Catalyst 2950 Standard vs Enhanced Image

Discussion in 'Cisco' started by VeeDub, Sep 14, 2006.

  1. VeeDub

    VeeDub Guest

    Hi

    I have the same IOS version in flash on two 2950 switches but a show
    version output on each shows one as running a Standard Image and the
    other the Enhanced Image. The output is below. Any ideas why this would
    be?

    Thanks


    ___________________________________________________________________________
    SWITCH ONE
    ------------------------------
    Switch#sh version
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    RELEASE SOFTWAR
    E (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Thu 14-Jul-05 01:10 by antonino
    Image text-base: 0x80010000, data-base: 0x80674000

    ROM: Bootstrap program is C2950 boot loader

    Switch uptime is 7 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"


    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be
    found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email to
    .

    cisco WS-C2950-24 (RC32300) processor (revision M0) with 19986K bytes
    of memory.
    Processor board ID FOC0803X2VT
    Last reset from system-reset
    Running Standard Image
    24 FastEthernet/IEEE 802.3 interface(s)

    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0F:23:AF:22:C0
    Motherboard assembly number: 73-5781-12
    Power supply part number: 34-0965-01
    Motherboard serial number: FOC08031XZD
    Power supply serial number: DAB08020NVK
    Model revision number: M0
    Motherboard revision number: B0
    Model number: WS-C2950-24
    System serial number: FOC0803X2VT
    Configuration register is 0xF

    Switch#sh flas
    Switch#sh flash:

    Directory of flash:/

    2 -rwx 269 Jan 01 1970 00:02:12 +00:00 env_vars
    3 -rwx 1258 Mar 08 1993 17:35:33 +00:00
    config.text.renamed
    4 -rwx 5 Mar 08 1993 17:35:33 +00:00
    private-config.text.rename
    d
    5 -rwx 4294 Mar 01 1993 00:09:32 +00:00 home-base.cfg
    7 -rwx 110 Mar 01 1993 00:01:39 +00:00 info
    8 -rwx 3692203 Mar 01 1993 00:26:46 +00:00
    c2950-i6k2l2q4-mz.121-22.E
    A5.bin
    9 drwx 2304 Mar 01 1993 00:04:24 +00:00 html
    84 -rwx 110 Mar 01 1993 00:04:34 +00:00 info.ver

    7741440 bytes total (1742848 bytes free)
    Switch#


    ___________________________________________________________________________
    Switch Two
    ----------------------------

    Switch#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    RELEASE SOFTWAR
    E (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Thu 14-Jul-05 01:10 by antonino
    Image text-base: 0x80010000, data-base: 0x80674000

    ROM: Bootstrap program is C2950 boot loader

    Switch uptime is 10 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"


    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be
    found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email to
    .

    cisco WS-C2950C-24 (RC32300) processor (revision B0) with 19986K bytes
    of memory
    ..
    Processor board ID FAB0550P0TE
    Last reset from system-reset
    Running Enhanced Image
    26 FastEthernet/IEEE 802.3 interface(s)

    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:08:20:FA:C8:C0
    Motherboard assembly number: 73-5750-08
    Motherboard serial number: FAB05497699
    Model revision number: B0
    Model number: WS-C2950C-24
    System serial number: FAB0550P0TE
    Configuration register is 0xF

    Switch# sh flas
    Switch# sh flash:

    Directory of flash:/

    2 -rwx 111 Mar 01 1993 00:24:21 +00:00 info
    4 -rwx 3692203 Mar 01 1993 00:27:04 +00:00
    c2950-i6k2l2q4-mz.121-22.E
    A5.bin
    5 -rwx 4824 Mar 01 1993 01:39:08 +00:00 home-base.cfg
    166 -rwx 267 Mar 01 1993 00:01:32 +00:00 env_vars
    7 drwx 3968 Mar 01 1993 00:30:02 +00:00 html
    362 -rwx 109 Mar 01 1993 00:41:34 +00:00 info.ver

    7741440 bytes total (3126784 bytes free)
    Switch#
     
    VeeDub, Sep 14, 2006
    #1
    1. Advertising

  2. VeeDub

    Guest

    VeeDub wrote:
    > Hi
    >
    > I have the same IOS version in flash on two 2950 switches but a show
    > version output on each shows one as running a Standard Image and the
    > other the Enhanced Image. The output is below. Any ideas why this would
    > be?


    WS-C2950-24 C2950-I6K2L2Q4-M
    flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin

    WS-C2950C-24 C2950-I6K2L2Q4-M
    flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin

    The hardware is different.

    IIRC some hardware "uses" Standard and others Enhanced.
     
