Cisco PIX 506e Firewall - Routing

Discussion in 'General Computer Support' started by jnk, May 18, 2009.

  1. jnk

    jnk

    Joined:
    May 18, 2009
    Messages:
    1
    I’m looking to route traffic between networks sitting two levels deep to a PIX firewall. My example assumes ICMP is permitted in and out of the PIX. The question is about the routing limitations of a PIX.

    1.0.0.0/24<>RouterA<>2.0.0.0/24<>PIX<>3.0.0.0/24<>RouterB<>4.0.0.0/24

    2.0.0.0 Inside Interface

    3.0.0.0 Outside Interface

    To PING from 1.0.0.0 to 4.0.0.0 I added:
    route outside 4.0.0.0 255.255.255.0 RouterB IP

    To PING from 4.0.0.0 to 1.0.0.0 I added:
    route inside 1.0.0.0 255.255.255.0 RouterA IP

    Is this correct as long as the routers have the correct routes established?

    JNK
     
    jnk, May 18, 2009
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Erik Voldengen

    PIX 506e routing question

    Erik Voldengen, Jan 15, 2004, in forum: Cisco
    Replies:
    1
    Views:
    479
    Walter Roberson
    Jan 15, 2004
  2. Rodney Hall
    Replies:
    9
    Views:
    8,593
    Walter Roberson
    Jan 13, 2005
  3. toureg69@yahoo.com

    PIX 506e FireWall and Cisco VPNClient 4.6

    toureg69@yahoo.com, Apr 3, 2005, in forum: Cisco
    Replies:
    3
    Views:
    742
    toureg69@yahoo.com
    Apr 5, 2005
  4. rashid_tse

    cisco pix 506e firewall

    rashid_tse, Jun 6, 2007, in forum: Cisco
    Replies:
    0
    Views:
    426
    rashid_tse
    Jun 6, 2007
  5. Uberwilhelm

    Cisco 506E PIX/Firewall Question

    Uberwilhelm, Aug 29, 2007, in forum: Hardware
    Replies:
    2
    Views:
    867
    Uberwilhelm
    Aug 30, 2007
Loading...

Share This Page