extend_privacy CLID

Discussion in 'Cisco' started by Dan, Feb 15, 2005.

  1. Dan

    Dan Guest

    Hi-

    I have a cisco AS5350 that I am using to gateway VoIP SIP targets to a
    channelized T1. According to Cisco docs [http://tinyurl.com/4jcxq ],
    if I send a RPID string that contains privacy=full, extended_privacy
    should get set to 0x20 and caller ID should not be passed. Clearly as
    you can see below, the extended_privacy gets set to 0x00 and the CLID
    is passed across the serial link. I need to be able to block caller ID
    using the RPID SIP header. I have no idea why this isn't working-- any
    thoughts?

    (names and IPs changed to protect the innocent)

    Thank you for your time,

    Dan Poulsen


    Feb 15 16:22:57.537 EST:
    //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI
    with IP addr: 66.27.32.30:5060
    Feb 15 16:22:57.537 EST:
    //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EST
    to SIP default timezone = GMT
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPISetInfoFromRpid: Received current
    remote name: , current remote number: 2125553720
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPISetInfoFromRpid: Received ;screen=yes
    ;privacy=full -> Setting Octet3A 0xA1, extended_privacy 0x00
    Feb 15 16:22:57.541 EST: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetGtdBody:
    No valid GTD body found.
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIUaddCcbToUASReqTable: ****Adding to
    UAS Request table.
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIUaddCcbToTable: Added to table.
    ccb=0x64E04370 key=8e1147ad004433280bf1af529f9558db16465550533
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    carrier id
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    Incoming called number: 16465550533
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    destination pattern: 2125553720
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/ccsipUpdateIncomingCallParams: ccCallInfo:
    Calling name , number 2125553720, Calling oct3 0x00, oct_3a 0xA1,
    Called number 16465550533
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIGetCallConfig: Peer tag 99 matched for
    incoming call
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIGetCallConfig: Using Voice Class
    Codec, tag = 1
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPICopyPeerDataToCCB:
    >From CLI: Modem NSE payload = 100, Passthrough = 0, Modem relay = 0,

    Gw-Xid = 1
    SPRT latency 200, SPRT Retries = 12, Dict Size = 1024
    String Len = 32, Compress dir = 3
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIContinueNewMsgInvite: Calling name ,
    number 2125553720, Calling oct3 0x00, oct_3a 0xA1, ext_priv 0x00,
    Called number 16465550533, oct3 0x00
    Feb 15 16:22:57.541 EST:
    //-1/98C244A28498/SIP/Info/sipSPIContinueNewMsgInvite: Carrier id code
    , prev_cid NONE, next_cid NONE, prev_tgrp NONE, next_tgrp NONE
    Feb 15 16:22:57.541 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoMediaNegotiation: Number of
    m-lines = 1
    Feb 15 16:22:57.541 EST:
    //1520/98C244A28498/SIP/Info/sipSPISelectCodecVersion: Codec (No Codec
    ) is not in preferred list
    Feb 15 16:22:57.541 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: An exact codec
    match not configured, using interoperable codec g729r8
    Feb 15 16:22:57.541 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: Codec (g729r8)
    Negotiation Successful on Static Payload for m-line 1
    Feb 15 16:22:57.541 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoPtimeNegotiation: No ptime present
    or multiple ptime attributes that can't be handled
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line index
    1
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoDTMFRelayNegotiation: Requested
    DTMF-RELAY option(s) not found in Preferred DTMF-RELAY option list!
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIStreamTypeAndDtmfRelay: DTMF Relay
    mode: Inband Voice
    Feb 15 16:22:57.545 EST:
    //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: NSE
    payload from X-cap = 0
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sip_do_nse_negotiation: SDP not present.
    Use local NSE payload 100.
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sip_select_modem_relay_params: X-tmr not
    present in SDP. Disable modem relay
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIGetSDPDirectionAttribute: No
    direction attribute present or multiple direction attributes that can't
    be handled for m-line:1 and num-a-lines:0
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: Codec
    negotiation successful for media line 1
    payload_type=18, codec_bytes=20, codec=g729r8,
    dtmf_relay=inband-voice
    stream_type=voice-only (0), dest_ip_address=66.27.32.42,
    dest_port=39110
    Feb 15 16:22:57.545 EST:
    //1520/98C244A28498/SIP/Info/sipSPIHandleInviteMedia:
    Negotiated Codec : g729r8, bytes :20
    Preferred Codec : g729r8, bytes :20
    Preferred DTMF relay 1 : 0
    Preferred DTMF relay 2 : 0
    Negotiated DTMF relay : 0
    Preferred and Negotiated NTE payloads: 101 0
    Preferred and Negotiated NSE payloads: 100 100
    Preferred and Negotiated Modem Relay: 0 0
    Preferred and Negotiated Modem Relay GwXid: 1 0
    Dan, Feb 15, 2005
    #1
    1. Advertising

  2. Dan

    bronson Guest

    Dan wrote:
    > Hi-
    >
    > I have a cisco AS5350 that I am using to gateway VoIP SIP targets to

    a
    > channelized T1. According to Cisco docs [http://tinyurl.com/4jcxq ],
    > if I send a RPID string that contains privacy=full, extended_privacy
    > should get set to 0x20 and caller ID should not be passed. Clearly

    as
    > you can see below, the extended_privacy gets set to 0x00 and the CLID
    > is passed across the serial link. I need to be able to block caller

