Cross Domain Connection Issues

Discussion in 'MCSE' started by Blaze, Feb 20, 2005.

  1. Blaze

    Blaze Guest

    I have 2 domains, Domain A has 2 W2003 DC's and Domain B has 1 W2K DC.

    The 2003 servers have just been upgraded and there was a 2 way trust between
    the Domains..

    This 2 way trust was reset up with the New Domain A 2003 server

    When I log onto Domain B client as a Domain B user and I try to acess a
    folder on Domain A I get a "there are currently no logon servers available
    to service the logon request" Error

    When I log on to Domain B as a Domain A user everything works fine.

    When I go onto Domain B's Trust MMC and click verify for Domain A i get the
    following error.."the secure channel (sc) reset on the domain controller to
    failed with the error there are currently no logon servers available to
    service the logon request"

    Help... Any Ideas

    Thanks
    Blaze, Feb 20, 2005
    #1
    1. Advertising

  2. You could try to recreate that trust or use nltest to reset it.

    http://support.microsoft.com/default.aspx?scid=kb;EN-US;158148

    More than likely you have a name resolution problem to fix first - either
    netbios or dns. Try to ping each domain controller in domain A from domain B
    by IP address and name, both netbios and fully qualified domain name to see
    what happens. If using wins, have the wins servers in each domain replicate
    with the wins server in the other domain. Make sure the Windows 2000 domain
    controller is configured to have a secondary dns zone for the Windows 2003
    domain and that it is replicating properly. The Windows 2003 domain can
    simply use conditional forwarding to the Windows 2000 domain controller for
    dns name resolution of that domain. If you are not using wins you can try
    using a lmhosts file on the pdc fsmo in each domain to point to the pdc fsmo
    in the other domain. --- Steve

    http://support.microsoft.com/default.aspx?scid=kb;en-us;314108 --- how to
    create lmhosts file. Note that syntax is case sensitive and that the saved
    lmhosts file must not have an extension.

    "Blaze" <> wrote in message
    news:618Sd.398$...
    >I have 2 domains, Domain A has 2 W2003 DC's and Domain B has 1 W2K DC.
    >
    > The 2003 servers have just been upgraded and there was a 2 way trust
    > between the Domains..
    >
    > This 2 way trust was reset up with the New Domain A 2003 server
    >
    > When I log onto Domain B client as a Domain B user and I try to acess a
    > folder on Domain A I get a "there are currently no logon servers available
    > to service the logon request" Error
    >
    > When I log on to Domain B as a Domain A user everything works fine.
    >
    > When I go onto Domain B's Trust MMC and click verify for Domain A i get
    > the following error.."the secure channel (sc) reset on the domain
    > controller to failed with the error there are currently no logon servers
    > available to service the logon request"
    >
    > Help... Any Ideas
    >
    > Thanks
    >
    Steven L Umbach, Feb 20, 2005
    #2
    1. Advertising

  3. Blaze

    Blaze Guest

    Thanks for the info Steven... but I can from each domain find the other
    servers and clients on the other domain by pinging the client/server names
    and I get an ip resolution..?

    would this be the issue you are trying to resolve ?

    Thanks

    "Steven L Umbach" <> wrote in message
    news:...
    > You could try to recreate that trust or use nltest to reset it.
    >
    > http://support.microsoft.com/default.aspx?scid=kb;EN-US;158148
    >
    > More than likely you have a name resolution problem to fix first - either
    > netbios or dns. Try to ping each domain controller in domain A from domain
    > B by IP address and name, both netbios and fully qualified domain name to
    > see what happens. If using wins, have the wins servers in each domain
    > replicate with the wins server in the other domain. Make sure the Windows
    > 2000 domain controller is configured to have a secondary dns zone for the
    > Windows 2003 domain and that it is replicating properly. The Windows 2003
    > domain can simply use conditional forwarding to the Windows 2000 domain
    > controller for dns name resolution of that domain. If you are not using
    > wins you can try using a lmhosts file on the pdc fsmo in each domain to
    > point to the pdc fsmo in the other domain. --- Steve
    >
    > http://support.microsoft.com/default.aspx?scid=kb;en-us;314108 --- how to
    > create lmhosts file. Note that syntax is case sensitive and that the saved
    > lmhosts file must not have an extension.
    >
    > "Blaze" <> wrote in message
    > news:618Sd.398$...
    >>I have 2 domains, Domain A has 2 W2003 DC's and Domain B has 1 W2K DC.
    >>
    >> The 2003 servers have just been upgraded and there was a 2 way trust
    >> between the Domains..
    >>
    >> This 2 way trust was reset up with the New Domain A 2003 server
    >>
    >> When I log onto Domain B client as a Domain B user and I try to acess a
    >> folder on Domain A I get a "there are currently no logon servers
    >> available to service the logon request" Error
    >>
    >> When I log on to Domain B as a Domain A user everything works fine.
    >>
    >> When I go onto Domain B's Trust MMC and click verify for Domain A i get
    >> the following error.."the secure channel (sc) reset on the domain
    >> controller to failed with the error there are currently no logon servers
    >> available to service the logon request"
    >>
    >> Help... Any Ideas
    >>
    >> Thanks
    >>

    >
    >
    Blaze, Feb 21, 2005
    #3
  4. Blaze

    Todd J Heron Guest

    Now that Steven has led you to rule out name resolution, let's take a look
    at some binding order on a problem machine. Go to Start > Settings >
    double-click on Network Connections > Advanced > Settings > Local Area
    Network connection adapter should be listed on top. Any other connections
    should be listed beneath.

