CISCO IOS Router DHCP

Discussion in 'Cisco' started by =?ISO-8859-2?Q?Tomislav_Par=E8ina?=, Apr 5, 2005.

  1. 1. I hav estarted DHCP debug command. This is outcome:
    Writing dhcp_router
    Feb 5 16:47:06.647: %DHCPD-3-WRITE_ERROR: DHCP could not write bindings
    to ftp://dhcp:dhcp@192.168.0.11/dhcp_router.
    Why do I recive this mesage? FTP is on and running!

    2. How to put in a pool a subnetwork 192.168.0.128 /25? I have tryed
    with command "network 192.168.0.128 /25" but then no computer in network
    recives IP address. If I put command "network 192.168.0.0 /24" then it
    starts giving IP address from 1.
    Must I put in the pool whole network (network 192.168.0.0 /24) and then
    exclude address from 1-127? I would like to do it with subnetworks.

    Thanks!


    --
    Tomislav Parcina
    =?ISO-8859-2?Q?Tomislav_Par=E8ina?=, Apr 5, 2005
    #1
    1. Advertising

  2. =?ISO-8859-2?Q?Tomislav_Par=E8ina?=

    Gee Guest

    Hi,

    Start the DHCP service by
    config# service dhcp
    ip dhcp pool 1
    network 192.168.0.128 255.255.255.252


    ps. What is the status of your ethernet interface ?


    regards, Glenn

    Tomislav Parcina wrote:
    > 1. I hav estarted DHCP debug command. This is outcome:
    > Writing dhcp_router
    > Feb 5 16:47:06.647: %DHCPD-3-WRITE_ERROR: DHCP could not write

    bindings
    > to ftp://dhcp:dhcp@192.168.0.11/dhcp_router.
    > Why do I recive this mesage? FTP is on and running!
    >
    > 2. How to put in a pool a subnetwork 192.168.0.128 /25? I have tryed
    > with command "network 192.168.0.128 /25" but then no computer in

    network
    > recives IP address. If I put command "network 192.168.0.0 /24" then

    it
    > starts giving IP address from 1.
    > Must I put in the pool whole network (network 192.168.0.0 /24) and

    then
    > exclude address from 1-127? I would like to do it with subnetworks.
    >
    > Thanks!
    >
    >
    > --
    > Tomislav Parcina
    >
    Gee, Apr 7, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Ed Kideys, Tech-Train
    Replies:
    3
    Views:
    4,600
    Wence Van der Meersch
    Apr 30, 2004
  2. Mr Corbett
    Replies:
    5
    Views:
    3,172
    Aaron Leonard
    Aug 19, 2005
  3. indydano
    Replies:
    1
    Views:
    1,166
    Phillip Remaker
    Nov 26, 2005
  4. Mike Rahl
    Replies:
    1
    Views:
    1,227
    Trendkill
    May 30, 2007
  5. Sylvain Robitaille
    Replies:
    0
    Views:
    670
    Sylvain Robitaille
    Oct 31, 2008
Loading...

Share This Page