boot of "cisco2-C1600" using boot helper "eprom:c1600-boot-r.111-10.AA" failed

Discussion in 'Cisco' started by Pete.Rudolph@gmail.com, Jun 9, 2007.

  1. Guest

    Hi,

    I'm new to cisco and bought some old routers off ebay. Everything was
    going well and maybe I got a little too keen and I ended up deleting
    my flash card. Now I can't get the ios to work as it was before as I
    don't have a copy of what it came with and don't have a cisco account
    to redownload it.

    I found some 1600 ios' online but it doesn't seem to work, what am I
    doing wrong.

    06/09/2007 02:28 PM 4,444,305 c1600-osy56i-mz.121-1.T.bin
    06/09/2007 02:28 PM 5,396,572 c1600-oy-l.120-9.bin
    06/09/2007 02:28 PM 7,162,548 c1600-y-l.122-2.T.bin

    I've tried these but no go, anyone now where I would find what I'm
    looking for or tell me what I'm doing wrong?

    Thanks,

    Peter

    Here's what I typed after things went wrong.

    ena
    Password:
    1600(boot)#conf term
    Enter configuration commands, one per line. End with CNTL/Z.
    1600(boot)(config)#boot system tftp jo.bo in 192.168.15.150
    1600(boot)(config)#boot syste, m flash
    1600(boot)(config)#^Z
    1600(boot)#
    *Mar 1 00:08:10.180: %SYS-5-CONFIG_I: Configured from console by
    consolecopy running startup
    Building configuration...
    [OK]
    1600(boot)#reload
    Proceed with reload? [confirm]

    *Mar 1 00:08:33.444: %SYS-5-RELOAD: Reload requested


    System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1997 by cisco Systems, Inc.
    C1600 processor with 18432 Kbytes of main memory


    program load complete, entry point: 0x4018060, size: 0x1e1568


    %SYS-3-CPUHOG: Task ran for 2256 msec (95/95), Process = Boot Load, PC
    = 4100806
    -Traceback= 40CA51E 40CAFD8 40C8AC8 40180E0 40005B0 4015AAE 401517A
    4014D9C 40023D0 4002E9E 40154FE 4001FC0 400C41EFlash boot: No bootable
    files found in flash.

    Loading jo.bin from 192.168.15.150 (via
    Ethernet0): !!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    [OK - 4444305/17704022 bytes]
    boot of "cisco2-C1600" using boot helper "eprom:c1600-boot-r.
    111-10.AA" failed

    error returned: File boot failed -- File not accessible

    loadprog: error - on file open

    boot: cannot load "cisco2-C1600"Ê


    System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1997 by cisco Systems, Inc.
    C1600 processor with 18432 Kbytes of main memory


    loadprog: bad file magic number: 0x0

    boot: cannot load "flash:"Ê


    System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    SOFTWARE (fc1)
    Copyright (c) 1997 by cisco Systems, Inc.
    C1600 processor with 18432 Kbytes of main memory


    program load complete, entry point: 0x4018060, size: 0x1e1568


    Restricted Rights Legend

    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.

    cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706



    Cisco Internetwork Operating System Software
    IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    DEPLOYMENT RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-1997 by cisco Systems, Inc.
    Compiled Tue 18-Mar-97 14:01 by ccai
    Image text-base: 0x04018060, data-base: 0x02005000

    cisco 1601 (68360) processor (revision C) with 17920K/512K bytes of
    memory.
    Processor board ID 12819636
    X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
    1 Ethernet/IEEE 802.3 interface.
    1 Serial(sync/async) network interface.
    System/IO memory with parity disabled
    8K bytes of non-volatile configuration memory.
    8192K bytes of processor board PCMCIA flash (Read/Write)
    


    Press RETURN to get started!


    *Mar 1 00:00:11.833: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    Ethernet0, changed state to up
    *Mar 1 00:00:11.837: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    Serial0, changed state to down
    *Mar 1 00:00:12.063: %LINK-3-UPDOWN: Interface Ethernet0, changed
    state to up
    *Mar 1 00:00:12.297: %LINK-3-UPDOWN: Interface Serial0, changed state
    to down
    *Mar 1 00:00:12.940: %SYS-5-CONFIG_I: Configured from memory by
    console
    *Mar 1 00:00:12.952: %SYS-5-RESTART: System restarted --
    Cisco Internetwork Operating System Software
    IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    DEPLOYMENT RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-1997 by cisco Systems, Inc.
    Compiled Tue 18-Mar-97 14:01 by ccaiWelcome to the 1600 router wow me
    this works

    User Access Verification

    Password: This is a test
    1600(boot)>\
     
    , Jun 9, 2007
    #1
    1. Advertising

  2. Guest

    Please ignore this now. I downloaded the ios again and everything is
    well. I assume the first three I downloaded were corrupt?

