Cisco 4224 gateway ISDN Bri can't dialin

Discussion in 'VOIP' started by m.meuwese@cande.nl, May 7, 2006.

  1. Guest

    Hello,

    Currently I am training for the VOIP examn. To extend my skils I
    installed cisco callmanager 3.3(2) in combination with a Cisco 4224
    gateway.

    In VWIC1 and VIC3 are installed a VIC 2b-s/t te.
    In VWIC2 is a serial interface installed.

    After setting things up, callmanager is working in conjunction with the
    C4224. Only when I define the gateway, I can't select the BRI
    interfaces! Now I was wondering how to receive and place calls using
    the BRI interfaces.

    When I dial the BRI it displays the following:

    *May 7 15:15:28.306: dp_handle_isdn_is_signalling_channel_up: idb
    0x8247A610 status 1
    *May 7 15:15:28.306: dp_check_and_notify_all_dp_state peer_tag 99940
    *May 7 15:15:28.306: dp_check_and_notify_all_dp_state tag 99940
    prev_state 0 curr_state 0
    *May 7 15:15:28.306: dp_check_and_notify_all_dp_state peer_tag 1
    *May 7 15:15:28.306: dpCheckTerminationStatus : Layer1 or Layer2 is
    down, idb=0x8247A610
    *May 7 15:15:28.306: dp_check_and_notify_all_dp_state tag 1 prev_state
    0 curr_state 0
    *May 7 15:15:28.342: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/1,
    TEI 97 changed to up
    *May 7 15:15:28.358: %LINK-3-UPDOWN: Interface BRI1/1, changed state
    to up
    *May 7 15:15:28.590: ISDN BR1/1 Q931: RX <- SETUP_ACK pd = 8 callref
    = 0xE8
    Channel ID i = 0x89
    Progress Ind i = 0x8288 - In-band info or appropriate now
    available
    *May 7 15:15:29.466: ISDN BR1/1 Q931: RX <- CALL_PROC pd = 8 callref
    = 0xE8
    *May 7 15:15:29.590: ISDN BR1/1 Q931: RX <- SETUP pd = 8 callref =
    0x5D
    Sending Complete
    Bearer Capability i = 0x9090A3
    Standard = CCITT
    Transfer Capability = 3.1kHz Audio
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0x8A
    Progress Ind i = 0x8081 - Call not end-to-end ISDN, may have
    in-band info
    Calling Party Number i = 0x2181, '223684194'
    Plan:ISDN, Type:National
    Called Party Number i = 0xA1, '223684715'
    Plan:ISDN, Type:National
    *May 7 15:15:29.590: Inside dpMatchCore:
    *May 7 15:15:29.590: destination pattn: 223684715 expanded string:
    223684715
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    223684715
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: dpAssociateIncomingPeer_T null source route
    label
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    223684715
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: dpAssociateIncomingPeer_T null source route
    label
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    223684715
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: Inside dpMatchCore:
    *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    223684194
    *May 7 15:15:29.594: ERROR::chopin_find_voice_chnl_nailup: no channel
    *May 7 15:15:29.594: chopin_dsprm_bri_voice_connect: failed cdb
    0x82C48580
    *May 7 15:15:29.598: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8
    callref = 0xDD
    Cause i = 0x80AF - Resource unavailable, unspecified
    *May 7 15:15:32.898: ISDN BR1/1 Q931: RX <- RELEASE_COMP pd = 8
    callref = 0xE8
    Cause i = 0x8090 - Normal call clearing
    *May 7 15:15:32.978: ISDN BR1/1 Q931: RX <- RELEASE pd = 8 callref =
    0x5D
    Cause i = 0x8090 - Normal call clearing
    *May 7 15:15:39.802: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR1/1,
    TEI 97 changed to down
    *May 7 15:15:56.626: ISDN BR1/1 Q931: L3_ShutDown: Shutting down ISDN
    Layer 3
    *May 7 15:15:56.678: %LINK-3-UPDOWN: Interface BRI1/1, changed state
    to down

    There is one error which I can't find on the internet:
    ERROR::chopin_find_voice_chnl_nailup: no channel

    Does anybody know what this means?

    Can anybody help me with a pease of code, from which i can read what
    needs to be done to get this working.

