Cisco 2950 restart every 2 min

Discussion in 'Cisco' started by blue-birdy, Mar 5, 2008.

  1. blue-birdy

    blue-birdy Guest

    Hai everybdy,
    Iam wondering why cisco catclyst 2950 restsrts every 2 min.....i got
    into switch thru console an dfound the following....can anyone help me
    out with this ?wat kind of problem is that/////


    ""''''''''''''''''''''''''''''''''''''''''''''''''''''''"Initializing
    flashfs...
    flashfs[l]: 16 files, 2 directories
    flashfs[l] : 0 orphaned files, 0 orphaned directories
    flashfs[l] : Total bytes: 7741440
    flashfs[l] : Bytes used: 3975168
    flashfs[l]: Bytes available: 3766272
    flashfs[l]: flashfs fsck took 6 seconds.
    flashfs[l] : Initialization complete.
    Done initializing flashfs.
    POST: System Board Test : Passed
    Flushing messages (00:00:09 UTC Mon Mar 1 1993)
    Buffered messages:
    Queued messages:


    Crash Fault History
    C2950 Software (C2950--16Q4L2--M), Version 12.l(6)EA2c, RELEASE SOFTWARE
    (fcl)
    Compiled Thu 28-Feb-02 14:44 by antonino
    Signal = 10, Code = OxlC, Uptime 00:00:09
    rO: 00000000, AT: 00000000, vO: 00000000, vl: 00000001
    aO: 8OB3CE1O, al: 40000800, a2: 00000004, a3: 8OB3CE1O
    tO: 00000003, tl: l000ElOl, t2: 802AF5B8, t3: FFFFOOFF
    t4: 802AF5A0, t5: 00000000, t6: 80B3CF78, t7: 00000008
    sO: 00000800, sl: 8OB3CE1O, s2: 00000000, s3: 80BA98B4
    s4: 00000000, s5: 00000002, s6: 8OB3CE1O, s7: 00000001
    t8: 00000000, t9: 805CAF54, kO: 00000000, kl: 00000000
    gp: 805BEC20, sp: 8OB3CDA8, s8: 00000007, ra: 80271334
    EPC: 80429114, ErrEPC: 802AD4C4, BadVA: OxEDABEFFE, SREG: l000ElO3
    Cause: Ox00002OlC (code 7): Data Bus Error exception
    --Traceback= 80429114 80271334 8027ll0C 80272324 80273AA8 80278188
    80274FBC 80275298 8O2BOCAC 801B9084 8C

    C2950 Boot Loader (C2950--HBOOT--M) Version 12.l(6)EA2c, RELEASE
    SOFTWARE (fcl)
    Compiled Thu 28--Feb--02 14:59 by antonino
    WS--C2950--24 starting.
    Base ethernet MAC Address: 00:Od:28:bf:cd:40
    Xmodem file system is available.
    """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    blue-birdy, Mar 5, 2008
    #1
    1. Advertising

  2. On Mar 5, 3:10 am, blue-birdy <> wrote:
    > Hai everybdy,
    > Iam wondering why cisco catclyst 2950 restsrts every 2 min.....i got
    > into switch thru console an dfound the following....can anyone help me
    > out with this ?wat kind of problem is that/////
    >
    > ""''''''''''''''''''''''''''''''''''''''''''''''''''''''"Initializing
    > flashfs...
    > flashfs[l]: 16 files, 2 directories
    > flashfs[l] : 0 orphaned files, 0 orphaned directories
    > flashfs[l] : Total bytes: 7741440
    > flashfs[l] : Bytes used: 3975168
    > flashfs[l]: Bytes available: 3766272
    > flashfs[l]: flashfs fsck took 6 seconds.
    > flashfs[l] : Initialization complete.
    > Done initializing flashfs.
    > POST: System Board Test : Passed
    > Flushing messages (00:00:09 UTC Mon Mar 1 1993)
    > Buffered messages:
    > Queued messages:
    >
    > Crash Fault History
    > C2950 Software (C2950--16Q4L2--M), Version 12.l(6)EA2c, RELEASE SOFTWARE
    > (fcl)
    > Compiled Thu 28-Feb-02 14:44 by antonino
    > Signal = 10, Code = OxlC, Uptime 00:00:09
    > rO: 00000000, AT: 00000000, vO: 00000000, vl: 00000001
    > aO: 8OB3CE1O, al: 40000800, a2: 00000004, a3: 8OB3CE1O
    > tO: 00000003, tl: l000ElOl, t2: 802AF5B8, t3: FFFFOOFF
    > t4: 802AF5A0, t5: 00000000, t6: 80B3CF78, t7: 00000008
    > sO: 00000800, sl: 8OB3CE1O, s2: 00000000, s3: 80BA98B4
    > s4: 00000000, s5: 00000002, s6: 8OB3CE1O, s7: 00000001
    > t8: 00000000, t9: 805CAF54, kO: 00000000, kl: 00000000
    > gp: 805BEC20, sp: 8OB3CDA8, s8: 00000007, ra: 80271334
    > EPC: 80429114, ErrEPC: 802AD4C4, BadVA: OxEDABEFFE, SREG: l000ElO3
    > Cause: Ox00002OlC (code 7): Data Bus Error exception
    > --Traceback= 80429114 80271334 8027ll0C 80272324 80273AA8 80278188
    > 80274FBC 80275298 8O2BOCAC 801B9084 8C
    >
    > C2950 Boot Loader (C2950--HBOOT--M) Version 12.l(6)EA2c, RELEASE
    > SOFTWARE (fcl)
    > Compiled Thu 28--Feb--02 14:59 by antonino
    > WS--C2950--24 starting.
    > Base ethernet MAC Address: 00:Od:28:bf:cd:40
    > Xmodem file system is available.
    > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""


    You would need to open a TAC with Cisco, but the IOS is corrupt; most
    likely due to bad memory. Have you tried to power it off or boot into
    ROMMON? You could also xmodem in ROMMON to see if its just a corrupt
    image.

