Cannot Access with Cisco PIX 501 & Cable modem

Discussion in 'Hardware' started by nazmul, Jun 10, 2007.

  1. nazmul

    nazmul

    Joined:
    Jun 10, 2007
    Messages:
    1
    Hi,
    I have a cisco pix 501, which is currently set to factory default settings apart from, the ip address and DHCP server range and telnet access.

    I have cable dsl modem for which i am trying to configure the pix to access the internet.

    The outside interface link is up but the ip address is "DHCP Address" should this not be the wan IP address?

    below is the config of the PIX:

    PIX Version 6.3(5)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password 7IrNX8dFTR.xv/WA encrypted
    passwd 7IrNX8dFTR.xv/WA encrypted
    hostname pixfirewall
    domain-name ciscopix.com
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside dhcp setroute
    ip address inside 192.168.10.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm location 192.168.10.0 255.255.255.255 inside
    pdm logging informational 100
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    timeout xlate 0:05:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout sip-disconnect 0:02:00 sip-invite 0:03:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    http server enable
    http 192.168.10.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet 192.168.10.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd address 192.168.10.3-192.168.10.34 inside
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd auto_config outside
    dhcpd enable inside
    terminal width 80

    please can someone show me the way thanks

    nazmul
     
    nazmul, Jun 10, 2007
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Warren Turner
    Replies:
    0
    Views:
    2,170
    Warren Turner
    Jan 9, 2004
  2. Andre
    Replies:
    7
    Views:
    743
    Andre
    Feb 20, 2005
  3. youpet2000@yahoo.com
    Replies:
    1
    Views:
    1,420
    Walter Roberson
    Mar 6, 2005
  4. tractng@gmail.com
    Replies:
    3
    Views:
    641
    tractng@gmail.com
    Jun 6, 2005
  5. Chris
    Replies:
    0
    Views:
    1,810
    Chris
    Jun 4, 2006
Loading...

Share This Page