Cisco 1841 DSL woe's - what does this 'debug atm events' output mean?

Discussion in 'Cisco' started by unprogram@gmail.com, Mar 29, 2009.

  1. Guest

    The DSL is not seeing 'showtime!' from the ISP - is this simply that
    it cannot see the ISP's signal or could it be that the telephone line
    quality is too bad (there is a very long telephone extension on the
    line, sound is crackly)

    I ask this because there seems to be *something* that is going on in
    debug atm events.

    Thanks in advance!

    000260: *Mar 27 12:12:48.803 UTC: set tx_gain_offset to 0
    000261: *Mar 27 12:12:48.803 UTC: set rx_gain_offset to 0
    000262: *Mar 27 12:12:48.803 UTC: set target_noise_margin_offset to 0
    000263: *Mar 27 12:12:48.803 UTC: set max_bits_tone_limit to 15
    000264: *Mar 27 12:12:48.803 UTC: changed current state to do open!!
    000265: *Mar 27 12:12:48.803 UTC: DSL: SM: [DMTDSL_DLOAD_2 ->
    DMTDSL_DO_OPEN]
    000266: *Mar 27 12:12:48.803 UTC: DSL: Send ADSL_OPEN command.
    000267: *Mar 27 12:12:48.803 UTC: DSL(ATM0): Using subfunction 0x0
    000268: *Mar 27 12:12:48.803 UTC: LOCAL:Max noise margin for power
    cutoff 31
    000269: *Mar 27 12:12:48.803 UTC: DSL(ATM0): Sent extended command 0x3
    000270: *Mar 27 12:12:51.303 UTC: DSL(ATM0): 1: Modem state = 0x8
    000271: *Mar 27 12:12:53.803 UTC: DSL(ATM0): 2: Modem state = 0x8
    000272: *Mar 27 12:12:56.303 UTC: DSL(ATM0): 3: Modem state = 0x8
    000273: *Mar 27 12:12:58.803 UTC: DSL(ATM0): 4: Modem state = 0x8
    000274: *Mar 27 12:13:01.303 UTC: DSL(ATM0): 5: Modem state = 0x8
    000275: *Mar 27 12:13:03.803 UTC: DSL(ATM0): 6: Modem state = 0x8
    000276: *Mar 27 12:13:06.303 UTC: DSL(ATM0): 7: Modem state = 0x8
    000277: *Mar 27 12:13:08.803 UTC: DSL(ATM0): 8: Modem state = 0x8
    000278: *Mar 27 12:13:11.303 UTC: DSL(ATM0): 9: Modem state = 0x8
    000279: *Mar 27 12:13:13.803 UTC: DSL(ATM0): 10: Modem state = 0x8
    000280: *Mar 27 12:13:16.303 UTC: DSL(ATM0): 11: Modem state = 0x8
    000281: *Mar 27 12:13:18.803 UTC: DSL(ATM0): 12: Modem state = 0x8
    000282: *Mar 27 12:13:21.303 UTC: DSL(ATM0): 13: Modem state = 0x8
    000283: *Mar 27 12:13:23.803 UTC: DSL(ATM0): 14: Modem state = 0x8
    000284: *Mar 27 12:13:26.303 UTC: DSL(ATM0): 15: Modem state = 0x8
    000285: *Mar 27 12:13:28.803 UTC: DSL(ATM0): 16: Modem state = 0x8
    000286: *Mar 27 12:13:31.303 UTC: DSL(ATM0): 17: Modem state = 0x8
    000287: *Mar 27 12:13:33.803 UTC: DSL(ATM0): 18: Modem state = 0x8
    000288: *Mar 27 12:13:36.303 UTC: DSL(ATM0): 19: Modem state = 0x8
    000289: *Mar 27 12:13:38.803 UTC: DSL(ATM0): 20: Modem state = 0x8
    000290: *Mar 27 12:13:41.303 UTC: DSL(ATM0): 21: Modem state = 0x8
    000291: *Mar 27 12:13:43.803 UTC: DSL(ATM0): 22: Modem state = 0x8
    000292: *Mar 27 12:13:46.303 UTC: DSL(ATM0): 23: Modem state = 0x8
    000293: *Mar 27 12:13:48.803 UTC: DSL(ATM0): 24: Modem state = 0x8
    000294: *Mar 27 12:13:51.303 UTC: DSL(ATM0): 25: Modem state = 0x8
