Bottom-end question.. where to find Aironet drivers

Discussion in 'Cisco' started by David Lesher, Sep 8, 2006.

  1. David Lesher

    David Lesher Guest

    I'm in need of the OSX drivers for the cisco 350 Cardbus cards.

    I found the MACOSInstallv30 package, but it lacks WPA. I see talk
    about the 350 running WPA, so I'm guessing there is a later package
    than 3.0 that offers it...true?

    Every link I chased down ended up pointing to a subscription-only
    cisco page.
    --
    A host is a host from coast to
    & no one will talk to a host that's close........[v].(301) 56-LINUX
    Unless the host (that isn't close).........................pob 1433
    is busy, hung or dead....................................20915-1433
    David Lesher, Sep 8, 2006
    #1
    1. Advertising

  2. David Lesher

    James Guest

    Have you tried creating an account on Cisco's website and logging in?
    If after logging in it won't let you donwload the drivers from the link
    below then I would suggest speaking to the re-seller you purchased the
    cards from, they may be able to get the drivers for you.

    I can't imagine that Cisco would charge for NIC drivers, but then
    again...................

    http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless

    David Lesher wrote:
    > I'm in need of the OSX drivers for the cisco 350 Cardbus cards.
    >
    > I found the MACOSInstallv30 package, but it lacks WPA. I see talk
    > about the 350 running WPA, so I'm guessing there is a later package
    > than 3.0 that offers it...true?
    >
    > Every link I chased down ended up pointing to a subscription-only
    > cisco page.
    > --
    > A host is a host from coast to
    > & no one will talk to a host that's close........[v].(301) 56-LINUX
    > Unless the host (that isn't close).........................pob 1433
    > is busy, hung or dead....................................20915-1433
    James, Sep 8, 2006
    #2
    1. Advertising

  3. David Lesher

    David Lesher Guest

    "James" <> writes:

    >Have you tried creating an account on Cisco's website and logging in?


    Doh... well I have now...

    I'd assumed that I had to have a support contract to get a "CCO"
    account from what a friend and ex-Cisco VAR told me..

    So I grabbed things, but it looks like no joy. Amazingly, the latest
    flash for the 350 cards is ONLY if you run Windoze. {Not just the
    drivers..} And it appears that's where WPA comes on board.

    Too bad; they are nice cards..



    --
    A host is a host from coast to
    & no one will talk to a host that's close........[v].(301) 56-LINUX
    Unless the host (that isn't close).........................pob 1433
    is busy, hung or dead....................................20915-1433
    David Lesher, Sep 9, 2006
    #3
  4. David Lesher

    James Guest

    Anyone can get a CCO account, when you get a support contract you are
    given a code which unlocks certain parts of the site.

    James

    David Lesher wrote:
    > "James" <> writes:
    >
    > >Have you tried creating an account on Cisco's website and logging in?

    >
    > Doh... well I have now...
    >
    > I'd assumed that I had to have a support contract to get a "CCO"
    > account from what a friend and ex-Cisco VAR told me..
    >
    > So I grabbed things, but it looks like no joy. Amazingly, the latest
    > flash for the 350 cards is ONLY if you run Windoze. {Not just the
    > drivers..} And it appears that's where WPA comes on board.
    >
    > Too bad; they are nice cards..
    >
    >
    >
    > --
    > A host is a host from coast to
    > & no one will talk to a host that's close........[v].(301) 56-LINUX
    > Unless the host (that isn't close).........................pob 1433
    > is busy, hung or dead....................................20915-1433
    James, Sep 11, 2006
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. ike lozada
    Replies:
    0
    Views:
    529
    ike lozada
    May 27, 2004
  2. Dave

    Measure delay end-to-end

    Dave, Jul 19, 2004, in forum: Cisco
    Replies:
    1
    Views:
    577
  3. ec
    Replies:
    3
    Views:
    2,735
    shinobi
    Jul 25, 2006
  4. Andre Paetzold

    Aironet 1200 and Aironet 1300 compatible?

    Andre Paetzold, Dec 8, 2004, in forum: Cisco
    Replies:
    2
    Views:
    858
    Andre Paetzold
    Dec 9, 2004
  5. Sven Juergensen

    aironet <-> aironet bridging?

    Sven Juergensen, Dec 15, 2004, in forum: Cisco
    Replies:
    1
    Views:
    450
    Walter Roberson
    Dec 16, 2004
Loading...

Share This Page