    , Sep 14, 2006
    #2
    1. Advertising

  3. VeeDub

    Brian V Guest

    "VeeDub" <> wrote in message
    news:...
    > Hi
    >
    > I have the same IOS version in flash on two 2950 switches but a show
    > version output on each shows one as running a Standard Image and the
    > other the Enhanced Image. The output is below. Any ideas why this would
    > be?
    >
    > Thanks
    >
    >
    > ___________________________________________________________________________
    > SWITCH ONE
    > ------------------------------
    > Switch#sh version
    > Cisco Internetwork Operating System Software
    > IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    > RELEASE SOFTWAR
    > E (fc1)
    > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > Compiled Thu 14-Jul-05 01:10 by antonino
    > Image text-base: 0x80010000, data-base: 0x80674000
    >
    > ROM: Bootstrap program is C2950 boot loader
    >
    > Switch uptime is 7 minutes
    > System returned to ROM by power-on
    > System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"
    >
    >
    > This product contains cryptographic features and is subject to United
    > States and local country laws governing import, export, transfer and
    > use. Delivery of Cisco cryptographic products does not imply
    > third-party authority to import, export, distribute or use encryption.
    > Importers, exporters, distributors and users are responsible for
    > compliance with U.S. and local country laws. By using this product you
    > agree to comply with applicable laws and regulations. If you are unable
    > to comply with U.S. and local laws, return this product immediately.
    >
    > A summary of U.S. laws governing Cisco cryptographic products may be
    > found at:
    > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    >
    > If you require further assistance please contact us by sending email to
    > .
    >
    > cisco WS-C2950-24 (RC32300) processor (revision M0) with 19986K bytes
    > of memory.
    > Processor board ID FOC0803X2VT
    > Last reset from system-reset
    > Running Standard Image
    > 24 FastEthernet/IEEE 802.3 interface(s)
    >
    > 32K bytes of flash-simulated non-volatile configuration memory.
    > Base ethernet MAC Address: 00:0F:23:AF:22:C0
    > Motherboard assembly number: 73-5781-12
    > Power supply part number: 34-0965-01
    > Motherboard serial number: FOC08031XZD
    > Power supply serial number: DAB08020NVK
    > Model revision number: M0
    > Motherboard revision number: B0
    > Model number: WS-C2950-24
    > System serial number: FOC0803X2VT
    > Configuration register is 0xF
    >
    > Switch#sh flas
    > Switch#sh flash:
    >
    > Directory of flash:/
    >
    > 2 -rwx 269 Jan 01 1970 00:02:12 +00:00 env_vars
    > 3 -rwx 1258 Mar 08 1993 17:35:33 +00:00
    > config.text.renamed
    > 4 -rwx 5 Mar 08 1993 17:35:33 +00:00
    > private-config.text.rename
    > d
    > 5 -rwx 4294 Mar 01 1993 00:09:32 +00:00 home-base.cfg
    > 7 -rwx 110 Mar 01 1993 00:01:39 +00:00 info
    > 8 -rwx 3692203 Mar 01 1993 00:26:46 +00:00
    > c2950-i6k2l2q4-mz.121-22.E
    > A5.bin
    > 9 drwx 2304 Mar 01 1993 00:04:24 +00:00 html
    > 84 -rwx 110 Mar 01 1993 00:04:34 +00:00 info.ver
    >
    > 7741440 bytes total (1742848 bytes free)
    > Switch#
    >
    >
    > ___________________________________________________________________________
    > Switch Two
    > ----------------------------
    >
    > Switch#sh ver
    > Cisco Internetwork Operating System Software
    > IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    > RELEASE SOFTWAR
    > E (fc1)
    > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > Compiled Thu 14-Jul-05 01:10 by antonino
    > Image text-base: 0x80010000, data-base: 0x80674000
    >
    > ROM: Bootstrap program is C2950 boot loader
    >
    > Switch uptime is 10 minutes
    > System returned to ROM by power-on
    > System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"
    >
    >
    > This product contains cryptographic features and is subject to United
    > States and local country laws governing import, export, transfer and
    > use. Delivery of Cisco cryptographic products does not imply
    > third-party authority to import, export, distribute or use encryption.
    > Importers, exporters, distributors and users are responsible for
    > compliance with U.S. and local country laws. By using this product you
    > agree to comply with applicable laws and regulations. If you are unable
    > to comply with U.S. and local laws, return this product immediately.
    >
    > A summary of U.S. laws governing Cisco cryptographic products may be
    > found at:
    > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    >
    > If you require further assistance please contact us by sending email to
    > .
    >
    > cisco WS-C2950C-24 (RC32300) processor (revision B0) with 19986K bytes
    > of memory
    > .
    > Processor board ID FAB0550P0TE
    > Last reset from system-reset
    > Running Enhanced Image
    > 26 FastEthernet/IEEE 802.3 interface(s)
    >
    > 32K bytes of flash-simulated non-volatile configuration memory.
    > Base ethernet MAC Address: 00:08:20:FA:C8:C0
    > Motherboard assembly number: 73-5750-08
    > Motherboard serial number: FAB05497699
    > Model revision number: B0
    > Model number: WS-C2950C-24
    > System serial number: FAB0550P0TE
    > Configuration register is 0xF
    >
    > Switch# sh flas
    > Switch# sh flash:
    >
    > Directory of flash:/
    >
    > 2 -rwx 111 Mar 01 1993 00:24:21 +00:00 info
    > 4 -rwx 3692203 Mar 01 1993 00:27:04 +00:00
    > c2950-i6k2l2q4-mz.121-22.E
    > A5.bin
    > 5 -rwx 4824 Mar 01 1993 01:39:08 +00:00 home-base.cfg
    > 166 -rwx 267 Mar 01 1993 00:01:32 +00:00 env_vars
    > 7 drwx 3968 Mar 01 1993 00:30:02 +00:00 html
    > 362 -rwx 109 Mar 01 1993 00:41:34 +00:00 info.ver
    >
    > 7741440 bytes total (3126784 bytes free)
    > Switch#
    >



