dnis and router config

Discussion in 'VOIP' started by Jimmyzshack, Nov 26, 2003.

  1. Jimmyzshack

    Jimmyzshack Guest

    I have a 3640 and 2 voice T-1's on one of i have two inbound 800 numbers. I
    now have dnis turned on on the t-1. does someone have a sample config on
    how to route the two different 800 to different ext on callmanager. Our
    point me in the right direct what to look for on cisco site for this.
    thanks,
    Jimmyzshack, Nov 26, 2003
    #1
    1. Advertising

  2. Jimmyzshack wrote:

    > I have a 3640 and 2 voice T-1's on one of i have two inbound 800 numbers. I
    > now have dnis turned on on the t-1. does someone have a sample config on
    > how to route the two different 800 to different ext on callmanager. Our
    > point me in the right direct what to look for on cisco site for this.
    > thanks,

    It's fairly simple. I'm guessing that you get a called line ID as
    800111111 and 800222222 or something to that effect. In that case you
    could do something like :

    translation rule 1
    Rule 1 800111111 1000
    Rule 2 800222222 2000
    !
    dial-peer voice 2 voip
    destination-pattern 800......
    translate-outgoing called 1
    session target ipv4:<ip-of-your-cm>
    dtmf-relay h245-alphanumeric


    --
    Arnold

    http://www.ligtvoet.org
    Ask smart questions : http://www.catb.org/~esr/faqs/smart-questions.html
    Arnold Ligtvoet, Nov 27, 2003
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Jimmyzshack

    dnis router config help

    Jimmyzshack, Nov 26, 2003, in forum: Cisco
    Replies:
    1
    Views:
    473
    CCIE8122
    Nov 27, 2003
  2. Matt
    Replies:
    0
    Views:
    462
  3. Matt
    Replies:
    1
    Views:
    536
    Aaron Leonard
    Oct 19, 2004
  4. rihad

    dnis bypass default

    rihad, Dec 19, 2007, in forum: Cisco
    Replies:
    1
    Views:
    395
    Doug McIntyre
    Dec 19, 2007
  5. rihad

    dnis bypass default

    rihad, Dec 19, 2007, in forum: Cisco
    Replies:
    0
    Views:
    367
    rihad
    Dec 19, 2007
Loading...

Share This Page