Catalyst 4003 and WS-X4306-GB module

Discussion in 'Cisco' started by Vyacheslav Osokin, May 6, 2005.

  1. Hi, all!

    I have some trouble with Catalyst 4003 and WS-X4306 module. After power on
    come on diag modules (first, second and the third at last). All GBIC slots
    has "OK" in this test (include module 3 - WS-X4306), page down to look the
    log. But after start system module has red leds and "module 3 is not
    installed" in system. For example for reset module:
    ---------------------
    cisco> (enable) reset 3
    Module 3 is not installed.
    ---------------------

    CatOS version 6.1.1, try to upgrade on new CatOS 7.4.3 nothing results

    Start log:
    ----------------------------------------------------------------------------
    WS-X4012 bootrom version 5.4(1), built on 2000.04.04 10:48:54
    H/W Revisions:ššššMeteor:š4ššššComet:š8ššššBoard:š2
    Supervisor MAC addresses: 00:04:4e:fd:14:00 through 00:04:4e:fd:17:ff (1024
    addresses)
    Installed memory: 64 MB
    Testing LEDs.... done!
    The system will autoboot in 5 seconds.
    Type control-C to prevent autobooting.
    rommon 1 >
    The system will now begin autobooting.
    Autobooting image: "bootflash:cat4000.6-1-1.bin"
    ......................................................................................................................##############################
    Starting Off-line Diagnostics
    Mapping in TempFs
    Board type is WS-X4012
    DiagBootMode value is "post"
    Telling ApkPageMan that we have 12288 pages of memory
    Loading diagnostics...

    Power-on-self-test for Module 1:ššWS-X4012
    Status: (. = Pass, F = Fail)
    processor: .šššššššššššcpušsdram:š.šššššššššššrtc:š.
    eprom: .šššššššššššššššnvram:š.šššššššššššššššflash:š.
    temperature sensor: .ššenetšconsolešport:š.šššswitchšportš0:š.
    switch port 1: .šššššššswitchšportš2:š.šššššššswitchšportš3:š.
    switch port 4: .šššššššswitchšportš5:š.šššššššswitchšportš6:š.
    switch port 7: .šššššššswitchšportš8:š.šššššššswitchšportš9:š.
    switch port 10: .ššššššswitchšportš11:š.ššššššswitchšregisters:š.
    switch sram: .
    Module 1 Passed

    Power-on-self-test for Module 2:ššWS-X4232-GB-RJ
    Port status: (. = Pass, F = Fail)
    š1:š.ššš2:š.ššš3:š.ššš4:š.ššš5:š.ššš6:š.ššš7:š.ššš8:š.
    š9:š.šš10:š.šš11:š.šš12:š.šš13:š.šš14:š.šš15:š.šš16:š.
    17: .šš18:š.šš19:š.šš20:š.šš21:š.šš22:š.šš23:š.šš24:š.
    25: .šš26:š.šš27:š.šš28:š.šš29:š.šš30:š.šš31:š.šš32:š.
    33: .šš34:š.
    Module 2 Passed

    Power-on-self-test for Module 3:ššWS-X4306-GB
    Port status: (. = Pass, F = Fail)
    š1:š.ššš2:š.ššš3:š.ššš4:š.ššš5:š.ššš6:š.
    Module 3 Passed

    Exiting Off-line Diagnostics


    Cisco Systems, Inc. Console
    ----------------------------------------------------------------------------

    cisco> (enable) sho ver
    WS-C4003 Software, Version NmpSW: 6.1(1)
    Copyright (c) 1995-2000 by Cisco Systems, Inc.
    NMP S/W compiled on Sep 30 2000, 12:25:52
    GSP S/W compiled on Sep 28 2000, 18:28:28

    System Bootstrap Version: 5.4(1)

    Hardware Version: 2.1 Model: WS-C4003 Serial #: JAE050201X4

    Mod Port Model Serial # Versions
    --- ---- ---------- -------------------- ---------------------------------
    1 0 WS-X4012 JAE050201X4 Hw : 2.1
    Gsp: 6.1(1.0)
    Nmp: 6.1(1)
    2 34 WS-X4232-GB-RJ JAE0441043H Hw : 2.3

    DRAM FLASH NVRAM
    Module Total Used Free Total Used Free Total Used Free
    ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
    1 65536K 27831K 37705K 12288K 9139K 3149K 480K 168K 312K
    Vyacheslav Osokin, May 6, 2005
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. MIN

    cisco 4003 channel

    MIN, Jul 11, 2003, in forum: Cisco
    Replies:
    1
    Views:
    1,047
  2. mk

    4003 port channel

    mk, Feb 27, 2004, in forum: Cisco
    Replies:
    4
    Views:
    3,785
  3. Pawel
    Replies:
    1
    Views:
    485
  4. VongZa
    Replies:
    1
    Views:
    389
  5. Lovejoy

    Catalyst 4003 port speeds

    Lovejoy, Apr 30, 2007, in forum: Cisco
    Replies:
    3
    Views:
    402
    selixd
    May 9, 2007
Loading...

Share This Page