Broadcast Frames: 10 Tx Multicast Frames: 0
    Rx+Tx Min-64B Frames: 175318 Rx+Tx 65-127B Frames: 164684
    Rx+Tx 128-255B Frames: 73991 Rx+Tx 256-511B Frames: 30312
    Rx+Tx 512-1023B Frames: 35986 Rx+Tx 1024-MaxB Frames: 279322
    Rx Unrecog MAC Ctrl Frames: 0
    Rx Good FC Frames: 0 Rx Bad FC Frames: 0
    Rx Undersize Frames: 0 Rx Fragment Frames: 0
    Rx Oversize Frames: 0 Rx Jabber Frames: 0
    Rx MAC Errors: 0 Rx Bad CRCs: 0
    Tx Collisions: 1455 Tx Late Collisions: 0

    PHY Registers
    -------------
    Register 0x00: 1000 782D 0040 61E4 01E1 0021 0004 2001
    --More--
    camocas wrote:
    > Everything after the gateway I have ping loss... So it means its the
    > leased line which is having problems? Could it in any change be me???
    >
    > Thanks
    > thrill5 wrote:
    >
    > > Sounds like a circuit issue. From the router, ping the next hop on the wan
    > > circuit and see if you still get ping loss. If you do, you've found the
    > > problem.
    > >
    > > Scott
    > > "camocas" <> wrote in message
    > > news:...
    > > > Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    > > > I have all configured, ios firewall, ips etc... The current ports Im
    > > > using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    > > > got nat to one ip which is also used for the webvpn and vpn
    > > > connections, my company got around 50 users.
    > > >
    > > > The problem its when I ping any outside station I got a ping succcess
    > > > of 80% ... is like 3 in 3 seconds im loosing 1 datagram. Internally I
    > > > ping sucesseful without any problems at all... what could it be this
    > > > problem? I can ping my gateway IP and its 100% but after that its
    > > > always 80% ... Really need help! any advice? thanks
    > > >
    > > > e.g.
    > > > DEgateway#ping
    > > > Protocol [ip]:
    > > > Target IP address: 158.43.128.72
    > > > Repeat count [5]: 100
    > > > Datagram size [100]:
    > > > Timeout in seconds [2]:
    > > > Extended commands [n]:
    > > > Sweep range of sizes [n]:
    > > > Type escape sequence to abort.
    > > > Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > seconds:
    > > > .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    > > > ms
    > > > DEgateway#ping
    > > > Protocol [ip]: 158.43.128.72
    > > > % Unknown protocol - "158.43.128.72", type "ping ?" for help
    > > > DEgateway#ping
    > > > Protocol [ip]:
    > > > Target IP address: 158.43.128.72
    > > > Repeat count [5]: 500
    > > > Datagram size [100]:
    > > > Timeout in seconds [2]:
    > > > Extended commands [n]:
    > > > Sweep range of sizes [n]:
    > > > Type escape sequence to abort.
    > > > Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > seconds:
    > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > !!!!!.!!!!
    > > > Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    > > > ms
    > > > DEgateway#
    > > >
     
    camocas, Jun 2, 2006
    #4
  5. camocas

    Guest

    Can you post a Show Interface and the Logs?