    000295: *Mar 27 12:13:53.803 UTC: DSL(ATM0): 26: Modem state = 0x8
    000296: *Mar 27 12:13:56.303 UTC: DSL(ATM0): 27: Modem state = 0x8
    000297: *Mar 27 12:13:58.803 UTC: DSL(ATM0): 28: Modem state = 0x8
    000298: *Mar 27 12:14:01.303 UTC: DSL(ATM0): 29: Modem state = 0x8
    000299: *Mar 27 12:14:03.803 UTC: DSL(ATM0): 30: Modem state = 0x8
    000300: *Mar 27 12:14:06.303 UTC: DSL(ATM0): Could not establish
    connection event=1
    000301: *Mar 27 12:14:06.303 UTC: DSL: SM: [DMTDSL_DO_OPEN ->
    DMTDSL_INIT]
    000302: *Mar 27 12:14:06.303 UTC: DSL: Reset the framer and AFE
    000303: *Mar 27 12:14:06.331 UTC: DSL: SM: [DMTDSL_INIT ->
    DMTDSL_DLOAD_1]
    000304: *Mar 27 12:14:06.331 UTC: DSL: Downloading init_AMR-
    R-2.5.042_no_bist.bin
    000305: *Mar 27 12:14:06.331 UTC: DSL:(ATM0) Downloaded 2 blocks...
    Finished!
    000306: *Mar 27 12:14:06.331 UTC: DSL(ATM0): Sent command 0x14
    000307: *Mar 27 12:14:08.331 UTC: DSL: Received response: 0x80
    000308: *Mar 27 12:14:08.331 UTC: DSL: SM: [DMTDSL_DLOAD_1 ->
    DMTDSL_DLOAD_2]
    000309: *Mar 27 12:14:08.331 UTC: DSL: Downloading AMR-R-2.5.042.bin
    000310: *Mar 27 12:14:08.367 UTC: DSL(ATM0): Downloaded 100 blocks
    000311: *Mar 27 12:14:08.399 UTC: DSL(ATM0): Downloaded 200 blocks
    000312: *Mar 27 12:14:08.435 UTC: DSL(ATM0): Downloaded 300 blocks
    000313: *Mar 27 12:14:08.475 UTC: DSL(ATM0): Downloaded 400 blocks
    000314: *Mar 27 12:14:08.507 UTC: DSL(ATM0): Downloaded 500 blocks
    000315: *Mar 27 12:14:08.543 UTC: DSL(ATM0): Downloaded 600 blocks
    000316: *Mar 27 12:14:08.579 UTC: DSL(ATM0): Downloaded 700 blocks
    000317: *Mar 27 12:14:08.615 UTC: DSL(ATM0): Downloaded 800 blocks
    000318: *Mar 27 12:14:08.651 UTC: DSL(ATM0): Downloaded 900 blocks
    000319: *Mar 27 12:14:08.683 UTC: DSL(ATM0): Downloaded 1000 blocks
    000320: *Mar 27 12:14:08.719 UTC: DSL(ATM0): Downloaded 1100 blocks
    000321: *Mar 27 12:14:08.755 UTC: DSL(ATM0): Downloaded 1200 blocks
    000322: *Mar 27 12:14:08.791 UTC: DSL(ATM0): Downloaded 1300 blocks
    000323: *Mar 27 12:14:08.823 UTC: DSL(ATM0): Downloaded 1400 blocks
    000324: *Mar 27 12:14:08.863 UTC: DSL(ATM0): Downloaded 1500 blocks
    000325: *Mar 27 12:14:08.895 UTC: DSL(ATM0): Downloaded 1600 blocks
    000326: *Mar 27 12:14:08.931 UTC: DSL(ATM0): Downloaded 1700 blocks
    000327: *Mar 27 12:14:08.967 UTC: DSL(ATM0): Downloaded 1800 blocks
    000328: *Mar 27 12:14:09.003 UTC: DSL(ATM0): Downloaded 1900 blocks
    000329: *Mar 27 12:14:09.035 UTC: DSL(ATM0): Downloaded 2000 blocks
    000330: *Mar 27 12:14:09.071 UTC: DSL(ATM0): Downloaded 2100 blocks
    000331: *Mar 27 12:14:09.107 UTC: DSL(ATM0): Downloaded 2200 blocks
    000332: *Mar 27 12:14:09.143 UTC: DSL(ATM0): Downloaded 2300 blocks
    000333: *Mar 27 12:14:09.179 UTC: DSL(ATM0): Downloaded 2400 blocks
    000334: *Mar 27 12:14:09.211 UTC: DSL(ATM0): Downloaded 2500 blocks
    000335: *Mar 27 12:14:09.247 UTC: DSL(ATM0): Downloaded 2600 blocks
