cisco isdn problems

Discussion in 'Cisco' started by ahiyaz@gmail.com, Jun 14, 2006.

  1. Guest

    hi
    I'm trying to establish a point to point Isdn connection , between two
    remote sites.
    >From the center router I'm able to connect to different sites .

    I even tried to attach an AT command string to the dialer , to reduce
    the Channel speed to 56k as follows :

    chat-script isdn "" "atq1e0" OK "at&n38&w&y"
    int dialer 4
    dialer string xxxxx modem-script isdn

    the central site is Tel Aviv and the remote is NY USA.

    does any one have any idea ?
    I've attached configuration and log from the USA site router.
    Thank's
    Ahiya zadok

    tel aviv router

    Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory
    flash:c2800nm-advipservicesk9-mz.124-7.bin -- Version 12.4(4)T1

    configuration

    interface BRI1/3
    description "Backup Dialers to France and USA"
    no ip address
    encapsulation ppp
    dialer pool-member 4 max-link 1
    dialer pool-member 5 max-link 1
    isdn switch-type basic-net3
    ppp authentication chap callin
    ppp multilink

    interface Dialer4
    description "Backup Dialer to USA"
    ip address 172.30.1.1 255.255.255.252
    encapsulation ppp
    dialer pool 5
    dialer string xxxxxxx
    dialer-group 1
    no cdp enable
    ppp authentication chap
    ppp chap hostname usename
    ppp chap password 0 123
    ppp multilink




    usa router

    Cisco 1841 (revision 5.0) with 115712K/15360K bytes of memory.
    flash:c1841-entbase-mz.124-7.bin --- Version 12.4(7)

    configuration

    interface BRI0/0/0
    ip address 172.30.1.2 255.255.255.252
    encapsulation ppp
    dialer-group 1
    isdn switch-type basic-ni
    ppp authentication chap
    ppp chap hostname user
    ppp chap password 0 123

    sh log

    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt: Sending from
    L2
    dest_id = 0, source_id = 522, prim = 241
    priv_ln = 4, int_id = 1663282052
    datastart = E750D428, netstart = E750D438, datasize = 24
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E750D428), size (24)
    *Jun 14 11:59:44 IDT: 6323AB840000020A0241044200010920
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921d: srl_send_l2_pak:
    source_id = Q.921 0x0000, dest_id = Q.931 0x0000, prim =
    DL_DATA_IND 0x0241
    priv_len = 4 int_id = 0x6323AB84 datasize = 24
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921d: data =
    *Jun 14 11:59:44 IDT: 6323AB84000000000241044200010920
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3IF_rx_L2_pak: received data
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendprimPkt:
    source_id (0x20A), state (0x7), dest_id (0x200), event (0x140),