    camocas wrote:
    > I forgot to include, this is the output of the interface which connects
    > to the outside world, my connection is:
    >
    > LAN¦-------------------------¦CISCO2811¦-publicip-----------¦ROUTER.ISP¦------LEASEDLINE
    >
    > The line btw cisco2811 and isp router its working at half duplex, I
    > have fitted the router 3weeks ago. Everything there is in my premises.
    >
    >
    > DEgateway#sh controllers fa0/1
    > Interface FastEthernet0/1
    > Hardware is MV96340
    > HWIDB: 46E8F410, INSTANCE: 46E904F0, FASTSEND: 4343B97C, MCI_INDEX: 0
    >
    > Aggregate MIB Counters
    > ----------------------
    > Rx Good Bytes: 151816324 Rx Good Frames: 353042
    > Rx Bad Bytes: 129824 Rx Bad Frames: 1455
    > Rx Broadcast Frames: 2816 Rx Multicast Frames: 1100
    > Tx Good Bytes: 333571839 Tx Good Frames: 405116
    > Tx Broadcast Frames: 10 Tx Multicast Frames: 0
    > Rx+Tx Min-64B Frames: 175318 Rx+Tx 65-127B Frames: 164684
    > Rx+Tx 128-255B Frames: 73991 Rx+Tx 256-511B Frames: 30312
    > Rx+Tx 512-1023B Frames: 35986 Rx+Tx 1024-MaxB Frames: 279322
    > Rx Unrecog MAC Ctrl Frames: 0
    > Rx Good FC Frames: 0 Rx Bad FC Frames: 0
    > Rx Undersize Frames: 0 Rx Fragment Frames: 0
    > Rx Oversize Frames: 0 Rx Jabber Frames: 0
    > Rx MAC Errors: 0 Rx Bad CRCs: 0
    > Tx Collisions: 1455 Tx Late Collisions: 0
    >
    > PHY Registers
    > -------------
    > Register 0x00: 1000 782D 0040 61E4 01E1 0021 0004 2001
    > --More--
    > camocas wrote:
    > > Everything after the gateway I have ping loss... So it means its the
    > > leased line which is having problems? Could it in any change be me???
    > >
    > > Thanks
    > > thrill5 wrote:
    > >
    > > > Sounds like a circuit issue. From the router, ping the next hop on the wan
    > > > circuit and see if you still get ping loss. If you do, you've found the
    > > > problem.
    > > >
    > > > Scott
    > > > "camocas" <> wrote in message
    > > > news:...
    > > > > Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    > > > > I have all configured, ios firewall, ips etc... The current ports Im
    > > > > using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    > > > > got nat to one ip which is also used for the webvpn and vpn
    > > > > connections, my company got around 50 users.
    > > > >
    > > > > The problem its when I ping any outside station I got a ping succcess
    > > > > of 80% ... is like 3 in 3 seconds im loosing 1 datagram. InternallyI
    > > > > ping sucesseful without any problems at all... what could it be this
    > > > > problem? I can ping my gateway IP and its 100% but after that its
    > > > > always 80% ... Really need help! any advice? thanks
    > > > >
    > > > > e.g.
    > > > > DEgateway#ping
    > > > > Protocol [ip]:
    > > > > Target IP address: 158.43.128.72
    > > > > Repeat count [5]: 100
    > > > > Datagram size [100]:
    > > > > Timeout in seconds [2]:
    > > > > Extended commands [n]:
    > > > > Sweep range of sizes [n]:
    > > > > Type escape sequence to abort.
    > > > > Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > > seconds:
    > > > > .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    > > > > ms
    > > > > DEgateway#ping
    > > > > Protocol [ip]: 158.43.128.72
    > > > > % Unknown protocol - "158.43.128.72", type "ping ?" for help
    > > > > DEgateway#ping
    > > > > Protocol [ip]:
    > > > > Target IP address: 158.43.128.72
    > > > > Repeat count [5]: 500
    > > > > Datagram size [100]:
    > > > > Timeout in seconds [2]:
    > > > > Extended commands [n]:
    > > > > Sweep range of sizes [n]:
    > > > > Type escape sequence to abort.
    > > > > Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > > seconds:
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!.!!!!
    > > > > Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    > > > > ms
    > > > > DEgateway#
    > > > >
     
    , Jun 2, 2006
    #5
  6. camocas

    Guest

    Can you post a Show Interface and the Logs?