    000336: *Mar 27 12:14:09.283 UTC: DSL(ATM0): Downloaded 2700 blocks
    000337: *Mar 27 12:14:09.319 UTC: DSL(ATM0): Downloaded 2800 blocks
    000338: *Mar 27 12:14:09.355 UTC: DSL(ATM0): Downloaded 2900 blocks
    000339: *Mar 27 12:14:09.387 UTC: DSL(ATM0): Downloaded 3000 blocks
    000340: *Mar 27 12:14:09.427 UTC: DSL(ATM0): Downloaded 3100 blocks
    000341: *Mar 27 12:14:09.463 UTC: DSL(ATM0): Downloaded 3200 blocks
    000342: *Mar 27 12:14:09.499 UTC: DSL(ATM0): Downloaded 3300 blocks
    000343: *Mar 27 12:14:09.535 UTC: DSL(ATM0): Downloaded 3400 blocks
    000344: *Mar 27 12:14:09.567 UTC: DSL(ATM0): Downloaded 3500 blocks
    000345: *Mar 27 12:14:09.607 UTC: DSL(ATM0): Downloaded 3600 blocks
    000346: *Mar 27 12:14:09.639 UTC: DSL(ATM0): Downloaded 3700 blocks
    000347: *Mar 27 12:14:09.675 UTC: DSL(ATM0): Downloaded 3800 blocks
    000348: *Mar 27 12:14:09.683 UTC: DSL:(ATM0) Downloaded 3824 blocks...
    Finished!
    000349: *Mar 27 12:14:09.683 UTC: DSL(ATM0): Sent command 0x14
    000350: *Mar 27 12:14:11.683 UTC: set tx_gain_offset to 0
    000351: *Mar 27 12:14:11.683 UTC: set rx_gain_offset to 0
    000352: *Mar 27 12:14:11.683 UTC: set target_noise_margin_offset to 0
    000353: *Mar 27 12:14:11.683 UTC: set max_bits_tone_limit to 15
    000354: *Mar 27 12:14:11.683 UTC: changed current state to do open!!
    000355: *Mar 27 12:14:11.683 UTC: DSL: SM: [DMTDSL_DLOAD_2 ->
    DMTDSL_DO_OPEN]
    000356: *Mar 27 12:14:11.683 UTC: DSL: Send ADSL_OPEN command.
    000357: *Mar 27 12:14:11.683 UTC: DSL(ATM0): Using subfunction 0x0
    000358: *Mar 27 12:14:11.683 UTC: LOCAL:Max noise margin for power
    cutoff 31
    000359: *Mar 27 12:14:11.683 UTC: DSL(ATM0): Sent extended command 0x3
    000360: *Mar 27 12:14:14.183 UTC: DSL(ATM0): 1: Modem state = 0x8
    000361: *Mar 27 12:14:16.683 UTC: DSL(ATM0): 2: Modem state = 0x8
    000362: *Mar 27 12:14:19.183 UTC: DSL(ATM0): 3: Modem state = 0x8
    000363: *Mar 27 12:14:21.683 UTC: DSL(ATM0): 4: Modem state = 0x8
    000364: *Mar 27 12:14:24.183 UTC: DSL(ATM0): 5: Modem state = 0x8
    000365: *Mar 27 12:14:26.683 UTC: DSL(ATM0): 6: Modem state = 0x8
    000366: *Mar 27 12:14:29.183 UTC: DSL(ATM0): 7: Modem state = 0x8
    000367: *Mar 27 12:14:31.683 UTC: DSL(ATM0): 8: Modem state = 0x8
    000368: *Mar 27 12:14:34.183 UTC: DSL(ATM0): 9: Modem state = 0x8
    000369: *Mar 27 12:14:36.683 UTC: DSL(ATM0): 10: Modem state = 0x8
    000370: *Mar 27 12:14:39.183 UTC: DSL(ATM0): 11: Modem state = 0x8
    000371: *Mar 27 12:14:41.683 UTC: DSL(ATM0): 12: Modem state = 0x8
    000372: *Mar 27 12:14:44.183 UTC: DSL(ATM0): 13: Modem state = 0x8
    000373: *Mar 27 12:14:46.683 UTC: DSL(ATM0): 14: Modem state = 0x8
    000374: *Mar 27 12:14:49.183 UTC: DSL(ATM0): 15: Modem state = 0x8
    000375: *Mar 27 12:14:51.683 UTC: DSL(ATM0): 16: Modem state = 0x8
    000376: *Mar 27 12:14:54.183 UTC: DSL(ATM0): 17: Modem state = 0x8