    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_p (0x1), pkt
    (0x63906E8C), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt:
    source_id (0x20A), state (0x7),
    dest_id (0x200), event (0x140),
    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_pkt (0x1),
    pkt (0x634F3CA0), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E750D438), size (4)
    *Jun 14 11:59:44 IDT: 0287013A
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt: Sending from
    L2
    dest_id = 0, source_id = 522, prim = 140
    priv_ln = 4, int_id = 1663282052
    datastart = E750D428, netstart = E750D438, datasize = 20
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E750D428), size (20)
    *Jun 14 11:59:44 IDT: 6323AB840000020A0140044200010920
    *Jun 14 11:59:44 IDT: 0287013A
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_l2d_srq_process: QUEUE_EVENT
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: handle_l2d_srq_mail:
    received:
    dest_id = 0, source_id = 522, prim = 140
    priv_ln = 4, int_id = 1663282052, datasize = 4
    line_status[0] = IF_ACTIVE
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921f: User TX ->
    *Jun 14 11:59:44 IDT: 0287013A
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921: User TX -> RR sapi=0 tei=67
    nr=29
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_l2d_srq_process: event_count 1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: source 0x020A, event
    0x005A, call id 0x int id 0x0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: event 0x5A cr_len 1
    cr 129
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: call_id 0x47B0 cr 0x81
    state 8 event 0x5A ces 1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_ProcessEvent: callref =
    0x0081 RELEASE_COMP:Ux_ReleaseComp(nlcb)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_state_change: callref
    0x0081 old CONNECT_REQUEST, new NULL_STATE
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 CC: CCBRI_Go: source id 0x300, state
    8, call id 0x47B0, event 0x341
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 CC: Decoded CC event 0x61C4AD70
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 CC: CCBRI_Go: call id 0x47B0 call
    ref 0x81 state 5 event 0x99 Src->L3
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 TGRM: get_tgrm_avail_state: idb
    0x6323AB84 bchan 1 service_state 0 call_state 0 false busy 0x0 dsl 0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 TGRM: update_tgrm_call_status: idb
    0x6323AB84 bchan 1 availability state 1 call state(prev,new) (2,0), dsl
    0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 TGRM: update_tgrm_call_status:
    Calling TGRM with tgrm_call_isdn_update: idb 0x6323AB84 bchan 1 call
    state 0 call type 0 call dir 1
    *Jun 14 11:59:44 IDT: ISDN EVENTd: cc_clear_free_list freeing
    0x6390C84C
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENT: process_rxstate: ces/callid
    1/0x47B0 calltype 1 HOST_DISCONNECT_ACK
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: process_rxstate:
    *Jun 14 11:59:44 IDT: 06000147B004080280D1080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: process_rxstate: cause=0x51
    (81), cause_present=1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: calltrkr_call_cleared:
    isdn_info=0x6323BE80, call_id=0x47B0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: calltrkr_call_cleared:
    isdn_info=0x6323F160, call_id=0x47B0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: calltrkr_call_cleared:
    isdn_info=0x6323F160, call_id=0x47B0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: calltrkr_call_cleared:
    isdn_info=0x6323BE80, call_id=0x47B0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: host_disconnect_ack: call
    type is DATA
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 EVENTd: isdn_report: callid 0x47B0
    *Jun 14 11:59:44 IDT: %LINK-3-UPDOWN: Interface BRI0/0/0:1, changed
    state to down
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_from_driver_process:
    QUEUE_EVENT
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921f: User RX <-
    *Jun 14 11:59:44 IDT: 02873A380801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921: User RX <- INFO sapi=0 tei=67,
    ns=29 nr=28
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931: RELEASE_COMP pd = 8 callref =
    0x01
    Cause i = 0x82D1 - Invalid call reference value
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921d: process_rxdata: Frame sent to
    L2
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt:
    source_id (0x200), state (0x0),
    dest_id (0x20A), event (0x141),
    sapi (0x0), ces (0x0), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_pkt (0x1),
    pkt (0x6365AEA0), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E7540BD4), size (12)
    *Jun 14 11:59:44 IDT: 02873A380801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt: Sending from
    L2
    dest_id = 0, source_id = 512, prim = 141
    priv_ln = 4, int_id = 1663282052
    datastart = E7540BC4, netstart = E7540BD4, datasize = 28
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E7540BC4), size (28)
    *Jun 14 11:59:44 IDT: 6323AB84000002000141040000000900
    *Jun 14 11:59:44 IDT: 02873A380801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_from_driver_process:
    event_count 1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: handle_mail: received:
    dest_id = 0, source_id = 512, prim = 141
    priv_ln = 4, int_id = 1663282052, datasize = 28
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E7540BD4), size (28)
    *Jun 14 11:59:44 IDT: 02873A380801015A080282D1AE893401
    *Jun 14 11:59:44 IDT: 406C0200C37008C135323530
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: handle_mail: received data =

    *Jun 14 11:59:44 IDT: 02873A380801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendprimPkt:
    source_id (0x20A), state (0x7), dest_id (0x300), event (0x241),

    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_p (0x1), pkt
    (0x62DEFA3C), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt:
    source_id (0x20A), state (0x7),
    dest_id (0x300), event (0x241),
    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_pkt (0x1),
    pkt (0x62FAF694), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E7100858), size (8)
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt: Sending from
    L2
    dest_id = 0, source_id = 522, prim = 241
    priv_ln = 4, int_id = 1663282052
    datastart = E7100848, netstart = E7100858, datasize = 24
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E7100848), size (24)
    *Jun 14 11:59:44 IDT: 6323AB840000020A0241040F00010906
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921d: srl_send_l2_pak:
    source_id = Q.921 0x0000, dest_id = Q.931 0x0000, prim =
    DL_DATA_IND 0x0241
    priv_len = 4 int_id = 0x6323AB84 datasize = 24
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921d: data =
    *Jun 14 11:59:44 IDT: 6323AB84000000000241040F00010906
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3IF_rx_L2_pak: received data
    *Jun 14 11:59:44 IDT: 0801015A080282D1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendprimPkt:
    source_id (0x20A), state (0x7), dest_id (0x200), event (0x140),

