connect two vlans and nat on cisco 2811

Discussion in 'Cisco' started by zaprian, Feb 27, 2009.

  1. zaprian

    zaprian

    Joined:
    Feb 20, 2009
    Messages:
    2
    hi guys,
    i have one problem.we have vlan 196 with ip address x.x.x.6 255.255.255.252 and gateway x.x.x.5 ( this is the internet ), and vlan 197 with ip address 192.168.222.2 255.255.255.248, gateway 192.168.222.1 .both vlans was given to us by our ISP.so i connect the wan port of the router directly to the media convertor.on this wan port i have to connect 196 and 197 vlans and to nat it to one of the lan port ( network 192.168.1.0 / 25 ).so when i work on pc in 192.168.1.0 network i have to browse internet and see the computers in vlan 197.i have never do this before and i'm a little bit confused solving this problem.can anyone guide me what i must do?thank you
    zaprian, Feb 27, 2009
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. punisher
    Replies:
    2
    Views:
    2,055
    Charles Deling
    Nov 17, 2005
  2. uchapahwa@yahoo.co.uk
    Replies:
    1
    Views:
    1,123
    Doug McIntyre
    Dec 15, 2006
  3. uchapahwa@yahoo.co.uk
    Replies:
    0
    Views:
    442
    uchapahwa@yahoo.co.uk
    Dec 15, 2006
  4. geneveve
    Replies:
    1
    Views:
    1,631
    lalitgoyal
    Dec 29, 2008
  5. dylan@thurstonco.com
    Replies:
    0
    Views:
    1,221
    dylan@thurstonco.com
    Feb 13, 2009
Loading...

Share This Page