Cisco ATA 186 CallerID

Discussion in 'UK VOIP' started by TheBoy, May 13, 2005.

  1. TheBoy

    TheBoy Guest

    Does anyone know what needs to be put in the CallerIDMethod for the Cisco
    ATA to output CLID in UK format?
     
    TheBoy, May 13, 2005
    #1
    1. Advertising

  2. TheBoy

    Ivor Jones Guest

    TheBoy wrote:
    > Does anyone know what needs to be put in the CallerIDMethod for the
    > Cisco ATA to output CLID in UK format?


    What options have you got..?

    Ivor
     
    Ivor Jones, May 13, 2005
    #2
    1. Advertising

  3. TheBoy

    TheBoy Guest

    "Ivor Jones" <> wrote in message
    news:...
    > TheBoy wrote:
    >> Does anyone know what needs to be put in the CallerIDMethod for the
    >> Cisco ATA to output CLID in UK format?

    >
    > What options have you got..?
    >
    > Ivor
    >


    From the manual:

    CallerID/DTMFMethod. Possible values are:

    bit 0-1 (mask 0x3): method;
    0=Bellcore, 1=DTMF, 2=ETSI, 3=FSK

    bit 2 (mask 0x4): method type;
    0=type1
    1=type 2

    if(method=0) {
    bit 3-8 (mask 0x1f8): max no. of digits
    bit 9-14 (mask 0x7e00): max no. of chars
    bit 15-20 (mask 0x1f8000): special chars
    }
    else {
    bit 3-6 (mask 0x78): start digit
    bit 7-10 (mask 0x780): end digit
    bit 11 (mask 0x800): polarity reversal
    bit 12-16 (mask 0x1f000): max no. of digits
    }

    - Sweden=0x0ff61

    - Denmark=0x0fde1

    - USA=0x19e60
     
    TheBoy, May 13, 2005
    #3
  4. TheBoy

    duck Guest

    TheBoy wrote:
    > Does anyone know what needs to be put in the CallerIDMethod for the Cisco
    > ATA to output CLID in UK format?


    The ATA 186 doesn't support UK CID Format.
     
    duck, May 14, 2005
    #4
  5. TheBoy

    TheBoy Guest

    "duck" <> wrote in message
    news:7qthe.32081$...
    > TheBoy wrote:
    >> Does anyone know what needs to be put in the CallerIDMethod for the Cisco
    >> ATA to output CLID in UK format?

    >
    > The ATA 186 doesn't support UK CID Format.


    Thats annoying. You expect a premier product like Cisco to support UK
    standards. Its not as if its a micky mouse far east brand :( - especially as
    its running latest V3.2 firmware.
     
    TheBoy, May 15, 2005
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. cyrus
    Replies:
    0
    Views:
    924
    cyrus
    Nov 24, 2003
  2. Replies:
    0
    Views:
    484
  3. Replies:
    0
    Views:
    455
  4. Sam Wong
    Replies:
    3
    Views:
    1,018
    Sam Wong
    Jan 5, 2004
  5. SoGo
    Replies:
    1
    Views:
    633
    BlueRinse
    Mar 12, 2005
Loading...

Share This Page