    -nick
    sCissOrsRsharP, Mar 5, 2008
    #2
    1. Advertising

  3. blue-birdy

    blue-birdy Guest

    On Mar 5, 12:45 pm, sCissOrsRsharP <> wrote:
    > On Mar 5, 3:10 am, blue-birdy <> wrote:
    >
    >
    >
    >
    >
    > > Hai everybdy,
    > > Iam wondering why cisco catclyst 2950 restsrts every 2 min.....i got
    > > into switch thru console an dfound the following....can anyone help me
    > > out with this ?wat kind of problem is that/////

    >
    > > ""''''''''''''''''''''''''''''''''''''''''''''''''''''''"Initializing
    > > flashfs...
    > > flashfs[l]: 16 files, 2 directories
    > > flashfs[l] : 0 orphaned files, 0 orphaned directories
    > > flashfs[l] : Total bytes: 7741440
    > > flashfs[l] : Bytes used: 3975168
    > > flashfs[l]: Bytes available: 3766272
    > > flashfs[l]: flashfs fsck took 6 seconds.
    > > flashfs[l] : Initialization complete.
    > > Done initializing flashfs.
    > > POST: System Board Test : Passed
    > > Flushing messages (00:00:09 UTC Mon Mar 1 1993)
    > > Buffered messages:
    > > Queued messages:

    >
    > > Crash Fault History
    > > C2950 Software (C2950--16Q4L2--M), Version 12.l(6)EA2c, RELEASE SOFTWARE
    > > (fcl)
    > > Compiled Thu 28-Feb-02 14:44 by antonino
    > > Signal = 10, Code = OxlC, Uptime 00:00:09
    > > rO: 00000000, AT: 00000000, vO: 00000000, vl: 00000001
    > > aO: 8OB3CE1O, al: 40000800, a2: 00000004, a3: 8OB3CE1O
    > > tO: 00000003, tl: l000ElOl, t2: 802AF5B8, t3: FFFFOOFF
    > > t4: 802AF5A0, t5: 00000000, t6: 80B3CF78, t7: 00000008
    > > sO: 00000800, sl: 8OB3CE1O, s2: 00000000, s3: 80BA98B4
    > > s4: 00000000, s5: 00000002, s6: 8OB3CE1O, s7: 00000001
    > > t8: 00000000, t9: 805CAF54, kO: 00000000, kl: 00000000
    > > gp: 805BEC20, sp: 8OB3CDA8, s8: 00000007, ra: 80271334
    > > EPC: 80429114, ErrEPC: 802AD4C4, BadVA: OxEDABEFFE, SREG: l000ElO3
    > > Cause: Ox00002OlC (code 7): Data Bus Error exception
    > > --Traceback= 80429114 80271334 8027ll0C 80272324 80273AA8 80278188
    > > 80274FBC 80275298 8O2BOCAC 801B9084 8C

    >
    > > C2950 Boot Loader (C2950--HBOOT--M) Version 12.l(6)EA2c, RELEASE
    > > SOFTWARE (fcl)
    > > Compiled Thu 28--Feb--02 14:59 by antonino
    > > WS--C2950--24 starting.
    > > Base ethernet MAC Address: 00:Od:28:bf:cd:40
    > > Xmodem file system is available.
    > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

    >
    > You would need to open a TAC with Cisco, but the IOS is corrupt; most
    > likely due to bad memory.  Have you tried to power it off or boot into
    > ROMMON? You could also xmodem in ROMMON to see if its just a corrupt
    > image.
    >
    > -nick- Hide quoted text -
    >
    > - Show quoted text -


    Hai thank u fo rthe reply......
    Iam new to netwrking.....can u tell me how to boot in ROMMON and wat
    is xmodem?Is there any guideline from cisco?
    How to see if the image is corrupted?

    Thank u in advance
    blue-birdy, Mar 5, 2008
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. =?Utf-8?B?dGhlIGJyYWQ=?=

    Being kicked off every 5 min...

    =?Utf-8?B?dGhlIGJyYWQ=?=, Aug 8, 2004, in forum: Wireless Networking
    Replies:
    1
    Views:
    696
  2. Sam Soh
    Replies:
    1
    Views:
    1,413
    donjohnston
    Mar 1, 2009
  3. Opsimath

    XP restart vs msconfig restart

    Opsimath, Jul 29, 2005, in forum: Computer Support
    Replies:
    4
    Views:
    3,948
  4. another MickG

    Restart Now - Restart Later

    another MickG, Apr 23, 2006, in forum: Computer Support
    Replies:
    14
    Views:
    943
    Duane Arnold
    Apr 24, 2006
  5. Evan Platt

    10 to 15 min. my computetr will stop and restart

    Evan Platt, Apr 13, 2009, in forum: Computer Support
    Replies:
    11
    Views:
    686
    detap
    Apr 16, 2009
Loading...

Share This Page