    000377: *Mar 27 12:14:56.683 UTC: DSL(ATM0): 18: Modem state = 0x8
    000378: *Mar 27 12:14:59.183 UTC: DSL(ATM0): 19: Modem state = 0x8
    000379: *Mar 27 12:15:01.683 UTC: DSL(ATM0): 20: Modem state = 0x8
    000380: *Mar 27 12:15:04.183 UTC: DSL(ATM0): 21: Modem state = 0x8
    000381: *Mar 27 12:15:06.683 UTC: DSL(ATM0): 22: Modem state = 0x8
    000382: *Mar 27 12:15:09.183 UTC: DSL(ATM0): 23: Modem state = 0x8
    000383: *Mar 27 12:15:11.683 UTC: DSL(ATM0): 24: Modem state = 0x8
    000384: *Mar 27 12:15:14.183 UTC: DSL(ATM0): 25: Modem state = 0x8
    000385: *Mar 27 12:15:16.683 UTC: DSL(ATM0): 26: Modem state = 0x8
    000386: *Mar 27 12:15:19.183 UTC: DSL(ATM0): 27: Modem state = 0x8
    000387: *Mar 27 12:15:21.683 UTC: DSL(ATM0): 28: Modem state = 0x8
    000388: *Mar 27 12:15:24.183 UTC: DSL(ATM0): 29: Modem state = 0x8
    000389: *Mar 27 12:15:26.683 UTC: DSL(ATM0): 30: Modem state = 0x8
    000390: *Mar 27 12:15:29.183 UTC: DSL(ATM0): Could not establish
    connection event=1
    000391: *Mar 27 12:15:29.183 UTC: DSL: SM: [DMTDSL_DO_OPEN ->
    DMTDSL_INIT]
    000392: *Mar 27 12:15:29.183 UTC: DSL: Reset the framer and AFE
    000393: *Mar 27 12:15:29.211 UTC: DSL: SM: [DMTDSL_INIT ->
    DMTDSL_DLOAD_1]
    000394: *Mar 27 12:15:29.211 UTC: DSL: Downloading init_AMR-
    R-2.5.042_no_bist.bin
    000395: *Mar 27 12:15:29.211 UTC: DSL:(ATM0) Downloaded 2 blocks...
    Finished!
    000396: *Mar 27 12:15:29.211 UTC: DSL(ATM0): Sent command 0x14
    000397: *Mar 27 12:15:31.211 UTC: DSL: Received response: 0x80
    000398: *Mar 27 12:15:31.211 UTC: DSL: SM: [DMTDSL_DLOAD_1 ->
    DMTDSL_DLOAD_2]
    000399: *Mar 27 12:15:31.211 UTC: DSL: Downloading AMR-R-2.5.042.bin
    000400: *Mar 27 12:15:31.247 UTC: DSL(ATM0): Downloaded 100 blocks
    000401: *Mar 27 12:15:31.279 UTC: DSL(ATM0): Downloaded 200 blocks
    000402: *Mar 27 12:15:31.315 UTC: DSL(ATM0): Downloaded 300 blocks
    000403: *Mar 27 12:15:31.351 UTC: DSL(ATM0): Downloaded 400 blocks
    000404: *Mar 27 12:15:31.387 UTC: DSL(ATM0): Downloaded 500 blocks
    000405: *Mar 27 12:15:31.423 UTC: DSL(ATM0): Downloaded 600 blocks
    000406: *Mar 27 12:15:31.455 UTC: DSL(ATM0): Downloaded 700 blocks
    000407: *Mar 27 12:15:31.495 UTC: DSL(ATM0): Downloaded 800 blocks
    000408: *Mar 27 12:15:31.531 UTC: DSL(ATM0): Downloaded 900 blocks
    000409: *Mar 27 12:15:31.563 UTC: DSL(ATM0): Downloaded 1000 blocks
    000410: *Mar 27 12:15:31.599 UTC: DSL(ATM0): Downloaded 1100 blocks
    000411: *Mar 27 12:15:31.635 UTC: DSL(ATM0): Downloaded 1200 blocks
    000412: *Mar 27 12:15:31.671 UTC: DSL(ATM0): Downloaded 1300 blocks
    000413: *Mar 27 12:15:31.703 UTC: DSL(ATM0): Downloaded 1400 blocks
    000414: *Mar 27 12:15:31.743 UTC: DSL(ATM0): Downloaded 1500 blocks
    000415: *Mar 27 12:15:31.775 UTC: DSL(ATM0): Downloaded 1600 blocks
    000416: *Mar 27 12:15:31.811 UTC: DSL(ATM0): Downloaded 1700 blocks
    000417: *Mar 27 12:15:31.847 UTC: DSL(ATM0): Downloaded 1800 blocks