    My IP phone has this number attached: 715

    thx in advance
     
    , May 7, 2006
    #1
    1. Advertising

  2. Jonathan Guest

    <> wrote in message
    news:...
    > Hello,
    >
    > Currently I am training for the VOIP examn. To extend my skils I
    > installed cisco callmanager 3.3(2) in combination with a Cisco 4224
    > gateway.
    >
    > In VWIC1 and VIC3 are installed a VIC 2b-s/t te.
    > In VWIC2 is a serial interface installed.
    >
    > After setting things up, callmanager is working in conjunction with the
    > C4224. Only when I define the gateway, I can't select the BRI
    > interfaces! Now I was wondering how to receive and place calls using
    > the BRI interfaces.
    >
    > When I dial the BRI it displays the following:
    >
    > *May 7 15:15:28.306: dp_handle_isdn_is_signalling_channel_up: idb
    > 0x8247A610 status 1
    > *May 7 15:15:28.306: dp_check_and_notify_all_dp_state peer_tag 99940
    > *May 7 15:15:28.306: dp_check_and_notify_all_dp_state tag 99940
    > prev_state 0 curr_state 0
    > *May 7 15:15:28.306: dp_check_and_notify_all_dp_state peer_tag 1
    > *May 7 15:15:28.306: dpCheckTerminationStatus : Layer1 or Layer2 is
    > down, idb=0x8247A610
    > *May 7 15:15:28.306: dp_check_and_notify_all_dp_state tag 1 prev_state
    > 0 curr_state 0
    > *May 7 15:15:28.342: %ISDN-6-LAYER2UP: Layer 2 for Interface BR1/1,
    > TEI 97 changed to up
    > *May 7 15:15:28.358: %LINK-3-UPDOWN: Interface BRI1/1, changed state
    > to up
    > *May 7 15:15:28.590: ISDN BR1/1 Q931: RX <- SETUP_ACK pd = 8 callref
    > = 0xE8
    > Channel ID i = 0x89
    > Progress Ind i = 0x8288 - In-band info or appropriate now
    > available
    > *May 7 15:15:29.466: ISDN BR1/1 Q931: RX <- CALL_PROC pd = 8 callref
    > = 0xE8
    > *May 7 15:15:29.590: ISDN BR1/1 Q931: RX <- SETUP pd = 8 callref =
    > 0x5D
    > Sending Complete
    > Bearer Capability i = 0x9090A3
    > Standard = CCITT
    > Transfer Capability = 3.1kHz Audio
    > Transfer Mode = Circuit
    > Transfer Rate = 64 kbit/s
    > Channel ID i = 0x8A
    > Progress Ind i = 0x8081 - Call not end-to-end ISDN, may have
    > in-band info
    > Calling Party Number i = 0x2181, '223684194'
    > Plan:ISDN, Type:National
    > Called Party Number i = 0xA1, '223684715'
    > Plan:ISDN, Type:National
    > *May 7 15:15:29.590: Inside dpMatchCore:
    > *May 7 15:15:29.590: destination pattn: 223684715 expanded string:
    > 223684715
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    > 223684715
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: dpAssociateIncomingPeer_T null source route
    > label
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    > 223684715
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: dpAssociateIncomingPeer_T null source route
    > label
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684715 expanded string:
    > 223684715
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: Inside dpMatchCore:
    > *May 7 15:15:29.594: destination pattn: 223684194 expanded string:
    > 223684194
    > *May 7 15:15:29.594: ERROR::chopin_find_voice_chnl_nailup: no channel
    > *May 7 15:15:29.594: chopin_dsprm_bri_voice_connect: failed cdb
    > 0x82C48580
    > *May 7 15:15:29.598: ISDN BR1/1 Q931: TX -> RELEASE_COMP pd = 8
    > callref = 0xDD
    > Cause i = 0x80AF - Resource unavailable, unspecified
    > *May 7 15:15:32.898: ISDN BR1/1 Q931: RX <- RELEASE_COMP pd = 8
    > callref = 0xE8
    > Cause i = 0x8090 - Normal call clearing
    > *May 7 15:15:32.978: ISDN BR1/1 Q931: RX <- RELEASE pd = 8 callref =
    > 0x5D
    > Cause i = 0x8090 - Normal call clearing
    > *May 7 15:15:39.802: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR1/1,
    > TEI 97 changed to down
    > *May 7 15:15:56.626: ISDN BR1/1 Q931: L3_ShutDown: Shutting down ISDN
    > Layer 3
    > *May 7 15:15:56.678: %LINK-3-UPDOWN: Interface BRI1/1, changed state
    > to down
    >
    > There is one error which I can't find on the internet:
    > ERROR::chopin_find_voice_chnl_nailup: no channel
    >
    > Does anybody know what this means?
    >
    > Can anybody help me with a pease of code, from which i can read what
    > needs to be done to get this working.
    >
    > My IP phone has this number attached: 715
    >
    > thx in advance
    >


    I assume the gateway is setup in CallManager as H.323 (considering there is
    no MGCP support for this GW)... Do you have a voip dial-peer pointing back
    to the CCM?

    Because this:

    > Cause i = 0x80AF - Resource unavailable, unspecified


    Indicates the gateway has no idea what to do with the call.

    Also, is the gateway setup in CCM?

    BTW, you should really upgrade the CCM to 3.3(5)sr2



    Jonathan



    Jonathan


    --
    NewsGuy.Com 30Gb $9.95 Carry Forward and On Demand Bandwidth
     
    Jonathan, May 14, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Kai Bleek
    Replies:
    2
    Views:
    2,279
    Kai Bleek
    Jul 14, 2004
  2. Garry Glendown

    What am I missing? (BRI dialin)

    Garry Glendown, Dec 17, 2004, in forum: Cisco
    Replies:
    12
    Views:
    2,053
    Garry Glendown
    Dec 20, 2004
  3. Replies:
    1
    Views:
    949
    Aaron Leonard
    Dec 2, 2005
  4. Christoph Gartmann

    2503I & analog modem dialin to BRI?

    Christoph Gartmann, Mar 28, 2006, in forum: Cisco
    Replies:
    1
    Views:
    742
    Aaron Leonard
    Mar 28, 2006
  5. kazz
    Replies:
    0
    Views:
    747
Loading...

Share This Page