Cisco PIX Port Forwarding

Discussion in 'Cisco' started by Salus, Oct 20, 2003.

  1. Salus

    Salus Guest

    Hi,

    How to translate something like :

    rdr x10 192.168.10.15/32 port 16024 -> 192.168.177.24 port 6502 udp
    rdr x10 192.168.10.15/32 port 16025 -> 192.168.177.25 port 6502 udp
    rdr x10 192.168.10.15/32 port 16026 -> 192.168.177.26 port 6502 udp
    rdr x10 192.168.10.15/32 port 16027 -> 192.168.177.27 port 6502 udp
    rdr x10 192.168.10.15/32 port 16028 -> 192.168.177.28 port 6502 udp
    rdr xl0 192.168.10.15/32 port 16031 -> 192.168.177.31 port 6502 udp
    rdr x10 192.168.10.15/32 port 16041 -> 192.168.177.41 port 6502 udp
    rdr x10 192.168.10.15/32 port 16042 -> 192.168.177.42 port 6502 udp

    into PIX rules??

    Thanks,

    Sebastien
    Salus, Oct 20, 2003
    #1
    1. Advertising

  2. Salus

    Ivan Ostres Guest

    "Salus" <> wrote in message
    news:...
    > Hi,
    >
    > How to translate something like :
    >
    > rdr x10 192.168.10.15/32 port 16024 -> 192.168.177.24 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16025 -> 192.168.177.25 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16026 -> 192.168.177.26 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16027 -> 192.168.177.27 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16028 -> 192.168.177.28 port 6502 udp
    > rdr xl0 192.168.10.15/32 port 16031 -> 192.168.177.31 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16041 -> 192.168.177.41 port 6502 udp
    > rdr x10 192.168.10.15/32 port 16042 -> 192.168.177.42 port 6502 udp
    >
    > into PIX rules??
    >


    IMHO, like this: (only the first line, other are similar)

    static (inside,outside) udp 192.168.177.24 6502 192.168.10.15 16024 netmask
    255.255.255.255 0 0

    if first addresses in your rdr command is "inside" and second address is
    "outside".

    Ivan
    Ivan Ostres, Oct 20, 2003
    #2
    1. Advertising

  3. "Ivan Ostres" <> wrote:

    >> How to translate something like :
    >>
    >> rdr x10 192.168.10.15/32 port 16024 -> 192.168.177.24 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16025 -> 192.168.177.25 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16026 -> 192.168.177.26 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16027 -> 192.168.177.27 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16028 -> 192.168.177.28 port 6502 udp
    >> rdr xl0 192.168.10.15/32 port 16031 -> 192.168.177.31 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16041 -> 192.168.177.41 port 6502 udp
    >> rdr x10 192.168.10.15/32 port 16042 -> 192.168.177.42 port 6502 udp
    >>
    >> into PIX rules??

    >
    > IMHO, like this: (only the first line, other are similar)
    >
    > static (inside,outside) udp 192.168.177.24 6502 192.168.10.15 16024 netmask 255.255.255.255 0 0
    >
    > if first addresses in your rdr command is "inside" and second address is
    > "outside".


    If 192.168.10.15 is an outside IP and 192.168.177.X is an inside IP range
    then the commands should look alike this

    static (inside,outside) udp 192.168.10.15 16024 192.168.177.24 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16025 192.168.177.25 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16026 192.168.177.26 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16027 192.168.177.27 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16028 192.168.177.28 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16031 192.168.177.31 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16041 192.168.177.41 6502 netmask 255.255.255.255 0 0
    static (inside,outside) udp 192.168.10.15 16042 192.168.177.42 6502 netmask 255.255.255.255 0 0
    Jyri Korhonen, Oct 20, 2003
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Corbin O'Reilly

    [HELP] Cisco PIX 515 Port Forwarding

    Corbin O'Reilly, Sep 26, 2003, in forum: Cisco
    Replies:
    4
    Views:
    8,227
    Walter Roberson
    Sep 26, 2003
  2. Andras Kende
    Replies:
    1
    Views:
    7,078
    Walter Roberson
    Apr 29, 2004
  3. Rodney Hall
    Replies:
    9
    Views:
    8,408
    Walter Roberson
    Jan 13, 2005
  4. buy200kcisco
    Replies:
    1
    Views:
    4,391
    Walter Roberson
    Sep 30, 2004
  5. Replies:
    10
    Views:
    1,601
Loading...

Share This Page