CISCO 2504 issue

Discussion in 'Cisco' started by SamPasic@gmail.com, Mar 25, 2008.

  1. Guest

    Hi Everyone
    I am new to teh whole Cisco field, I am going to train to get my CCNA
    and currecntly I am working for a company that handles the equipment
    and luckily I am one of the testers. Usually small stuff like show
    version and things of that nature but I am also repsonsible for
    figuring out what is wrong. Currenctly I am working on two Cisco
    2504's and both seem to have the same problem. They load correctly,
    but once everything boots, and I get to the RETURN section and press
    enter....it freezes up and does not do anything. I tried breaking it
    but it freezes at that moment too. Any ideas what might be wrong, or
    is it just broken???
    Thank You
     
    , Mar 25, 2008
    #1
    1. Advertising

  2. Merv Guest

    >Currenctly I am working on two Cisco
    > 2504's and both seem to have the same problem. They load correctly,
    > but once everything boots, and I get to the RETURN section and press
    > enter....it freezes up and does not do anything.



    capture and post the console log from the time you power on the router
    to the point where it freezes
     
    Merv, Mar 25, 2008
    #2
    1. Advertising

  3. Thrill5 Guest

    Bad flash, bad memory or a corrupted image stored on the flash.

    <> wrote in message
    news:...
    > Hi Everyone
    > I am new to teh whole Cisco field, I am going to train to get my CCNA
    > and currecntly I am working for a company that handles the equipment
    > and luckily I am one of the testers. Usually small stuff like show
    > version and things of that nature but I am also repsonsible for
    > figuring out what is wrong. Currenctly I am working on two Cisco
    > 2504's and both seem to have the same problem. They load correctly,
    > but once everything boots, and I get to the RETURN section and press
    > enter....it freezes up and does not do anything. I tried breaking it
    > but it freezes at that moment too. Any ideas what might be wrong, or
    > is it just broken???
    > Thank You
     
    Thrill5, Mar 26, 2008
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. pastypies

    Connecting to my 2504 router?

    pastypies, Nov 8, 2003, in forum: Cisco
    Replies:
    4
    Views:
    1,137
    Walter Roberson
    Nov 8, 2003
  2. Kristian Davies

    Cisco 2504 Password reset

    Kristian Davies, Nov 13, 2003, in forum: Cisco
    Replies:
    6
    Views:
    7,327
    Juergen Ilse
    Nov 14, 2003
  3. John
    Replies:
    1
    Views:
    4,765
  4. Voitec
    Replies:
    5
    Views:
    7,777
    Voitec
    Sep 12, 2004
  5. Istvan Takacs

    2504 router w Token Ring port?

    Istvan Takacs, Oct 19, 2004, in forum: Cisco
    Replies:
    1
    Views:
    476
    Pete Mainwaring
    Oct 21, 2004
Loading...

Share This Page