can I have 10.x and 192.x on same port ?

Discussion in 'Cisco' started by ps56k, Feb 20, 2014.

  1. ps56k

    ps56k Guest

    academic discussion... with an old router - like 1600 -

    Could I bring a local 10.x defined network segment
    and a 192.x defined network segment
    onto the same physical port of the 1600

    ie -
    combine the switch output from the 10.x network and
    the switch output from the 192.x network ??

    --
    / _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
    No Good Deed -
    Goes Unpunished
     
    ps56k, Feb 20, 2014
    #1
    1. Advertising

  2. ps56k <> wrote:

    > academic discussion... with an old router - like 1600 -
    >
    > Could I bring a local 10.x defined network segment
    > and a 192.x defined network segment
    > onto the same physical port of the 1600
    >
    > ie -
    > combine the switch output from the 10.x network and
    > the switch output from the 192.x network ??

    interface blah
    ip address 192.168.1.1 255.255.255.0
    ip address 10.0.0.1 255.255.0.0 secondary

    --maarten
     
    Maarten Carels, Feb 21, 2014
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. swsw
    Replies:
    3
    Views:
    1,459
    Walter Roberson
    Jul 28, 2005
  2. =?Utf-8?B?ZGVyZWt1bA==?=

    DefaultIPGateway = 192.168.1.1(Same Subnet) (FAILED)

    =?Utf-8?B?ZGVyZWt1bA==?=, Aug 17, 2006, in forum: Wireless Networking
    Replies:
    2
    Views:
    5,226
    Frankster
    Aug 17, 2006
  3. Scooty
    Replies:
    0
    Views:
    1,705
    Scooty
    Mar 8, 2007
  4. Gordon
    Replies:
    5
    Views:
    413
  5. Jack \(MVP-Networking\).
    Replies:
    7
    Views:
    453
    James Egan
    Jun 24, 2008
Loading...

Share This Page