    Thanks

    On Jun 9, 3:56 pm, wrote:
    > Hi,
    >
    > I'm new to cisco and bought some old routers off ebay. Everything was
    > going well and maybe I got a little too keen and I ended up deleting
    > my flash card. Now I can't get the ios to work as it was before as I
    > don't have a copy of what it came with and don't have a cisco account
    > to redownload it.
    >
    > I found some 1600 ios' online but it doesn't seem to work, what am I
    > doing wrong.
    >
    > 06/09/2007 02:28 PM 4,444,305 c1600-osy56i-mz.121-1.T.bin
    > 06/09/2007 02:28 PM 5,396,572 c1600-oy-l.120-9.bin
    > 06/09/2007 02:28 PM 7,162,548 c1600-y-l.122-2.T.bin
    >
    > I've tried these but no go, anyone now where I would find what I'm
    > looking for or tell me what I'm doing wrong?
    >
    > Thanks,
    >
    > Peter
    >
    > Here's what I typed after things went wrong.
    >
    > ena
    > Password:
    > 1600(boot)#conf term
    > Enter configuration commands, one per line. End with CNTL/Z.
    > 1600(boot)(config)#boot system tftp jo.bo in 192.168.15.150
    > 1600(boot)(config)#boot syste, m flash
    > 1600(boot)(config)#^Z
    > 1600(boot)#
    > *Mar 1 00:08:10.180: %SYS-5-CONFIG_I: Configured from console by
    > consolecopy running startup
    > Building configuration...
    > [OK]
    > 1600(boot)#reload
    > Proceed with reload? [confirm]
    >
    > *Mar 1 00:08:33.444: %SYS-5-RELOAD: Reload requested
    >
    > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > SOFTWARE (fc1)
    > Copyright (c) 1997 by cisco Systems, Inc.
    > C1600 processor with 18432 Kbytes of main memory
    >
    > program load complete, entry point: 0x4018060, size: 0x1e1568
    >
    > %SYS-3-CPUHOG: Task ran for 2256 msec (95/95), Process = Boot Load, PC
    > = 4100806
    > -Traceback= 40CA51E 40CAFD8 40C8AC8 40180E0 40005B0 4015AAE 401517A
    > 4014D9C 40023D0 4002E9E 40154FE 4001FC0 400C41EFlash boot: No bootable
    > files found in flash.
    >
    > Loading jo.bin from 192.168.15.150 (via
    > Ethernet0): !!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > [OK - 4444305/17704022 bytes]
    > boot of "cisco2-C1600" using boot helper "eprom:c1600-boot-r.
    > 111-10.AA" failed
    >
    > error returned: File boot failed -- File not accessible
    >
    > loadprog: error - on file open
    >
    > boot: cannot load "cisco2-C1600"Ê
    >
    > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > SOFTWARE (fc1)
    > Copyright (c) 1997 by cisco Systems, Inc.
    > C1600 processor with 18432 Kbytes of main memory
    >
    > loadprog: bad file magic number: 0x0
    >
    > boot: cannot load "flash:"Ê
    >
    > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > SOFTWARE (fc1)
    > Copyright (c) 1997 by cisco Systems, Inc.
    > C1600 processor with 18432 Kbytes of main memory
    >
    > program load complete, entry point: 0x4018060, size: 0x1e1568
    >
    > Restricted Rights Legend
    >
    > Use, duplication, or disclosure by the Government is
    > subject to restrictions as set forth in subparagraph
    > (c) of the Commercial Computer Software - Restricted
    > Rights clause at FAR sec. 52.227-19 and subparagraph
    > (c) (1) (ii) of the Rights in Technical Data and Computer
    > Software clause at DFARS sec. 252.227-7013.
    >
    > cisco Systems, Inc.
    > 170 West Tasman Drive
    > San Jose, California 95134-1706
    >
    > Cisco Internetwork Operating System Software
    > IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > Copyright (c) 1986-1997 by cisco Systems, Inc.
    > Compiled Tue 18-Mar-97 14:01 by ccai
    > Image text-base: 0x04018060, data-base: 0x02005000
    >
    > cisco 1601 (68360) processor (revision C) with 17920K/512K bytes of
    > memory.
    > Processor board ID 12819636
    > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
    > 1 Ethernet/IEEE 802.3 interface.
    > 1 Serial(sync/async) network interface.
    > System/IO memory with parity disabled
    > 8K bytes of non-volatile configuration memory.
    > 8192K bytes of processor board PCMCIA flash (Read/Write)
    >
    > Press RETURN to get started!
    >
    > *Mar 1 00:00:11.833: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    > Ethernet0, changed state to up
    > *Mar 1 00:00:11.837: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    > Serial0, changed state to down
    > *Mar 1 00:00:12.063: %LINK-3-UPDOWN: Interface Ethernet0, changed
    > state to up
    > *Mar 1 00:00:12.297: %LINK-3-UPDOWN: Interface Serial0, changed state
    > to down
    > *Mar 1 00:00:12.940: %SYS-5-CONFIG_I: Configured from memory by
    > console
    > *Mar 1 00:00:12.952: %SYS-5-RESTART: System restarted --
    > Cisco Internetwork Operating System Software
    > IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > Copyright (c) 1986-1997 by cisco Systems, Inc.
    > Compiled Tue 18-Mar-97 14:01 by ccaiWelcome to the 1600 router wow me
    > this works
    >
    > User Access Verification
    >
    > Password: This is a test
    > 1600(boot)>\
     