    --
    Todd J Heron, MCSE
    Windows Server 2003/2000/NT
    ----------------------------------------------------------------------------
    This posting is provided "as is" with no warranties and confers no rights
    Todd J Heron, Feb 21, 2005
    #4
  5. Blaze

    Blaze Guest

    Mmmmm ... getting intresting...I will check it out tomorrow, as the one
    server has 1 nic and the other 1 as well I think the nics will be on top


    "Todd J Heron" <> wrote in message
    news:...
    > Now that Steven has led you to rule out name resolution, let's take a look
    > at some binding order on a problem machine. Go to Start > Settings >
    > double-click on Network Connections > Advanced > Settings > Local Area
    > Network connection adapter should be listed on top. Any other connections
    > should be listed beneath.
    >
    > --
    > Todd J Heron, MCSE
    > Windows Server 2003/2000/NT
    > ----------------------------------------------------------------------------
    > This posting is provided "as is" with no warranties and confers no rights
    >
    >
    Blaze, Feb 22, 2005
    #5
  6. Blaze

    Todd J Heron Guest

    Let us know what you find out!

    --
    Todd J Heron, MCSE
    Windows Server 2003/2000/NT
    ----------------------------------------------------------------------------
    This posting is provided "as is" with no warranties and confers no rights
    Todd J Heron, Feb 22, 2005
    #6
  7. Blaze

    Blaze Guest

    Ok... Thanks for all the help people... After the DNS issues and the Binding
    order.. I decided to reset the Trusts between the Doamins and its all
    started working fine :)

    Thanks again... because with out you lot where the heck would we be...

    Cheers


    "Todd J Heron" <> wrote in message
    news:...
    > Let us know what you find out!
    >
    > --
    > Todd J Heron, MCSE
    > Windows Server 2003/2000/NT
    > ----------------------------------------------------------------------------
    > This posting is provided "as is" with no warranties and confers no rights
    >
    >
    Blaze, Feb 22, 2005
    #7
  8. Blaze

    Guest Guest

    RESPONSE FROM SHAFIY2K:

    Hi

    You had mentioned a problem in between two differnnt
    servers in different domains, Domain A --> W2k3 Servers
    having just upgraded, and Domain B --> W2k Servers is
    remain the same. You had got a problem with Trust
    relationship in between two Domain controllers.

    As per my aspects i thing the Active Directory
    database is not distrubed in the Windows2000 sever
    (Domain B)and it is constant. But, you had told that the
    the Domain A having Windows 2000 servers has been
    upgraded to Windows 2003 servers, so you have to update
    the Active directory database that reflects the same of
    connecting of Trusted domain and Trusting domain is
    mentioned.

    May be you have to reconfigure the trust relationship
    in a Domain A to update your Active Directory database
    in Domain A of a new servers. After doing this reboot
    the server and try to reconnect the two domains!!!

    With regards
    Shafi.H
    Guest, Mar 16, 2005
    #8
  9. Blaze

    Neil Guest

    did you hear SHAFIY2K <> reply
    to..wait I'm not sure what he's replying to. But did you hear it? NO? Is
    that becuase you have no idea what the original Question was? Me either!
    Do you think that he's replying to the voices in his head? could be...

    maybe he should try this:
    http://www.stopabductions.com/

    but wait! the referenceID (<618Sd.398$>) DID
    have the original post. oooo, my bad. I should have had that still on my
    system from Feb 20th. A MONTH AGO???!?

    PLEASE....PLEASE...PLEASE...reference the original...


    --
    Neil MCNGP#30

    - "This is power steering," he said automatically.
    Neil, Mar 16, 2005
    #9
  10. Neil wrote:
    > did you hear SHAFIY2K <> reply
    > to..wait I'm not sure what he's replying to. But did you hear it? NO?
    > Is that becuase you have no idea what the original Question was? Me
    > either! Do you think that he's replying to the voices in his head?
    > could be...
    >
    > maybe he should try this:
    > http://www.stopabductions.com/
    >
    > but wait! the referenceID (<618Sd.398$>)
    > DID have the original post. oooo, my bad. I should have had that
    > still on my system from Feb 20th. A MONTH AGO???!?
    >
    > PLEASE....PLEASE...PLEASE...reference the original...


    HE IS COMPU-PIKACHU AND I CLAIM MY TWO-FIFTY
    =?Windows-1252?Q?Frisbee=AE?=, Mar 16, 2005
    #10
  11. Blaze

    CBIC Guest

    > HE IS COMPU-PIKACHU AND I CLAIM MY TWO-FIFTY

    I disagree. He actually has some useful knowledge therefore he cannot be cp.
    --
    aka
    Doom MCNGP #38
    How in the hell did you get access to a computer?
    www.mcngp.com invented the internet
    CBIC, Mar 16, 2005
    #11
  12. CBIC wrote:
    >> HE IS COMPU-PIKACHU AND I CLAIM MY TWO-FIFTY

    >
    > I disagree. He actually has some useful knowledge therefore he cannot
    > be cp.


    Good point.

    Then maybe he's ASPERGERS SYNDROME
    =?Windows-1252?Q?Frisbee=AE?=, Mar 16, 2005
    #12
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Vijaya
    Replies:
    2
    Views:
    26,656
    theapplebee
    Oct 31, 2009
  2. bfullen

    Cross Domain Connection Issue

    bfullen, Jun 9, 2008, in forum: Software
    Replies:
    0
    Views:
    680
    bfullen
    Jun 9, 2008
  3. bfullen

    Cross Domain Connection Issue

    bfullen, Jun 9, 2008, in forum: MCSE
    Replies:
    0
    Views:
    346
    bfullen
    Jun 9, 2008
  4. Limited Wisdom
    Replies:
    7
    Views:
    775
    Jonathan Roberts
    Sep 13, 2006
  5. saurabhm
    Replies:
    3
    Views:
    4,004
    saurabhm
    Sep 18, 2009
Loading...

Share This Page