    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_p (0x1), pkt
    (0x63646ADC), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt:
    source_id (0x20A), state (0x7),
    dest_id (0x200), event (0x140),
    sapi (0x0), ces (0x1), call_id (0x0),
    chan_id (0x0), int_id (0x6323AB84), free_pkt (0x1),
    pkt (0x634F5F78), msecs (0x0), priority (0xA)
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E750E0B8), size (4)
    *Jun 14 11:59:44 IDT: 0287013C
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_SendPkt: Sending from
    L2
    dest_id = 0, source_id = 522, prim = 140
    priv_ln = 4, int_id = 1663282052
    datastart = E750E0A8, netstart = E750E0B8, datasize = 20
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: L2IF_DispPak: packet -
    start(E750E0A8), size (20)
    *Jun 14 11:59:44 IDT: 6323AB840000020A0140043800010920
    *Jun 14 11:59:44 IDT: 0287013C
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_l2d_srq_process: QUEUE_EVENT
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 PACKET: handle_l2d_srq_mail:
    received:
    dest_id = 0, source_id = 522, prim = 140
    priv_ln = 4, int_id = 1663282052, datasize = 4
    line_status[0] = IF_ACTIVE
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921f: User TX ->
    *Jun 14 11:59:44 IDT: 0287013C
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q921: User TX -> RR sapi=0 tei=67
    nr=30
    *Jun 14 11:59:44 IDT: ISDN Q921d: isdn_l2d_srq_process: event_count 1
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: source 0x020A, event
    0x005A, call id 0x int id 0x0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: event 0x5A cr_len 1
    cr 129
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 SERROR: L3_GetUser_NLCB: EVENT 0X5A
    No NLCB 2
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 **ERROR**: L3_BadPeerMsg: event 0x5A
    cr 0x81 callid 0x0
    *Jun 14 11:59:44 IDT: ISDN BR0/0/0 Q931d: L3_Go: L3_GetUser_NLCB
    returned NULL cid 0x0 cr 0x81 ev 0x5A ces 1 -- Message ignored
    , Jun 14, 2006
    #1
    1. Advertising

  2. To resolve speed mismatch issues, configure the call for 56K using one
    of these methods.

    For dialer profiles:

    maui-soho-01(config)#interface Dialer1
    maui-soho-01(config-if)#dialer string 81560 class 56k
    !---Dial 81560 and use the map-class named 56K (defined below).
    maui-soho-01(config-if)#exit
    maui-soho-01(config)#map-class dialer 56k
    !---The map-class named 56K that was used with the dialer string is int
    Dialer1.
    maui-soho-01(config-map-clas)#dialer isdn speed 56
    !---Set the speed of the call to 56K (default is 64k).

    Configuring and Troubleshooting Dialer Profiles

    http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094e6c.shtml

    -----------------------------------------------------------------------------------

    For Legacy Dial-on-Demand Routing (DDR) (dialer maps):

    maui-soho-01(config)#interface bri 0
    maui-soho-01(config-if)#dialer map ip 10.1.1.1 name maui-nas-08 speed
    56 81560
    !---The keyword speed 56 sets the outgoing call rate at 56K.

    Cisco IOS Dial Technologies Command Reference - Commands D

    http://www.cisco.com/en/US/products...ommand_reference_chapter09186a008010afff.html

    Hope this helps.

    Brad Reese
    BradReese.Com - Cisco Network Engineer Directory
    http://www.bradreese.com/network-engineer-directory.htm
    1293 Hendersonville Road, Suite 17
    Asheville, North Carolina USA 28803
    USA & Canada: 877-549-2680
    International: 828-277-7272
    Fax: 775-254-3558
    AIM: R2MGrant
    Website: http://www.bradreese.com/contact-us.htm
    www.BradReese.Com, Jun 14, 2006
    #2
    1. Advertising

  3. Guest

    Configure the ISDN SPID1 & ISDN SPID2 commands with LDN on the USA
    router and try.

