Cisco IOS 12.3(15) IP plus

Discussion in 'Cisco' started by dilan.weerasinghe@gmail.com, Aug 25, 2006.

  1. Guest

    Hi

    How can I tell if IP plus is installed on a Cisco 2610 router running
    IOS 12.3(15)?

    Output of show ver is below -

    Cisco Internetwork Operating System Software

    IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    SOFTWARE (f

    c3)
    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 1986-2005 by cisco Systems, Inc.

    Compiled Tue 24-May-05 14:02 by ssearch

    Image text-base: 0x80008098, data-base: 0x81A13050


    ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

    ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    SOFTWARE (fc3)


    Router uptime is 9 minutes
    System returned to ROM by power-on
    System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"


    cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
    of memory
    ..
    Processor board ID JAD054005ZJ (1988650851)
    M860 processor: part number 0, mask 49
    Bridging software.
    X.25 software, Version 3.0.0.
    1 Ethernet/IEEE 802.3 interface(s)
    1 Serial network interface(s)
    32K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    Thanks
    Dilan
     
    , Aug 25, 2006
    #1
    1. Advertising

  2. Jon G Guest

    Hi Dilan,
    You can tell the feature set of your router based on the letters in
    the .bin file. Your IOS is "flash:c2600-ik9o3s3-mz.123-15.bin" the
    ik9o3s3-mz is your feature set. This feature set is IP/FW/IDS PLUS
    IPSEC 3DES BASIC. This is more enhanced then the IP/PLUS feautre set.
    If you have a CCO account with cisco, there are tools to
    compare/contrast the individual features of each IOS.

    Thanks,
    Jon


    wrote:
    > Hi
    >
    > How can I tell if IP plus is installed on a Cisco 2610 router running
    > IOS 12.3(15)?
    >
    > Output of show ver is below -
    >
    > Cisco Internetwork Operating System Software
    >
    > IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > SOFTWARE (f
    >
    > c3)
    > Technical Support: http://www.cisco.com/techsupport
    >
    > Copyright (c) 1986-2005 by cisco Systems, Inc.
    >
    > Compiled Tue 24-May-05 14:02 by ssearch
    >
    > Image text-base: 0x80008098, data-base: 0x81A13050
    >
    >
    > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >
    > ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > SOFTWARE (fc3)
    >
    >
    > Router uptime is 9 minutes
    > System returned to ROM by power-on
    > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"
    >
    >
    > cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
    > of memory
    > .
    > Processor board ID JAD054005ZJ (1988650851)
    > M860 processor: part number 0, mask 49
    > Bridging software.
    > X.25 software, Version 3.0.0.
    > 1 Ethernet/IEEE 802.3 interface(s)
    > 1 Serial network interface(s)
    > 32K bytes of non-volatile configuration memory.
    > 16384K bytes of processor board System flash (Read/Write)
    >
    > Configuration register is 0x2102
    >
    > Thanks
    > Dilan
     
    Jon G, Aug 25, 2006
    #2
    1. Advertising

  3. mcaissie Guest

    The info is in the filename
    > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"


    c2600-ik9o3s3-mz is for IP/FW/IDS IPSEC 3DES BASIC



    This may help

    http://articles.techrepublic.com.com/5102-1035-6078554.html


    <> wrote in message
    news:...
    > Hi
    >
    > How can I tell if IP plus is installed on a Cisco 2610 router running
    > IOS 12.3(15)?
    >
    > Output of show ver is below -
    >
    > Cisco Internetwork Operating System Software
    >
    > IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > SOFTWARE (f
    >
    > c3)
    > Technical Support: http://www.cisco.com/techsupport
    >
    > Copyright (c) 1986-2005 by cisco Systems, Inc.
    >
    > Compiled Tue 24-May-05 14:02 by ssearch
    >
    > Image text-base: 0x80008098, data-base: 0x81A13050
    >
    >
    > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    >
    > ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > SOFTWARE (fc3)
    >
    >
    > Router uptime is 9 minutes
    > System returned to ROM by power-on
    > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"
    >
    >
    > cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
    > of memory
    > .
    > Processor board ID JAD054005ZJ (1988650851)
    > M860 processor: part number 0, mask 49
    > Bridging software.
    > X.25 software, Version 3.0.0.
    > 1 Ethernet/IEEE 802.3 interface(s)
    > 1 Serial network interface(s)
    > 32K bytes of non-volatile configuration memory.
    > 16384K bytes of processor board System flash (Read/Write)
    >
    > Configuration register is 0x2102
    >
    > Thanks
    > Dilan
    >
     
    mcaissie, Aug 25, 2006
    #3
  4. Guest

    mcaissie wrote:
    > <> wrote in message
    > news:...
    > > Hi
    > >
    > > How can I tell if IP plus is installed on a Cisco 2610 router running
    > > IOS 12.3(15)?
    > >
    > > Output of show ver is below -
    > >
    > > Cisco Internetwork Operating System Software
    > >
    > > IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > > SOFTWARE (f
    > >
    > > c3)
    > > Technical Support: http://www.cisco.com/techsupport
    > >
    > > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > >
    > > Compiled Tue 24-May-05 14:02 by ssearch
    > >
    > > Image text-base: 0x80008098, data-base: 0x81A13050
    > >
    > >
    > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    > >
    > > ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > > SOFTWARE (fc3)
    > >
    > >
    > > Router uptime is 9 minutes
    > > System returned to ROM by power-on
    > > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"
    > >
    > >
    > > cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
    > > of memory
    > > .
    > > Processor board ID JAD054005ZJ (1988650851)
    > > M860 processor: part number 0, mask 49
    > > Bridging software.
    > > X.25 software, Version 3.0.0.
    > > 1 Ethernet/IEEE 802.3 interface(s)
    > > 1 Serial network interface(s)
    > > 32K bytes of non-volatile configuration memory.
    > > 16384K bytes of processor board System flash (Read/Write)

