Force users to speed?

Discussion in 'Cisco' started by Matt, Jan 24, 2005.

  1. Matt

    Matt Guest

    Is there anyway on an AS5300 or AS5800 to force users dialing up to
    connect at a slower speed? Say instead of 43000 force them to connect
    at 26400 or 20000?
     
    Matt, Jan 24, 2005
    #1
    1. Advertising

  2. Specific users or all?

    Steve
    www.cisco-forum.com

    "Matt" <> wrote in message
    news:...
    > Is there anyway on an AS5300 or AS5800 to force users dialing up to
    > connect at a slower speed? Say instead of 43000 force them to connect at
    > 26400 or 20000?
     
    cisco-forum.com, Jan 25, 2005
    #2
    1. Advertising

  3. Matt

    BradReeseCom Guest

    Matt,

    You can do modem pooling to send the calls based on DNIS to different
    groups of modems.

    You may wish to investigate Cisco's DNIS and Modem Pooling With a PRI
    Line:

    http://www.cisco.com/warp/public/793/access_dial/pri_dnis_mpool.html

    as well as Cisco's Modem-Pooling With DNIS:

    http://www.cisco.com/warp/public/793/access_dial/modem_pooling.html

    Use modemcap to fine tune the characterstics of a modem. This is
    achieved by changing the "S" registers on the modems ( using modemcap,
    s29, s30, s31 etc. ):

    http://www.cisco.com/univercd/cc/td...5300/sw_conf/sw_ports/at_set/atcmnds.htm#4376

    Recommended Modemcaps for Internal Digital and Analog Modems on Cisco
    Access Servers:

    http://www.cisco.com/warp/public/471/recc_modemcaps.html

    Also the Cisco AS5300 Software Configuration Guide:

    http://www.cisco.com/en/US/products...configuration_guide_book09186a008007dfbb.html

    And Configuring an AS5350/AS5400 for Incoming Async and ISDN Calls:

    http://www.cisco.com/en/US/partner/...s_configuration_example09186a0080094a49.shtml

    Sincerely,

    Brad Reese
    BradReese.Com Cisco Repair Worldwide
    United Kingdom: 44-20-70784294
    U.S. Toll Free: 877-549-2680
    International: 828-277-7272
    Fax: 775-254-3558
    Website: http://www.bradreese.com/cisco-big-iron-repair.htm
     
    BradReeseCom, Jan 25, 2005
    #3
  4. Matt

    Matt Guest

    All users.. also.. doing modem max-speed or min-speed is not an option
    due to the IOS version (12.0 and 12.3) that is being run.

    cisco-forum.com wrote:
    > Specific users or all?
    >
    > Steve
    > www.cisco-forum.com
    >
    > "Matt" <> wrote in message
    > news:...
    >
    >>Is there anyway on an AS5300 or AS5800 to force users dialing up to
    >>connect at a slower speed? Say instead of 43000 force them to connect at
    >>26400 or 20000?

    >
    >
    >
     
    Matt, Jan 25, 2005
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. a.metselaar

    speed speed speed

    a.metselaar, Dec 28, 2003, in forum: Computer Support
    Replies:
    14
    Views:
    1,063
    BuffNET Tech Support - MichaelJ
    Dec 30, 2003
  2. Replies:
    0
    Views:
    1,662
  3. Replies:
    0
    Views:
    2,133
  4. Replies:
    0
    Views:
    2,196
  5. Replies:
    2
    Views:
    1,240
    Bert Hyman
    Dec 31, 2008
Loading...

Share This Page