    Rgds,

    www.BradReese.Com wrote:
    > To resolve speed mismatch issues, configure the call for 56K using one
    > of these methods.
    >
    > For dialer profiles:
    >
    > maui-soho-01(config)#interface Dialer1
    > maui-soho-01(config-if)#dialer string 81560 class 56k
    > !---Dial 81560 and use the map-class named 56K (defined below).
    > maui-soho-01(config-if)#exit
    > maui-soho-01(config)#map-class dialer 56k
    > !---The map-class named 56K that was used with the dialer string is int
    > Dialer1.
    > maui-soho-01(config-map-clas)#dialer isdn speed 56
    > !---Set the speed of the call to 56K (default is 64k).
    >
    > Configuring and Troubleshooting Dialer Profiles
    >
    > http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094e6c.shtml
    >
    > -----------------------------------------------------------------------------------
    >
    > For Legacy Dial-on-Demand Routing (DDR) (dialer maps):
    >
    > maui-soho-01(config)#interface bri 0
    > maui-soho-01(config-if)#dialer map ip 10.1.1.1 name maui-nas-08 speed
    > 56 81560
    > !---The keyword speed 56 sets the outgoing call rate at 56K.
    >
    > Cisco IOS Dial Technologies Command Reference - Commands D
    >
    > http://www.cisco.com/en/US/products...ommand_reference_chapter09186a008010afff.html
    >
    > Hope this helps.
    >
    > Brad Reese
    > BradReese.Com - Cisco Network Engineer Directory
    > http://www.bradreese.com/network-engineer-directory.htm
    > 1293 Hendersonville Road, Suite 17
    > Asheville, North Carolina USA 28803
    > USA & Canada: 877-549-2680
    > International: 828-277-7272
    > Fax: 775-254-3558
    > AIM: R2MGrant
    > Website: http://www.bradreese.com/contact-us.htm
    , Jun 14, 2006
    #3
  4. Guest

    thanks guys
    it's working

    wrote:
    > Configure the ISDN SPID1 & ISDN SPID2 commands with LDN on the USA
    > router and try.
    >
    > Rgds,
    >
    > www.BradReese.Com wrote:
    > > To resolve speed mismatch issues, configure the call for 56K using one
    > > of these methods.
    > >
    > > For dialer profiles:
    > >
    > > maui-soho-01(config)#interface Dialer1
    > > maui-soho-01(config-if)#dialer string 81560 class 56k
    > > !---Dial 81560 and use the map-class named 56K (defined below).
    > > maui-soho-01(config-if)#exit
    > > maui-soho-01(config)#map-class dialer 56k
    > > !---The map-class named 56K that was used with the dialer string is int
    > > Dialer1.
    > > maui-soho-01(config-map-clas)#dialer isdn speed 56
    > > !---Set the speed of the call to 56K (default is 64k).
    > >
    > > Configuring and Troubleshooting Dialer Profiles
    > >
    > > http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094e6c.shtml
    > >
    > > -----------------------------------------------------------------------------------
    > >
    > > For Legacy Dial-on-Demand Routing (DDR) (dialer maps):
    > >
    > > maui-soho-01(config)#interface bri 0
    > > maui-soho-01(config-if)#dialer map ip 10.1.1.1 name maui-nas-08 speed
    > > 56 81560
    > > !---The keyword speed 56 sets the outgoing call rate at 56K.
    > >
    > > Cisco IOS Dial Technologies Command Reference - Commands D
    > >
    > > http://www.cisco.com/en/US/products...ommand_reference_chapter09186a008010afff.html
    > >
    > > Hope this helps.
    > >
    > > Brad Reese
    > > BradReese.Com - Cisco Network Engineer Directory
    > > http://www.bradreese.com/network-engineer-directory.htm
    > > 1293 Hendersonville Road, Suite 17
    > > Asheville, North Carolina USA 28803
    > > USA & Canada: 877-549-2680
    > > International: 828-277-7272
    > > Fax: 775-254-3558
    > > AIM: R2MGrant
    > > Website: http://www.bradreese.com/contact-us.htm
    , Jun 15, 2006
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. BobCov
    Replies:
    3
    Views:
    565
    Andre Beck
    Nov 21, 2003
  2. SkY
    Replies:
    0
    Views:
    926
  3. Martin Maurer
    Replies:
    5
    Views:
    14,438
    moc.hooha
    Nov 7, 2008
  4. sync
    Replies:
    0
    Views:
    542
  5. BE749309
    Replies:
    0
    Views:
    1,176
    BE749309
    Jun 9, 2010
Loading...

Share This Page