    , Jun 10, 2007
    #2
    1. Advertising

  3. CC Guest

    On Jun 10, 9:29 am, wrote:
    > Please ignore this now. I downloaded the ios again and everything is
    > well. I assume the first three I downloaded were corrupt?
    >
    > Thanks
    >
    > On Jun 9, 3:56 pm, wrote:
    >
    > > Hi,

    >
    > > I'm new to cisco and bought some old routers off ebay. Everything was
    > > going well and maybe I got a little too keen and I ended up deleting
    > > my flash card. Now I can't get the ios to work as it was before as I
    > > don't have a copy of what it came with and don't have a cisco account
    > > to redownload it.

    >
    > > I found some 1600 ios' online but it doesn't seem to work, what am I
    > > doing wrong.

    >
    > > 06/09/2007 02:28 PM 4,444,305 c1600-osy56i-mz.121-1.T.bin
    > > 06/09/2007 02:28 PM 5,396,572 c1600-oy-l.120-9.bin
    > > 06/09/2007 02:28 PM 7,162,548 c1600-y-l.122-2.T.bin

    >
    > > I've tried these but no go, anyone now where I would find what I'm
    > > looking for or tell me what I'm doing wrong?

    >
    > > Thanks,

    >
    > > Peter

    >
    > > Here's what I typed after things went wrong.

    >
    > > ena
    > > Password:
    > > 1600(boot)#conf term
    > > Enter configuration commands, one per line. End with CNTL/Z.
    > > 1600(boot)(config)#boot system tftp jo.bo in 192.168.15.150
    > > 1600(boot)(config)#boot syste, m flash
    > > 1600(boot)(config)#^Z
    > > 1600(boot)#
    > > *Mar 1 00:08:10.180: %SYS-5-CONFIG_I: Configured from console by
    > > consolecopy running startup
    > > Building configuration...
    > > [OK]
    > > 1600(boot)#reload
    > > Proceed with reload? [confirm]

    >
    > > *Mar 1 00:08:33.444: %SYS-5-RELOAD: Reload requested

    >
    > > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > > SOFTWARE (fc1)
    > > Copyright (c) 1997 by cisco Systems, Inc.
    > > C1600 processor with 18432 Kbytes of main memory

    >
    > > program load complete, entry point: 0x4018060, size: 0x1e1568

    >
    > > %SYS-3-CPUHOG: Task ran for 2256 msec (95/95), Process = Boot Load, PC
    > > = 4100806
    > > -Traceback= 40CA51E 40CAFD8 40C8AC8 40180E0 40005B0 4015AAE 401517A
    > > 4014D9C 40023D0 4002E9E 40154FE 4001FC0 400C41EFlash boot: No bootable
    > > files found in flash.