    ID
    > using the RPID SIP header. I have no idea why this isn't working--

    any
    > thoughts?
    >
    > (names and IPs changed to protect the innocent)
    >
    > Thank you for your time,
    >
    > Dan Poulsen
    >
    >
    > Feb 15 16:22:57.537 EST:
    > //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI
    > with IP addr: 66.27.32.30:5060
    > Feb 15 16:22:57.537 EST:
    > //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone

    EST
    > to SIP default timezone = GMT
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPISetInfoFromRpid: Received current
    > remote name: , current remote number: 2125553720
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPISetInfoFromRpid: Received

    ;screen=yes
    > ;privacy=full -> Setting Octet3A 0xA1, extended_privacy 0x00
    > Feb 15 16:22:57.541 EST: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetGtdBody:
    > No valid GTD body found.
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIUaddCcbToUASReqTable: ****Adding to
    > UAS Request table.
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIUaddCcbToTable: Added to table.
    > ccb=0x64E04370 key=8e1147ad004433280bf1af529f9558db16465550533
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    > carrier id
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    > Incoming called number: 16465550533
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIMatchSrcIpGroup: Match not found on
    > destination pattern: 2125553720
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/ccsipUpdateIncomingCallParams: ccCallInfo:
    > Calling name , number 2125553720, Calling oct3 0x00, oct_3a 0xA1,
    > Called number 16465550533
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIGetCallConfig: Peer tag 99 matched

    for
    > incoming call
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIGetCallConfig: Using Voice Class
    > Codec, tag = 1
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPICopyPeerDataToCCB:
    > >From CLI: Modem NSE payload = 100, Passthrough = 0, Modem relay = 0,

    > Gw-Xid = 1
    > SPRT latency 200, SPRT Retries = 12, Dict Size = 1024
    > String Len = 32, Compress dir = 3
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIContinueNewMsgInvite: Calling name ,
    > number 2125553720, Calling oct3 0x00, oct_3a 0xA1, ext_priv 0x00,
    > Called number 16465550533, oct3 0x00
    > Feb 15 16:22:57.541 EST:
    > //-1/98C244A28498/SIP/Info/sipSPIContinueNewMsgInvite: Carrier id

    code
    > , prev_cid NONE, next_cid NONE, prev_tgrp NONE, next_tgrp NONE
    > Feb 15 16:22:57.541 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoMediaNegotiation: Number of
    > m-lines = 1
    > Feb 15 16:22:57.541 EST:
    > //1520/98C244A28498/SIP/Info/sipSPISelectCodecVersion: Codec (No

    Codec
    > ) is not in preferred list
    > Feb 15 16:22:57.541 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: An exact codec
    > match not configured, using interoperable codec g729r8
    > Feb 15 16:22:57.541 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: Codec (g729r8)
    > Negotiation Successful on Static Payload for m-line 1
    > Feb 15 16:22:57.541 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoPtimeNegotiation: No ptime

    present
    > or multiple ptime attributes that can't be handled
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoDTMFRelayNegotiation: m-line

    index
    > 1
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoDTMFRelayNegotiation: Requested
    > DTMF-RELAY option(s) not found in Preferred DTMF-RELAY option list!
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIStreamTypeAndDtmfRelay: DTMF Relay
    > mode: Inband Voice
    > Feb 15 16:22:57.545 EST:
    > //-1/xxxxxxxxxxxx/SIP/Info/sip_sdp_get_modem_relay_cap_params: NSE
    > payload from X-cap = 0
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sip_do_nse_negotiation: SDP not present.
    > Use local NSE payload 100.
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sip_select_modem_relay_params: X-tmr not
    > present in SDP. Disable modem relay
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIGetSDPDirectionAttribute: No
    > direction attribute present or multiple direction attributes that

    can't
    > be handled for m-line:1 and num-a-lines:0
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIDoAudioNegotiation: Codec
    > negotiation successful for media line 1
    > payload_type=18, codec_bytes=20, codec=g729r8,
    > dtmf_relay=inband-voice
    > stream_type=voice-only (0), dest_ip_address=66.27.32.42,
    > dest_port=39110
    > Feb 15 16:22:57.545 EST:
    > //1520/98C244A28498/SIP/Info/sipSPIHandleInviteMedia:
    > Negotiated Codec : g729r8, bytes :20
    > Preferred Codec : g729r8, bytes :20
    > Preferred DTMF relay 1 : 0
    > Preferred DTMF relay 2 : 0
    > Negotiated DTMF relay : 0
    > Preferred and Negotiated NTE payloads: 101 0
    > Preferred and Negotiated NSE payloads: 100 100
    > Preferred and Negotiated Modem Relay: 0 0
    > Preferred and Negotiated Modem Relay GwXid: 1 0
    bronson, Feb 15, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Ivana

    CLID on WIC-2AM

    Ivana, Sep 24, 2004, in forum: Cisco
    Replies:
    7
    Views:
    578
    Aaron Leonard
    Oct 1, 2004
  2. Mac

    CLID problem

    Mac, Mar 17, 2005, in forum: Cisco
    Replies:
    2
    Views:
    1,804
    hackvoip
    Jan 9, 2009
  3. Mac

    CLID problem

    Mac, Mar 17, 2005, in forum: VOIP
    Replies:
    1
    Views:
    617
    JDBalogh
    Mar 22, 2005
  4. Henry Cabot Henhouse III

    multiple adapters, same clid

    Henry Cabot Henhouse III, Jul 24, 2005, in forum: VOIP
    Replies:
    0
    Views:
    417
    Henry Cabot Henhouse III
    Jul 24, 2005
  5. alexd
    Replies:
    11
    Views:
    991
Loading...

Share This Page