Cisco 1721 ATM nightmare

Discussion in 'Cisco' started by podzol, Sep 7, 2006.

  1. podzol

    podzol

    Joined:
    Sep 7, 2006
    Messages:
    2
    Hi
    I am trying to get a 1721 atm interface to work with BT and I am not having much luck....... all I am getting is the Vi3 protocol not coming up and a continuous debug about "PPP: Authorization NOT required"

    Here's the relavant bits of config any help gratfully received:

    Current configuration : 4378 bytes
    !
    version 12.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    !
    hostname hostname
    !
    logging queue-limit 100
    enable secret 5 password
    !
    username root password 7 password
    aaa new-model
    !
    !
    aaa authentication login VTY local-case
    aaa session-id common
    ip subnet-zero
    no ip source-route
    !
    !
    ip domain name .com
    !
    no ip bootp server
    ip inspect max-incomplete low 200
    ip inspect max-incomplete high 400
    ip inspect one-minute low 50
    ip inspect one-minute high 100
    ip inspect name OUTBOUNDTRAFFIC tcp
    ip inspect name OUTBOUNDTRAFFIC udp
    ip inspect name OUTBOUNDTRAFFIC ftp
    ip inspect name OUTBOUNDTRAFFIC icmp
    ip audit notify log
    ip audit po max-events 100
    !
    !
    !!
    interface ATM0
    ip address dhcp
    ip mtu 1500
    no atm ilmi-keepalive
    pvc 0/35
    encapsulation aal5mux ppp dialer
    dialer pool-member 1
    !
    dsl operating-mode auto
    !
    interface Ethernet0
    no ip address
    shutdown
    !
    interface FastEthernet0
    ip address 10.x.x.x 255.255.255.0
    ip nat inside
    speed auto
    !
    interface Dialer1
    ip address 217.x.x.x 255.255.255.248
    ip nat outside
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap callout
    ppp chap hostname hostname
    ppp chap password 7 password
    !
    !
    ip nat inside source list NAT2 interface Dialer1 overload
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer1
    no ip http server
    no ip http secure-server
    !
    !
    !
    !
    dialer-list 1 protocol ip permit
    !

    line con 0
    line aux 0
    line vty 0 4
    access-class TELNETSSH in
    login authentication VTY
    transport input telnet ssh
    !
    no scheduler allocate
    end

    Interface IP-Address OK? Method Status Protocol

    Virtual-Access3 unassigned YES unset up down
    ATM0 unassigned YES manual up up
    ATM0.1 unassigned YES unset up up
    Dialer0 217.x.x.x YES manual up up
     
    podzol, Sep 7, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Iskander
    Replies:
    13
    Views:
    5,026
    Iskander
    Feb 23, 2005
  2. AM
    Replies:
    0
    Views:
    487
  3. hlep
    Replies:
    0
    Views:
    2,939
  4. andrew@millenniumstaff.co.uk

    Cisco 1721 ATM nightmare

    andrew@millenniumstaff.co.uk, Sep 8, 2006, in forum: Cisco
    Replies:
    0
    Views:
    423
    andrew@millenniumstaff.co.uk
    Sep 8, 2006
  5. andrew@millenniumstaff.co.uk

    Cisco 1721 ATM nightmare

    andrew@millenniumstaff.co.uk, Sep 8, 2006, in forum: Cisco
    Replies:
    3
    Views:
    612
    andrew@millenniumstaff.co.uk
    Sep 11, 2006
Loading...

Share This Page