Cisco 870 Dialer issue

Discussion in 'Cisco' started by nedtrilby@googlemail.com, Jun 6, 2012.

  1. Guest

    Hi,

    I have a HQ site able to bring up a Dialer connection to a remote site
    (Site-BB). It also works in reverse i.e. Site-BB can make the
    connection into HQ. Now I have a requirement to get a 3rd site
    connecting into Site-BB.But when I create a new Dialer interface the
    original connection won't come up.
    Here are the details:
    !
    hostname Site-BB
    !
    ip cef
    no ip bootp server
    ip name-server 192.168.1.105
    !
    !
    isdn switch-type basic-net3
    !
    !
    username SIte-HQ password xxxxxxxxxx
    !
    !
    interface BRI0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    encapsulation ppp
    dialer pool-member 2
    isdn switch-type basic-net3
    isdn point-to-point-setup
    !
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    no atm ilmi-keepalive
    !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface Vlan1
    description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
    ip address 192.168.4.250 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    !
    interface Dialer0
    no ip address
    !
    interface Dialer1
    no ip address
    encapsulation ppp
    dialer pool 1
    dialer idle-timeout 20
    dialer string 0191730044
    dialer string 0191730066
    dialer-group 1
    no cdp enable
    ppp authentication chap pap callin
    ppp chap hostname Site-BB
    ppp chap password xxxxxxxxx
    ppp pap sent-username Site-BB password xxxxxxx
    !
    interface Dialer3
    ip address 10.0.4.1 255.255.255.0
    encapsulation ppp
    dialer pool 2
    dialer string 0191730044
    dialer string 0191730066
    dialer-group 2
    no cdp enable
    ppp authentication chap pap callin
    ppp chap hostname Site-BB
    ppp chap password xxxxx
    ppp pap sent-username Site-BB password xxxxxxxxxx
    !
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer3
    ip route 192.168.1.1 255.255.255.255 192.168.4.254
    ip route 192.168.1.4 255.255.255.255 192.168.4.254
    ip route 192.168.1.5 255.255.255.255 192.168.4.254
    ip route 192.168.1.6 255.255.255.255 192.168.4.254
    ip route 192.168.1.105 255.255.255.255 Dialer3
    ip route 192.168.1.151 255.255.255.255 192.168.4.254
    ip route 192.168.1.153 255.255.255.255 192.168.4.254
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    !
    ip nat inside source list 1 interface Dialer0 overload
    ip nat outside source static network 192.168.1.105 192.168.4.250 /32
    !
    ip access-list extended OutSIte-HQ
    remark out to SIte-HQ
    remark SDM_ACL Category=1
    remark out to HQ
    permit ip 192.168.4.0 0.0.0.255 10.0.4.0 0.0.0.255
    ip access-list extended inboundSIte-HQ
    remark inboundSIte-HQ
    remark SDM_ACL Category=1
    permit ip 10.0.4.0 0.0.0.255 192.168.4.0 0.0.0.255
    !
    logging trap debugging
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark SDM_ACL Category=3
    access-list 1 permit 192.168.4.0 0.0.0.255
    dialer-list 1 protocol ip permit
    dialer-list 2 protocol ip permit
    no cdp run
    !
    !
    control-plane
    !
    banner login ^CCCCCCCCCCCCCCCCCAuthorized access only!
    no inservice
    !
    end
    ______________
    So above works fine both ways; when I add the new details below for
    the new site - it stops working
    !
    username Site-BB password xxx
    !
    interface BRI0
    dialer pool-member 3
    ! (now BRI0 has pool-member 2 and 3)
    !
    !
    interface Dialer99
    description ISDN_to_New-site
    ip address 192.168.99.74 255.255.255.0
    encapsulation ppp
    dialer pool 3
    dialer string 0167115500
    dialer-group 2
    pulse-time 0
    ppp authentication chap pap callin
    ppp chap hostname Site-BB
    ppp chap password 0 xxx
    ppp pap sent-username Site-BB password 0xxx
    !
    !
    ip route 192.168.200.0 255.255.255.0 dialer99
    !___________________________________

    Obviously I now need to be able to have ISDN access Site-BB from both
    HQ-Site and New-site. Any help appreciated. Thanks
     
    , Jun 6, 2012
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Arjan
    Replies:
    0
    Views:
    672
    Arjan
    Apr 2, 2004
  2. John
    Replies:
    0
    Views:
    628
  3. John
    Replies:
    0
    Views:
    706
  4. AM
    Replies:
    0
    Views:
    426
  5. Dan Lanciani
    Replies:
    0
    Views:
    1,072
    Dan Lanciani
    Jul 28, 2008
Loading...

Share This Page