Cisco PDM on a PIX 515E

Discussion in 'Cisco' started by Scooty, Feb 14, 2007.

  1. Scooty

    Scooty Guest

    Hi
    The Cisco PIX 515E is all pretty new to me and to be perfectly honest
    it's doing my head in.
    I am sure that the PIX has all the neccessary licenses etc to run the
    Cisco PDM but when I try and run it the browser window tells me it is
    'Loading PIX Device Manager. Please wait...' but then just sits there
    with an hour glass doing it's thing never actually allowing me to
    access the PDM

    I have attached the sh ver to show that it should work, are there any
    reasons why this is not starting / working?

    pix# sh ver

    Cisco PIX Firewall Version 6.3(4)
    Cisco PIX Device Manager Version 3.0(2)

    Compiled on Fri 02-Jul-04 00:07 by morlee

    pix up 113 days 21 hours

    Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
    Flash E28F128J3 @ 0x300, 16MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB

    Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
    0: ethernet0: address is 0014.1c42.ce46, irq 10
    1: ethernet1: address is 0014.1c42.ce47, irq 11
    2: ethernet2: address is 000d.880f.db68, irq 11
    3: ethernet3: address is 000d.880f.db69, irq 10
    4: ethernet4: address is 000d.880f.db6a, irq 9
    5: ethernet5: address is 000d.880f.db6b, irq 5
    Licensed Features:
    Failover: Enabled
    VPN-DES: Enabled
    VPN-3DES-AES: Enabled
    Maximum Physical Interfaces: 6
    Maximum Interfaces: 10
    Cut-through Proxy: Enabled
    Guards: Enabled
    URL-filtering: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    IKE peers: Unlimited

    This PIX has an Unrestricted (UR) license.

    Serial Number: 809181550 (0x303b216e)
    Running Activation Key: <snip>
    Configuration last modified by enable_15 at 11:45:01.221 WST Wed Feb
    14 2007


    Cheers

    Scott
    Scooty, Feb 14, 2007
    #1
    1. Advertising

  2. In article <>,
    Scooty <> wrote:
    >The Cisco PIX 515E is all pretty new to me and to be perfectly honest
    >it's doing my head in.
    >I am sure that the PIX has all the neccessary licenses etc to run the
    >Cisco PDM but when I try and run it the browser window tells me it is
    >'Loading PIX Device Manager. Please wait...' but then just sits there
    >with an hour glass doing it's thing never actually allowing me to
    >access the PDM


    Your version of Java might be too -new-. PDM doesn't work with
    the last couple of java releases.
    Walter Roberson, Feb 14, 2007
    #2
    1. Advertising

  3. Scooty

    Scooty Guest

    Just a side note
    http server enable
    http 192.168.100.0 25.255.255.0 inside

    pdm location myhost 255.255.255.255 inside

    Am I missing something?

    Scott


    On Feb 14, 1:07 pm, "Scooty" <> wrote:
    > Hi
    > The Cisco PIX 515E is all pretty new to me and to be perfectly honest
    > it's doing my head in.
    > I am sure that the PIX has all the neccessary licenses etc to run the
    > Cisco PDM but when I try and run it the browser window tells me it is
    > 'Loading PIX Device Manager. Please wait...' but then just sits there
    > with an hour glass doing it's thing never actually allowing me to
    > access the PDM
    >
    > I have attached the sh ver to show that it should work, are there any
    > reasons why this is not starting / working?
    >
    > pix# sh ver
    >
    > Cisco PIX Firewall Version 6.3(4)
    > Cisco PIX Device Manager Version 3.0(2)
    >
    > Compiled on Fri 02-Jul-04 00:07 by morlee
    >
    > pix up 113 days 21 hours
    >
    > Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
    > Flash E28F128J3 @ 0x300, 16MB
    > BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    >
    > Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
    > 0: ethernet0: address is 0014.1c42.ce46, irq 10
    > 1: ethernet1: address is 0014.1c42.ce47, irq 11
    > 2: ethernet2: address is 000d.880f.db68, irq 11
    > 3: ethernet3: address is 000d.880f.db69, irq 10
    > 4: ethernet4: address is 000d.880f.db6a, irq 9
    > 5: ethernet5: address is 000d.880f.db6b, irq 5
    > Licensed Features:
    > Failover: Enabled
    > VPN-DES: Enabled
    > VPN-3DES-AES: Enabled
    > Maximum Physical Interfaces: 6
    > Maximum Interfaces: 10
    > Cut-through Proxy: Enabled
    > Guards: Enabled
    > URL-filtering: Enabled
    > Inside Hosts: Unlimited
    > Throughput: Unlimited
    > IKE peers: Unlimited
    >
    > This PIX has an Unrestricted (UR) license.
    >
    > Serial Number: 809181550 (0x303b216e)
    > Running Activation Key: <snip>
    > Configuration last modified by enable_15 at 11:45:01.221 WST Wed Feb
    > 14 2007
    >
    > Cheers
    >
    > Scott
    Scooty, Feb 14, 2007
    #3
  4. In article <>,
    Scooty <> wrote:
    >Just a side note
    >http server enable
    >http 192.168.100.0 25.255.255.0 inside


    >pdm location myhost 255.255.255.255 inside


    >Am I missing something?


    Only if your host isn't part of 192.168.100.0, or if you are trying
    to access from outside.

    The pdm location command should effectively be considered a comment;
    it is used for annotating PDM listings, not for any kind of
    access control.
    Walter Roberson, Feb 14, 2007
    #4
  5. Scooty

    mak Guest

    Walter Roberson wrote:
    > In article <>,
    > Scooty <> wrote:
    >> The Cisco PIX 515E is all pretty new to me and to be perfectly honest
    >> it's doing my head in.
    >> I am sure that the PIX has all the neccessary licenses etc to run the
    >> Cisco PDM but when I try and run it the browser window tells me it is
    >> 'Loading PIX Device Manager. Please wait...' but then just sits there
    >> with an hour glass doing it's thing never actually allowing me to
    >> access the PDM

    >
    > Your version of Java might be too -new-. PDM doesn't work with
    > the last couple of java releases.



    PIX Device Manager (PDM) versions 3.0(1) , 3.0(2), 4.0(1), and 4.1(1), and IDS Device Manager (IDM) version 5.0(1), are
    incompatible with Java Plug-in versions 1.4.2_08 and 1.5.0_02 or later. If these Java Plug-ins are used in conjunction
    with the impacted PDM or IDM releases, the application will not load.


    http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_field_notice09186a008046c805.shtml

    M
    mak, Feb 14, 2007
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Replies:
    4
    Views:
    9,058
  2. Romeo
    Replies:
    1
    Views:
    465
    Walter Roberson
    Mar 20, 2006
  3. Speed3ple
    Replies:
    0
    Views:
    2,987
    Speed3ple
    Apr 4, 2006
  4. Michiel
    Replies:
    4
    Views:
    4,646
    Michiel
    Aug 22, 2006
  5. Michiel
    Replies:
    2
    Views:
    801
    Michiel
    Aug 22, 2006
Loading...

Share This Page