    camocas wrote:
    > I forgot to include, this is the output of the interface which connects
    > to the outside world, my connection is:
    >
    > LAN¦-------------------------¦CISCO2811¦-publicip-----------¦ROUTER.ISP¦------LEASEDLINE
    >
    > The line btw cisco2811 and isp router its working at half duplex, I
    > have fitted the router 3weeks ago. Everything there is in my premises.
    >
    >
    > DEgateway#sh controllers fa0/1
    > Interface FastEthernet0/1
    > Hardware is MV96340
    > HWIDB: 46E8F410, INSTANCE: 46E904F0, FASTSEND: 4343B97C, MCI_INDEX: 0
    >
    > Aggregate MIB Counters
    > ----------------------
    > Rx Good Bytes: 151816324 Rx Good Frames: 353042
    > Rx Bad Bytes: 129824 Rx Bad Frames: 1455
    > Rx Broadcast Frames: 2816 Rx Multicast Frames: 1100
    > Tx Good Bytes: 333571839 Tx Good Frames: 405116
    > Tx Broadcast Frames: 10 Tx Multicast Frames: 0
    > Rx+Tx Min-64B Frames: 175318 Rx+Tx 65-127B Frames: 164684
    > Rx+Tx 128-255B Frames: 73991 Rx+Tx 256-511B Frames: 30312
    > Rx+Tx 512-1023B Frames: 35986 Rx+Tx 1024-MaxB Frames: 279322
    > Rx Unrecog MAC Ctrl Frames: 0
    > Rx Good FC Frames: 0 Rx Bad FC Frames: 0
    > Rx Undersize Frames: 0 Rx Fragment Frames: 0
    > Rx Oversize Frames: 0 Rx Jabber Frames: 0
    > Rx MAC Errors: 0 Rx Bad CRCs: 0
    > Tx Collisions: 1455 Tx Late Collisions: 0
    >
    > PHY Registers
    > -------------
    > Register 0x00: 1000 782D 0040 61E4 01E1 0021 0004 2001
    > --More--
    > camocas wrote:
    > > Everything after the gateway I have ping loss... So it means its the
    > > leased line which is having problems? Could it in any change be me???
    > >
    > > Thanks
    > > thrill5 wrote:
    > >
    > > > Sounds like a circuit issue. From the router, ping the next hop on the wan
    > > > circuit and see if you still get ping loss. If you do, you've found the
    > > > problem.
    > > >
    > > > Scott
    > > > "camocas" <> wrote in message
    > > > news:...
    > > > > Hi!! I have a cisco 2811 router with adventerprisek9 12.4 ios version,
    > > > > I have all configured, ios firewall, ips etc... The current ports Im
    > > > > using it are FA0/0 which is for lan, and FA0/1 which is for wan... I
    > > > > got nat to one ip which is also used for the webvpn and vpn
    > > > > connections, my company got around 50 users.
    > > > >
    > > > > The problem its when I ping any outside station I got a ping succcess
    > > > > of 80% ... is like 3 in 3 seconds im loosing 1 datagram. InternallyI
    > > > > ping sucesseful without any problems at all... what could it be this
    > > > > problem? I can ping my gateway IP and its 100% but after that its
    > > > > always 80% ... Really need help! any advice? thanks
    > > > >
    > > > > e.g.
    > > > > DEgateway#ping
    > > > > Protocol [ip]:
    > > > > Target IP address: 158.43.128.72
    > > > > Repeat count [5]: 100
    > > > > Datagram size [100]:
    > > > > Timeout in seconds [2]:
    > > > > Extended commands [n]:
    > > > > Sweep range of sizes [n]:
    > > > > Type escape sequence to abort.
    > > > > Sending 100, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > > seconds:
    > > > > .!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!.!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > Success rate is 97 percent (97/100), round-trip min/avg/max = 20/21/28
    > > > > ms
    > > > > DEgateway#ping
    > > > > Protocol [ip]: 158.43.128.72
    > > > > % Unknown protocol - "158.43.128.72", type "ping ?" for help
    > > > > DEgateway#ping
    > > > > Protocol [ip]:
    > > > > Target IP address: 158.43.128.72
    > > > > Repeat count [5]: 500
    > > > > Datagram size [100]:
    > > > > Timeout in seconds [2]:
    > > > > Extended commands [n]:
    > > > > Sweep range of sizes [n]:
    > > > > Type escape sequence to abort.
    > > > > Sending 500, 100-byte ICMP Echos to 158.43.128.72, timeout is 2
    > > > > seconds:
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!
    > > > > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > > > !!!!!.!!!!
    > > > > Success rate is 97 percent (488/500), round-trip min/avg/max = 20/23/40
    > > > > ms
    > > > > DEgateway#
    > > > >
     
    , Jun 2, 2006
    #6
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. =?Utf-8?B?V0pQQw==?=

    Can not ping myself, but can ping others

    =?Utf-8?B?V0pQQw==?=, Dec 25, 2004, in forum: Wireless Networking
    Replies:
    6
    Views:
    6,024
    Chuck
    Dec 26, 2004
  2. Bob Simon
    Replies:
    8
    Views:
    7,230
    John Lamar
    Jan 19, 2005
  3. gruffydd

    ping ping Why

    gruffydd, Dec 28, 2004, in forum: Computer Support
    Replies:
    3
    Views:
    572
    gruffydd
    Dec 29, 2004
  4. ATM
    Replies:
    2
    Views:
    6,603
    Stephen
    Nov 13, 2008
  5. jorgeantibes

    I do ping others and viceversa but, cannot ping myself

    jorgeantibes, May 15, 2009, in forum: Wireless Networking
    Replies:
    0
    Views:
    588
    jorgeantibes
    May 15, 2009
Loading...

Share This Page