Cisco 806 IOS and SSH / IPSEC compatibility

Discussion in 'Cisco' started by Brad B., Jul 9, 2003.

  1. Brad B.

    Brad B. Guest

    I recently purchased a Cisco 806 router and am attempting to configure
    both vpn tunneling and SSH. When I try to enter the "crypto" command
    or "ip ssh" command, they are not valid. I am fairly certain that I
    have the IOS which supports IPSEC 3DES which should in turn support
    SSH functionality. Posted is my "show version":

    00:27:53: %SYS-5-CONFIG_I: Configured from console by console
    Cisco Internetwork Operating System Software
    IOS (tm) C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY
    DEPLOYMENT RELEA
    SE SOFTWARE (fc1)
    Synched to technology version 12.2(7.1)T
    TAC Support: http://www.cisco.com/tac
    Copyright (c) 1986-2002 by cisco Systems, Inc.
    Compiled Thu 23-May-02 22:34 by ealyon
    Image text-base: 0x80013170, data-base: 0x807432E4

    ROM: System Bootstrap, Version 12.2(4r)XM3, RELEASE SOFTWARE (fc1)
    ROM: C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY DEPLOYMENT
    RELEASE S
    OFTWARE (fc1)

    cyclops uptime is 27 minutes
    System returned to ROM by reload
    System image file is "flash:c806-o3sy6-mz.122-4.YH.bin"

    CISCO C806 (MPC855T) processor (revision 0x501) with 30720K/2048K
    bytes of memor
    y.
    Processor board ID FOC07010F5R (3319105503), with hardware revision
    0000
    CPU rev number 0
    Bridging software.
    2 Ethernet/IEEE 802.3 interface(s)
    128K bytes of non-volatile configuration memory.
    8192K bytes of processor board System flash (Read/Write)
    2048K bytes of processor board Web flash (Read/Write)

    Configuration register is 0x2102


    Any help on this issue would be greatly appreciated.

    -Brad
    Brad B., Jul 9, 2003
    #1
    1. Advertising

  2. No, your router doesn't have a crypto image. You need to have a
    c806-k9o3sy6-mz image. -k9- stands for 3DES image and -k8- stands for DES.

    Ravikumar

    "Brad B." wrote:

    > I recently purchased a Cisco 806 router and am attempting to configure
    > both vpn tunneling and SSH. When I try to enter the "crypto" command
    > or "ip ssh" command, they are not valid. I am fairly certain that I
    > have the IOS which supports IPSEC 3DES which should in turn support
    > SSH functionality. Posted is my "show version":
    >
    > 00:27:53: %SYS-5-CONFIG_I: Configured from console by console
    > Cisco Internetwork Operating System Software
    > IOS (tm) C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY
    > DEPLOYMENT RELEA
    > SE SOFTWARE (fc1)
    > Synched to technology version 12.2(7.1)T
    > TAC Support: http://www.cisco.com/tac
    > Copyright (c) 1986-2002 by cisco Systems, Inc.
    > Compiled Thu 23-May-02 22:34 by ealyon
    > Image text-base: 0x80013170, data-base: 0x807432E4
    >
    > ROM: System Bootstrap, Version 12.2(4r)XM3, RELEASE SOFTWARE (fc1)
    > ROM: C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY DEPLOYMENT
    > RELEASE S
    > OFTWARE (fc1)
    >
    > cyclops uptime is 27 minutes
    > System returned to ROM by reload
    > System image file is "flash:c806-o3sy6-mz.122-4.YH.bin"
    >
    > CISCO C806 (MPC855T) processor (revision 0x501) with 30720K/2048K
    > bytes of memor
    > y.
    > Processor board ID FOC07010F5R (3319105503), with hardware revision
    > 0000
    > CPU rev number 0
    > Bridging software.
    > 2 Ethernet/IEEE 802.3 interface(s)
    > 128K bytes of non-volatile configuration memory.
    > 8192K bytes of processor board System flash (Read/Write)
    > 2048K bytes of processor board Web flash (Read/Write)
    >
    > Configuration register is 0x2102
    >
    > Any help on this issue would be greatly appreciated.
    >
    > -Brad
    Ravikumar Eswaran, Jul 9, 2003
    #2
    1. Advertising

  3. Brad B.

    Brad B. Guest

    I went ahead and upgraded to the k9 image and now have full 3DES and
    ssh functionality. Thank you.

    Ravikumar Eswaran <> wrote in message news:<>...
    > No, your router doesn't have a crypto image. You need to have a
    > c806-k9o3sy6-mz image. -k9- stands for 3DES image and -k8- stands for DES.
    >
    > Ravikumar
    >
    > "Brad B." wrote:
    >
    > > I recently purchased a Cisco 806 router and am attempting to configure
    > > both vpn tunneling and SSH. When I try to enter the "crypto" command
    > > or "ip ssh" command, they are not valid. I am fairly certain that I
    > > have the IOS which supports IPSEC 3DES which should in turn support
    > > SSH functionality. Posted is my "show version":
    > >
    > > 00:27:53: %SYS-5-CONFIG_I: Configured from console by console
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY
    > > DEPLOYMENT RELEA
    > > SE SOFTWARE (fc1)
    > > Synched to technology version 12.2(7.1)T
    > > TAC Support: http://www.cisco.com/tac
    > > Copyright (c) 1986-2002 by cisco Systems, Inc.
    > > Compiled Thu 23-May-02 22:34 by ealyon
    > > Image text-base: 0x80013170, data-base: 0x807432E4
    > >
    > > ROM: System Bootstrap, Version 12.2(4r)XM3, RELEASE SOFTWARE (fc1)
    > > ROM: C806 Software (C806-O3SY6-M), Version 12.2(4)YH, EARLY DEPLOYMENT
    > > RELEASE S
    > > OFTWARE (fc1)
    > >
    > > cyclops uptime is 27 minutes
    > > System returned to ROM by reload
    > > System image file is "flash:c806-o3sy6-mz.122-4.YH.bin"
    > >
    > > CISCO C806 (MPC855T) processor (revision 0x501) with 30720K/2048K
    > > bytes of memor
    > > y.
    > > Processor board ID FOC07010F5R (3319105503), with hardware revision
    > > 0000
    > > CPU rev number 0
    > > Bridging software.
    > > 2 Ethernet/IEEE 802.3 interface(s)
    > > 128K bytes of non-volatile configuration memory.
    > > 8192K bytes of processor board System flash (Read/Write)
    > > 2048K bytes of processor board Web flash (Read/Write)
    > >
    > > Configuration register is 0x2102
    > >
    > > Any help on this issue would be greatly appreciated.
    > >
    > > -Brad
    Brad B., Jul 9, 2003
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. J R

    IOS version for 806?

    J R, Dec 7, 2003, in forum: Cisco
    Replies:
    2
    Views:
    387
    Phillip Remaker
    Dec 7, 2003
  2. Luc
    Replies:
    0
    Views:
    458
  3. Luc
    Replies:
    0
    Views:
    417
  4. Chris Dickens
    Replies:
    0
    Views:
    556
    Chris Dickens
    Jun 4, 2004
  5. ccannick

    Cisco 2511 and SSH (IOS 12.2)

    ccannick, Mar 11, 2006, in forum: Cisco
    Replies:
    8
    Views:
    7,806
Loading...

Share This Page