    000418: *Mar 27 12:15:31.883 UTC: DSL(ATM0): Downloaded 1900 blocks
    000419: *Mar 27 12:15:31.915 UTC: DSL(ATM0): Downloaded 2000 blocks
    000420: *Mar 27 12:15:31.951 UTC: DSL(ATM0): Downloaded 2100 blocks
    000421: *Mar 27 12:15:31.987 UTC: DSL(ATM0): Downloaded 2200 blocks
    000422: *Mar 27 12:15:32.023 UTC: DSL(ATM0): Downloaded 2300 blocks
    000423: *Mar 27 12:15:32.059 UTC: DSL(ATM0): Downloaded 2400 blocks
    000424: *Mar 27 12:15:32.091 UTC: DSL(ATM0): Downloaded 2500 blocks
    000425: *Mar 27 12:15:32.127 UTC: DSL(ATM0): Downloaded 2600 blocks
    000426: *Mar 27 12:15:32.163 UTC: DSL(ATM0): Downloaded 2700 blocks
    000427: *Mar 27 12:15:32.199 UTC: DSL(ATM0): Downloaded 2800 blocks
    000428: *Mar 27 12:15:32.247 UTC: DSL(ATM0): Downloaded 2900 blocks
    000429: *Mar 27 12:15:32.279 UTC: DSL(ATM0): Downloaded 3000 blocks
    000430: *Mar 27 12:15:32.315 UTC: DSL(ATM0): Downloaded 3100 blocks
    000431: *Mar 27 12:15:32.351 UTC: DSL(ATM0): Downloaded 3200 blocks
    000432: *Mar 27 12:15:32.387 UTC: DSL(ATM0): Downloaded 3300 blocks
    000433: *Mar 27 12:15:32.423 UTC: DSL(ATM0): Downloaded 3400 blocks
    000434: *Mar 27 12:15:32.459 UTC: DSL(ATM0): Downloaded 3500 blocks
    000435: *Mar 27 12:15:32.495 UTC: DSL(ATM0): Downloaded 3600 blocks
    000436: *Mar 27 12:15:32.531 UTC: DSL(ATM0): Downloaded 3700 blocks
    000437: *Mar 27 12:15:32.567 UTC: DSL(ATM0): Downloaded 3800 blocks
    000438: *Mar 27 12:15:32.575 UTC: DSL:(ATM0) Downloaded 3824 blocks...
    Finished!
    000439: *Mar 27 12:15:32.575 UTC: DSL(ATM0): Sent command 0x14
    000440: *Mar 27 12:15:34.575 UTC: set tx_gain_offset to 0
    000441: *Mar 27 12:15:34.575 UTC: set rx_gain_offset to 0
    000442: *Mar 27 12:15:34.575 UTC: set target_noise_margin_offset to 0
    000443: *Mar 27 12:15:34.575 UTC: set max_bits_tone_limit to 15
    000444: *Mar 27 12:15:34.575 UTC: changed current state to do open!!
    000445: *Mar 27 12:15:34.575 UTC: DSL: SM: [DMTDSL_DLOAD_2 ->
    DMTDSL_DO_OPEN]
    000446: *Mar 27 12:15:34.575 UTC: DSL: Send ADSL_OPEN command.
    000447: *Mar 27 12:15:34.575 UTC: DSL(ATM0): Using subfunction 0x0
    000448: *Mar 27 12:15:34.575 UTC: LOCAL:Max noise margin for power
    cutoff 31
    000449: *Mar 27 12:15:34.575 UTC: DSL(ATM0): Sent extended command 0x3
     
    , Mar 29, 2009
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. chxx1
    Replies:
    0
    Views:
    497
    chxx1
    Apr 23, 2004
  2. Lonnie

    ISDN debug output help!!!!

    Lonnie, Sep 24, 2004, in forum: Cisco
    Replies:
    0
    Views:
    3,896
    Lonnie
    Sep 24, 2004
  3. RobO

    SOS - isakmp debug output

    RobO, Dec 16, 2004, in forum: Cisco
    Replies:
    1
    Views:
    11,416
  4. jh3ang

    what does debug outputs mean ?

    jh3ang, Mar 22, 2007, in forum: Cisco
    Replies:
    1
    Views:
    849
    Barry Margolin
    Mar 23, 2007
  5. gentouru
    Replies:
    0
    Views:
    2,233
    gentouru
    Mar 10, 2008
Loading...

Share This Page