    You have 2 different model switches. Ones a 2950-24 the other is a 2950C-24.
     
    Brian V, Sep 14, 2006
    #3
  4. VeeDub

    VeeDub Guest

    Thanks

    I knew that one had fibre ports and the other didn't but I presumed
    that this was only a hardware feature and would still allow each of
    them to run the enhanced image if they both had the same IOS installed.
    Seems not, thanks anyway.



    Brian V wrote:
    > "VeeDub" <> wrote in message
    > news:...
    > > Hi
    > >
    > > I have the same IOS version in flash on two 2950 switches but a show
    > > version output on each shows one as running a Standard Image and the
    > > other the Enhanced Image. The output is below. Any ideas why this would
    > > be?
    > >
    > > Thanks
    > >
    > >
    > > ___________________________________________________________________________
    > > SWITCH ONE
    > > ------------------------------
    > > Switch#sh version
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    > > RELEASE SOFTWAR
    > > E (fc1)
    > > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > > Compiled Thu 14-Jul-05 01:10 by antonino
    > > Image text-base: 0x80010000, data-base: 0x80674000
    > >
    > > ROM: Bootstrap program is C2950 boot loader
    > >
    > > Switch uptime is 7 minutes
    > > System returned to ROM by power-on
    > > System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"
    > >
    > >
    > > This product contains cryptographic features and is subject to United
    > > States and local country laws governing import, export, transfer and
    > > use. Delivery of Cisco cryptographic products does not imply
    > > third-party authority to import, export, distribute or use encryption.
    > > Importers, exporters, distributors and users are responsible for
    > > compliance with U.S. and local country laws. By using this product you
    > > agree to comply with applicable laws and regulations. If you are unable
    > > to comply with U.S. and local laws, return this product immediately.
    > >
    > > A summary of U.S. laws governing Cisco cryptographic products may be
    > > found at:
    > > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    > >
    > > If you require further assistance please contact us by sending email to
    > > .
    > >
    > > cisco WS-C2950-24 (RC32300) processor (revision M0) with 19986K bytes
    > > of memory.
    > > Processor board ID FOC0803X2VT
    > > Last reset from system-reset
    > > Running Standard Image
    > > 24 FastEthernet/IEEE 802.3 interface(s)
    > >
    > > 32K bytes of flash-simulated non-volatile configuration memory.
    > > Base ethernet MAC Address: 00:0F:23:AF:22:C0
    > > Motherboard assembly number: 73-5781-12
    > > Power supply part number: 34-0965-01
    > > Motherboard serial number: FOC08031XZD
    > > Power supply serial number: DAB08020NVK
    > > Model revision number: M0
    > > Motherboard revision number: B0
    > > Model number: WS-C2950-24
    > > System serial number: FOC0803X2VT
    > > Configuration register is 0xF
    > >
    > > Switch#sh flas
    > > Switch#sh flash:
    > >
    > > Directory of flash:/
    > >
    > > 2 -rwx 269 Jan 01 1970 00:02:12 +00:00 env_vars
    > > 3 -rwx 1258 Mar 08 1993 17:35:33 +00:00
    > > config.text.renamed
    > > 4 -rwx 5 Mar 08 1993 17:35:33 +00:00
    > > private-config.text.rename
    > > d
    > > 5 -rwx 4294 Mar 01 1993 00:09:32 +00:00 home-base.cfg
    > > 7 -rwx 110 Mar 01 1993 00:01:39 +00:00 info
    > > 8 -rwx 3692203 Mar 01 1993 00:26:46 +00:00
    > > c2950-i6k2l2q4-mz.121-22.E
    > > A5.bin
