cisco 506e config

Discussion in 'Cisco' started by vollind@harneyesd.k12.or.us, Dec 15, 2004.

  1. 12.or.us

    12.or.us Guest

    How do i export a cisco pix config and import that config to another
    cisco pix. Commands would be helpful. Thank you in advance.
     
    12.or.us, Dec 15, 2004
    #1
    1. Advertising

  2. 12.or.us

    mcaissie Guest

    First make a tftp backup of your first unit
    1-install a tftp server on your inside network
    2-enter command ** tftp-server inside [TFTP_IP] /[configname.cfg] **
    3- save config with ** wr net **

    Ideally you would need a laptop with a tftp server on it for the next steps
    4-connect to the new unit through console and Tera terminal or Hyper
    Terminal
    5-flush existing config with ** wr erase ** + ** reload**
    6-answer no at the Pre-configure question

    Assuming your laptop have an ip address of 192.168.0.1 255.255.255.0
    7-plug laptop in the ethernet1 interface using a crossover cable
    8-** config t **
    9-**interface ethernet1 auto**
    10-** ip address inside 192.168.0.2 255.255.255.0**
    11-**conf net 192.168.0.1:[configname.cfg]**
    12-** wr mem**

    Your done

    Before doing this , verify that both units have the same firmware version
    and that the spare unit have
    all the encryption keys needed ( 3DES - rsa,...)

    <12.or.us> wrote in message
    news:...
    > How do i export a cisco pix config and import that config to another
    > cisco pix. Commands would be helpful. Thank you in advance.
    >
     
    mcaissie, Dec 15, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. bob
    Replies:
    7
    Views:
    723
  2. Anders Dahl Tollestrup

    PIX 506E DMZ config

    Anders Dahl Tollestrup, May 1, 2006, in forum: Cisco
    Replies:
    1
    Views:
    2,306
    Mark Williams
    May 1, 2006
  3. patnliz

    PIX 506E config question

    patnliz, Jul 6, 2006, in forum: Cisco
    Replies:
    2
    Views:
    825
    patnliz
    Jul 8, 2006
  4. mbvales

    PIX 506e config via PDM

    mbvales, Aug 26, 2006, in forum: General Computer Support
    Replies:
    1
    Views:
    2,614
    mbvales
    Aug 29, 2006
  5. Trendkill

    Re: Pix 506E config to tfp server

    Trendkill, Jun 9, 2008, in forum: Cisco
    Replies:
    3
    Views:
    2,482
Loading...

Share This Page