    >
    > > Loading jo.bin from 192.168.15.150 (via
    > > Ethernet0): !!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > > [OK - 4444305/17704022 bytes]
    > > boot of "cisco2-C1600" using boot helper "eprom:c1600-boot-r.
    > > 111-10.AA" failed

    >
    > > error returned: File boot failed -- File not accessible

    >
    > > loadprog: error - on file open

    >
    > > boot: cannot load "cisco2-C1600"Ê

    >
    > > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > > SOFTWARE (fc1)
    > > Copyright (c) 1997 by cisco Systems, Inc.
    > > C1600 processor with 18432 Kbytes of main memory

    >
    > > loadprog: bad file magic number: 0x0

    >
    > > boot: cannot load "flash:"Ê

    >
    > > System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
    > > SOFTWARE (fc1)
    > > Copyright (c) 1997 by cisco Systems, Inc.
    > > C1600 processor with 18432 Kbytes of main memory

    >
    > > program load complete, entry point: 0x4018060, size: 0x1e1568

    >
    > > Restricted Rights Legend

    >
    > > Use, duplication, or disclosure by the Government is
    > > subject to restrictions as set forth in subparagraph
    > > (c) of the Commercial Computer Software - Restricted
    > > Rights clause at FAR sec. 52.227-19 and subparagraph
    > > (c) (1) (ii) of the Rights in Technical Data and Computer
    > > Software clause at DFARS sec. 252.227-7013.

    >
    > > cisco Systems, Inc.
    > > 170 West Tasman Drive
    > > San Jose, California 95134-1706

    >
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    > > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > > Copyright (c) 1986-1997 by cisco Systems, Inc.
    > > Compiled Tue 18-Mar-97 14:01 by ccai
    > > Image text-base: 0x04018060, data-base: 0x02005000

    >
    > > cisco 1601 (68360) processor (revision C) with 17920K/512K bytes of
    > > memory.
    > > Processor board ID 12819636
    > > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
    > > 1 Ethernet/IEEE 802.3 interface.
    > > 1 Serial(sync/async) network interface.
    > > System/IO memory with parity disabled
    > > 8K bytes of non-volatile configuration memory.
    > > 8192K bytes of processor board PCMCIA flash (Read/Write)

    >
    > > Press RETURN to get started!

    >
    > > *Mar 1 00:00:11.833: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    > > Ethernet0, changed state to up
    > > *Mar 1 00:00:11.837: %LINEPROTO-5-UPDOWN: Line protocol on Interface
    > > Serial0, changed state to down
    > > *Mar 1 00:00:12.063: %LINK-3-UPDOWN: Interface Ethernet0, changed
    > > state to up
    > > *Mar 1 00:00:12.297: %LINK-3-UPDOWN: Interface Serial0, changed state
    > > to down
    > > *Mar 1 00:00:12.940: %SYS-5-CONFIG_I: Configured from memory by
    > > console
    > > *Mar 1 00:00:12.952: %SYS-5-RESTART: System restarted --
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY
    > > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > > Copyright (c) 1986-1997 by cisco Systems, Inc.
    > > Compiled Tue 18-Mar-97 14:01 by ccaiWelcome to the 1600 router wow me
    > > this works

    >
    > > User Access Verification

    >
    > > Password: This is a test
    > > 1600(boot)>\


    How much did you pay for the second hand router ?

    Rgds.
     
    CC, Jun 14, 2007
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Tendril

    helper applications

    Tendril, Oct 19, 2003, in forum: Firefox
    Replies:
    1
    Views:
    608
    dantu
    Oct 21, 2003
  2. kimcheeman

    How do I "hook up" helper apps?

    kimcheeman, Apr 16, 2005, in forum: Firefox
    Replies:
    10
    Views:
    1,034
    Moz Champion
    Apr 18, 2005
  3. Hiawatha Bray

    Where are my Firefox helper apps?

    Hiawatha Bray, Jul 6, 2005, in forum: Firefox
    Replies:
    2
    Views:
    8,835
    Moz Champion
    Jul 7, 2005
  4. ashley
    Replies:
    2
    Views:
    16,822
    ashley
    Jul 22, 2003
  5. Rick
    Replies:
    9
    Views:
    4,315
    dkmort
    Jul 20, 2009
Loading...

Share This Page