    > > 9 drwx 2304 Mar 01 1993 00:04:24 +00:00 html
    > > 84 -rwx 110 Mar 01 1993 00:04:34 +00:00 info.ver
    > >
    > > 7741440 bytes total (1742848 bytes free)
    > > Switch#
    > >
    > >
    > > ___________________________________________________________________________
    > > Switch Two
    > > ----------------------------
    > >
    > > Switch#sh ver
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA5,
    > > RELEASE SOFTWAR
    > > E (fc1)
    > > Copyright (c) 1986-2005 by cisco Systems, Inc.
    > > Compiled Thu 14-Jul-05 01:10 by antonino
    > > Image text-base: 0x80010000, data-base: 0x80674000
    > >
    > > ROM: Bootstrap program is C2950 boot loader
    > >
    > > Switch uptime is 10 minutes
    > > System returned to ROM by power-on
    > > System image file is "flash:/c2950-i6k2l2q4-mz.121-22.EA5.bin"
    > >
    > >
    > > This product contains cryptographic features and is subject to United
    > > States and local country laws governing import, export, transfer and
    > > use. Delivery of Cisco cryptographic products does not imply
    > > third-party authority to import, export, distribute or use encryption.
    > > Importers, exporters, distributors and users are responsible for
    > > compliance with U.S. and local country laws. By using this product you
    > > agree to comply with applicable laws and regulations. If you are unable
    > > to comply with U.S. and local laws, return this product immediately.
    > >
    > > A summary of U.S. laws governing Cisco cryptographic products may be
    > > found at:
    > > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    > >
    > > If you require further assistance please contact us by sending email to
    > > .
    > >
    > > cisco WS-C2950C-24 (RC32300) processor (revision B0) with 19986K bytes
    > > of memory
    > > .
    > > Processor board ID FAB0550P0TE
    > > Last reset from system-reset
    > > Running Enhanced Image
    > > 26 FastEthernet/IEEE 802.3 interface(s)
    > >
    > > 32K bytes of flash-simulated non-volatile configuration memory.
    > > Base ethernet MAC Address: 00:08:20:FA:C8:C0
    > > Motherboard assembly number: 73-5750-08
    > > Motherboard serial number: FAB05497699
    > > Model revision number: B0
    > > Model number: WS-C2950C-24
    > > System serial number: FAB0550P0TE
    > > Configuration register is 0xF
    > >
    > > Switch# sh flas
    > > Switch# sh flash:
    > >
    > > Directory of flash:/
    > >
    > > 2 -rwx 111 Mar 01 1993 00:24:21 +00:00 info
    > > 4 -rwx 3692203 Mar 01 1993 00:27:04 +00:00
    > > c2950-i6k2l2q4-mz.121-22.E
    > > A5.bin
    > > 5 -rwx 4824 Mar 01 1993 01:39:08 +00:00 home-base.cfg
    > > 166 -rwx 267 Mar 01 1993 00:01:32 +00:00 env_vars
    > > 7 drwx 3968 Mar 01 1993 00:30:02 +00:00 html
    > > 362 -rwx 109 Mar 01 1993 00:41:34 +00:00 info.ver
    > >
    > > 7741440 bytes total (3126784 bytes free)
    > > Switch#
    > >

    >
    >
    > You have 2 different model switches. Ones a 2950-24 the other is a 2950C-24.
     
    VeeDub, Sep 15, 2006
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Michiel van der Kraats

    Cisco 2950 with Standard image and Access Lists

    Michiel van der Kraats, Sep 7, 2005, in forum: Cisco
    Replies:
    0
    Views:
    476
    Michiel van der Kraats
    Sep 7, 2005
  2. Stohon
    Replies:
    6
    Views:
    6,675
    Peter
    Mar 15, 2006
  3. Tacobell
    Replies:
    5
    Views:
    4,473
  4. Neddy
    Replies:
    8
    Views:
    1,729
    Doug McIntyre
    May 27, 2009
  5. Neddy
    Replies:
    5
    Views:
    5,434
    waltjones40
    May 27, 2011
Loading...

Share This Page