    > The info is in the filename
    > > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"

    >
    > c2600-ik9o3s3-mz is for IP/FW/IDS IPSEC 3DES BASIC
    > This may help
    > http://articles.techrepublic.com.com/5102-1035-6078554.html


    That's very nice, thanks.

    One small thing
    c2600-ik9o3s3-mz

    -mz m = Run from RAM
    z = Zip compressed

    Some images run from flash (2500 router, few others IIRC)
    This is important when doing upgrades.
    e.g. How do you upgrade the running image?

    This "unzip" for example uncompresses the image.

    Y:\>unzip -v
    UnZip 5.42 of 14 January 2001, by Info-ZIP. Maintained by C. Spieler.
    Send
    bug reports to the authors at ; see README for
    details.

    Latest sources and executables are at
    ftp://ftp.info-zip.org/pub/infozip/ ;
    see ftp://ftp.info-zip.org/pub/infozip/UnZip.html for other sites.
     
    , Aug 25, 2006
    #4
  5. Guest

    wrote:
    > mcaissie wrote:
    > > <> wrote in message
    > > news:...
    > > > Hi
    > > >
    > > > How can I tell if IP plus is installed on a Cisco 2610 router running
    > > > IOS 12.3(15)?
    > > >
    > > > Output of show ver is below -
    > > >
    > > > Cisco Internetwork Operating System Software
    > > >
    > > > IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > > > SOFTWARE (f
    > > >
    > > > c3)
    > > > Technical Support: http://www.cisco.com/techsupport
    > > >
    > > > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > > >
    > > > Compiled Tue 24-May-05 14:02 by ssearch
    > > >
    > > > Image text-base: 0x80008098, data-base: 0x81A13050
    > > >
    > > >
    > > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
    > > >
    > > > ROM: C2600 Software (C2600-IK9O3S3-M), Version 12.3(15), RELEASE
    > > > SOFTWARE (fc3)
    > > >
    > > >
    > > > Router uptime is 9 minutes
    > > > System returned to ROM by power-on
    > > > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"
    > > >
    > > >
    > > > cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
    > > > of memory
    > > > .
    > > > Processor board ID JAD054005ZJ (1988650851)
    > > > M860 processor: part number 0, mask 49
    > > > Bridging software.
    > > > X.25 software, Version 3.0.0.
    > > > 1 Ethernet/IEEE 802.3 interface(s)
    > > > 1 Serial network interface(s)
    > > > 32K bytes of non-volatile configuration memory.
    > > > 16384K bytes of processor board System flash (Read/Write)

    > > The info is in the filename
    > > > System image file is "flash:c2600-ik9o3s3-mz.123-15.bin"

    > >
    > > c2600-ik9o3s3-mz is for IP/FW/IDS IPSEC 3DES BASIC
    > > This may help
    > > http://articles.techrepublic.com.com/5102-1035-6078554.html

    >
    > That's very nice, thanks.
    >
    > One small thing
    > c2600-ik9o3s3-mz
    >
    > -mz m = Run from RAM
    > z = Zip compressed
    >
    > Some images run from flash (2500 router, few others IIRC)
    > This is important when doing upgrades.
    > e.g. How do you upgrade the running image?
    >
    > This "unzip" for example uncompresses the image.
    >
    > Y:\>unzip -v
    > UnZip 5.42 of 14 January 2001, by Info-ZIP. Maintained by C. Spieler.
    > Send
    > bug reports to the authors at ; see README for
    > details.
    >
    > Latest sources and executables are at
    > ftp://ftp.info-zip.org/pub/infozip/ ;
    > see ftp://ftp.info-zip.org/pub/infozip/UnZip.html for other sites.


    Thanks everyone, appreciate it.
     
    , Aug 25, 2006
    #5
  6. Dom Guest

    Dom, Aug 28, 2006
    #6
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Jon Lawrence

    2500 ip plus ios size

    Jon Lawrence, Aug 1, 2004, in forum: Cisco
    Replies:
    8
    Views:
    646
    M.C. van den Bovenkamp
    Aug 6, 2004
  2. phillip
    Replies:
    4
    Views:
    5,451
    Glen Grant
    Nov 14, 2004
  3. Helmut Wollmersdorfer

    IOS newbie: 1 plus 8 external IPs

    Helmut Wollmersdorfer, Dec 30, 2004, in forum: Cisco
    Replies:
    1
    Views:
    381
  4. Jakub K
    Replies:
    1
    Views:
    509
    =?ISO-8859-2?Q?Micha=B3_Iwaszko?=
    Jan 4, 2006
  5. Mike Rahl
    Replies:
    1
    Views:
    1,256
    Trendkill
    May 30, 2007
Loading...

Share This Page