Burn process failed - help! Log file posted for help troubleshooting

Discussion in 'DVD Video' started by Michael Mason, Aug 16, 2004.

  1. Hi everyone,

    I had no trouble at all burning for about a month. Then all of
    a sudden, I had the odd problem completing a burn process,
    but I dismissed that as being a media problem. I just acquired
    some higher quality DVD-Rs and the same thing happened again.

    Could someone look at this log file and tell me what happened
    and what I might do to fix it? I've tried re-doing what successfully
    completed in the past and that doesn't work at this point. Any
    tips appreciated.

    Mike


    1A20-0101-0030-1265-1741-3662

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
    Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
    6.3.1.17
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0
    DMA: On
    CdRomPeripheral : ATAPI CD-ROM DRIVE-40X atapi Port 0 ID 1
    DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
    DMA: On
    CdRomPeripheral : AOpen DVD-1040 PRO atapi Port 1 ID 1
    DMA: Off

    === CDRom-Device-Map ===
    ATAPI CD-ROM DRIVE-40X D: CDRom0
    HL-DT-ST DVDRAM GSA-4081 E: CDRom1
    AOpen DVD-1040 PRO F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 49283072 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 319MB (327220kB)
    Free physical memory: 92MB (94692kB)
    Memory in use : 71 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)

    16.8.2004
    NeroAPI
    3:31:57 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    3:31:57 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    3:31:57 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    3:31:57 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    3:31:57 PM #5 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4081B running

    3:31:57 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    3:31:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    3:31:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    3:31:58 PM #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-At-Once, using DVD media

    3:31:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    3:31:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    3:31:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
    Disc Manufacturer: Prodis - cS03
    Disc Application Code: 64, Disc Physical Code: 193

    3:31:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<

    =========================================

    3:31:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no
    patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
    2286128 blocks [HL-DT-ST DVDRAM GSA-4081B]
    --------------------------------------------------------------

    3:31:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
    4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    3:31:58 PM #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    3:31:58 PM #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    3:31:58 PM #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    3:31:58 PM #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    3:31:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
    orig at #0): write at #0

    3:31:59 PM #21 Text 0 File DVDR.cpp, Line 1879
    Recording mode: Sequential Recording Mode

    3:31:59 PM #22 Text 0 File Mmc.cpp, Line 20401
    Set BUFE: supported -> ON

    3:31:59 PM #23 Text 0 File DVDR.cpp, Line 2020
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:31:59 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
    Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
    DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:32:11 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
    15:32:11.477 - HL-DT-ST DVDRAM GSA-4081B\H1 T0 : Queue again later

    3:45:06 PM #26 SCSI -1039 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BD0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x01
    CDB Data: 0x2A 0x00 0x00 0x1F 0x22 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    0x32 0x34 0x04 0x0C 0x09 0x01

    3:45:06 PM #27 CDR -1039 File Writer.cpp, Line 304
    Focus or tracking error

    3:45:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:45:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    3:45:06 PM #30 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was 2040447

    3:45:06 PM #31 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    3:45:06 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    3:45:06 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
    0 (Security Option)
     
    Michael Mason, Aug 16, 2004
    #1
    1. Advertising

  2. Just a follow-up - "Focus or tracking error" seems to be the
    key point. I can't seem to go much beyond that as far as figuring
    out a solution but that's the only 'glitch' I can see in this log file
    at all. Followups appreciated of course!

    "Michael Mason" <> wrote in message
    news:...
    > Hi everyone,
    >
    > I had no trouble at all burning for about a month. Then all of
    > a sudden, I had the odd problem completing a burn process,
    > but I dismissed that as being a media problem. I just acquired
    > some higher quality DVD-Rs and the same thing happened again.
    >
    > Could someone look at this log file and tell me what happened
    > and what I might do to fix it? I've tried re-doing what successfully
    > completed in the past and that doesn't work at this point. Any
    > tips appreciated.
    >
    > Mike
    >
    >
    > 1A20-0101-0030-1265-1741-3662
    >
    > Windows XP 5.1
    > IA32
    > WinAspi: -
    > ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
    > Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    > Nero API version: 6.3.1.17
    > Using interface version: 6.3.1.4
    > Installed in: C:\Program Files\Ahead\Nero\
    > Application: ahead\Nero - Burning Rom
    > Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA

    0 -
    > 6.3.1.17
    > Adapter driver: <atapi> HA 1
    > Drive buffer : 2048kB
    > Bus Type : default (0) -> ATAPI, detected: ATAPI
    >
    > === Scsi-Device-Map ===
    > DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0
    > DMA: On
    > CdRomPeripheral : ATAPI CD-ROM DRIVE-40X atapi Port 0 ID 1
    > DMA: Off
    > CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
    > DMA: On
    > CdRomPeripheral : AOpen DVD-1040 PRO atapi Port 1 ID 1
    > DMA: Off
    >
    > === CDRom-Device-Map ===
    > ATAPI CD-ROM DRIVE-40X D: CDRom0
    > HL-DT-ST DVDRAM GSA-4081 E: CDRom1
    > AOpen DVD-1040 PRO F: CDRom2
    > =======================
    >
    > AutoRun : 1
    > Excluded drive IDs:
    > WriteBufferSize: 49283072 (0) Byte
    > ShowDrvBufStat : 0
    > BUFE : 0
    > Physical memory : 319MB (327220kB)
    > Free physical memory: 92MB (94692kB)
    > Memory in use : 71 %
    > Uncached PFiles: 0x0
    > Use Static Write Speed Table: 0
    > Use Inquiry : 1
    > Global Bus Type: default (0)
    > Check supported media : Enabled (1)
    >
    > 16.8.2004
    > NeroAPI
    > 3:31:57 PM #1 Phase 112 File APIProgress.cpp, Line 273
    > DVD-Video files reallocation started
    >
    > 3:31:57 PM #2 Phase 114 File APIProgress.cpp, Line 273
    > DVD-Video files reallocation completed (no file modified)
    >
    > 3:31:57 PM #3 Phase 111 File APIProgress.cpp, Line 273
    > DVD-Video files sorted
    >
    > 3:31:57 PM #4 Text 0 File Reader.cpp, Line 118
    > Reader running
    >
    > 3:31:57 PM #5 Text 0 File Writer.cpp, Line 124
    > Writer HL-DT-ST DVDRAM GSA-4081B running
    >
    > 3:31:57 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    > DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    > DRM: Beginning burn process.
    >
    > 3:31:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    > First writeable address = 0 (0x00000000)
    >
    > 3:31:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    > First writeable address = 0 (0x00000000)
    >
    > 3:31:58 PM #9 Text 0 File Burncd.cpp, Line 3172
    > Turn on Disc-At-Once, using DVD media
    >
    > 3:31:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    > Last possible write address on media: 2298495 (510:46.45, 4489MB)
    > Last address to be written: 2286127 (508:01.52, 4465MB)
    >
    > 3:31:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
    > Write in overburning mode: NO
    >
    > 3:31:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
    > Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
    > Disc Manufacturer: Prodis - cS03
    > Disc Application Code: 64, Disc Physical Code: 193
    >
    > 3:31:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
    > >>> Protocol of DlgWaitCD activities: <<<

