Cisco Catalyst 4006

Discussion in 'Hardware' started by armopop, Nov 3, 2008.

  1. armopop

    armopop

    Joined:
    Nov 3, 2008
    Messages:
    1
    Hello there;
    I have a catalyst 4006 switch with administrator and layer3 switching module. I have couple of vlans configured and running fine. I also have two firewalls for internet access, one of them is a PIX 515 and the other is a MS ISA 2004 server.
    Here i will describe my configuration

    Vlan 10---->192.168.10.0/24
    Vlan 100--->192.168.100.0/24
    Vlan 200---->192.18.200.0/24

    PIX--->192.168.1.1
    ISA--->192.168.100.1

    How can i force everyone on vlan 10 to go through the PIX firewall for internet access, meanwhile every one on vlans 100 and 200 through the ISA server.
    I know that i need to use route-map command, but how? A small example would be much appreciated.
    armopop, Nov 3, 2008
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Rob
    Replies:
    1
    Views:
    574
    chris@nospam.com
    Dec 16, 2003
  2. Catalyst_user

    TFTP from a Cisco Catalyst 4006 problem

    Catalyst_user, Mar 17, 2005, in forum: Cisco
    Replies:
    5
    Views:
    761
    Hansang Bae
    Mar 22, 2005
  3. AM
    Replies:
    2
    Views:
    2,975
    Doug McIntyre
    Jul 4, 2006
  4. John Strow
    Replies:
    2
    Views:
    2,799
    John Strow
    Jun 14, 2007
  5. Chad Mahoney

    Cisco Catalyst 4006

    Chad Mahoney, Aug 21, 2007, in forum: Cisco
    Replies:
    2
    Views:
    878
    Chad Mahoney
    Aug 21, 2007
Loading...

Share This Page