    > =========================================
    >
    > 3:31:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    > Setup items (after recorder preparation)
    > 0: TRM_DATA_MODE1 (CTransferItem)
    > 2 indices, index0 (150) not provided
    > original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    > relocatable, disc pos for caching/writing not required/required, no
    > patch infos
    > -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
    > 2286128 blocks [HL-DT-ST DVDRAM GSA-4081B]
    > --------------------------------------------------------------
    >
    > 3:31:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    > Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
    > DAO infos:
    > ==========
    > MCN: ""
    > TOCType: 0x00; Session Closed, disc fixated
    > Tracks 1 to 1:
    > 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
    > 4681990144, ISRC ""
    > DAO layout:
    > ===========
    > __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    > 0 | lead-in | 0 | 0x00 | 0x41
    > 0 | 1 | 0 | 0x00 | 0x41
    > 0 | 1 | 1 | 0x00 | 0x41
    > 2286128 | lead-out | 1 | 0x00 | 0x41
    >
    > 3:31:58 PM #16 Phase 24 File APIProgress.cpp, Line 273
    > Caching of files started
    >
    > 3:31:58 PM #17 Text 0 File Burncd.cpp, Line 4182
    > Cache writing successful.
    >
    > 3:31:58 PM #18 Phase 25 File APIProgress.cpp, Line 273
    > Caching of files completed
    >
    > 3:31:58 PM #19 Phase 36 File APIProgress.cpp, Line 273
    > Burn process started at 4x (5,540 KB/s)
    >
    > 3:31:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    > Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
    > orig at #0): write at #0
    >
    > 3:31:59 PM #21 Text 0 File DVDR.cpp, Line 1879
    > Recording mode: Sequential Recording Mode
    >
    > 3:31:59 PM #22 Text 0 File Mmc.cpp, Line 20401
    > Set BUFE: supported -> ON
    >
    > 3:31:59 PM #23 Text 0 File DVDR.cpp, Line 2020
    > Start write address at LBA 0
    > DVD high compatibility mode: Yes
    >
    > 3:31:59 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
    > ---- DVD Structure: Physical Format Information (00h) ----
    > Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    > Book Type: DVD-R (2), Part Version: 5
    > Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    > Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
    > Type: recordable
    > Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    > Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,

    DVD-R/-RW,
    > DVD+R/+RW)
    > End Physical Sector Number of Data Area: 26127F h
    > End Sector Number in Layer 0: 0 h
    > Data in Burst Cutting Area (BCA) does not exist
    > Start sector number of the current Border-Out: 2FE10 h
    > Start sector number of the next Border-In: 2FFA0 h
    > Media Specific [16..63]:
    > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

    .................
    > 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00

    .................
    > 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

    .................
    >
    > 3:32:11 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
    > 15:32:11.477 - HL-DT-ST DVDRAM GSA-4081B\H1 T0 : Queue again later
    >
    > 3:45:06 PM #26 SCSI -1039 File Cdrdrv.cpp, Line 1442
    > SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BD0000
    > Status: 0x04 (0x01, SCSI_ERR)
    > HA-Status 0x00 (0x00, OK)
    > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    > Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    > Sense Code: 0x09
    > Sense Qual: 0x01
    > CDB Data: 0x2A 0x00 0x00 0x1F 0x22 0x80 0x00 0x00 0x20 0x00 0x00 0x00
    > Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
    > 0x32 0x34 0x04 0x0C 0x09 0x01
    >
    > 3:45:06 PM #27 CDR -1039 File Writer.cpp, Line 304
    > Focus or tracking error
    >
    > 3:45:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
    > all writers idle, stopping conversion
    >
    > 3:45:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
    > conversion idle, stopping reader
    >
    > 3:45:06 PM #30 Text 0 File DVDR.cpp, Line 2256
    > EndDAO: Last written address was 2040447
    >
    > 3:45:06 PM #31 Phase 38 File APIProgress.cpp, Line 273
    > Burn process failed at 4x (5,540 KB/s)
    >
    > 3:45:06 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
    > DRM: DRM burn session terminated.
    >
    > 3:45:06 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
    > DRM: Closing entire DRM handling. Bye.
    >
    >
    > Existing drivers:
    >
    > Registry Keys:
    > HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs

    :
    > 0 (Security Option)
    >
    >
    >
    >
     
    Michael Mason, Aug 16, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Phisherman
    Replies:
    1
    Views:
    946
    Phisherman
    Oct 8, 2006
  2. Fu Schnickens

    Changing file from User Process to System process

    Fu Schnickens, Dec 28, 2006, in forum: Computer Support
    Replies:
    3
    Views:
    526
    Plato
    Dec 30, 2006
  3. AnonGoo
    Replies:
    1
    Views:
    383
  4. Pieter
    Replies:
    11
    Views:
    2,090
    Pieter
    Jun 12, 2005
  5. Giuen
    Replies:
    0
    Views:
    1,251
    Giuen
    Sep 12, 2008
Loading...

Share This Page