Bandwidth Utilization for PIX Rookie

Discussion in 'Cisco' started by langley101@aol.com, Feb 27, 2006.

  1. Guest

    Hi,

    I've inherited a PIX 506e at a new client. I've learned enough to setup
    the PIX handing out DHCP addresses and allowing access to an FTP server
    behind the firewall. I now think that I have a system inside the office
    taking up most of my T1 bandwidth. Is it possible for the 506e, with
    PDM 3.0(1), to tell me which IP address inside the office is using the
    most bandwidth? I've seen this function in Sonicwalls, but can't seem
    to find it in the PDM.

    Thanks.
     
    , Feb 27, 2006
    #1
    1. Advertising

  2. In article <>,
    <> wrote:
    >I've inherited a PIX 506e at a new client. I've learned enough to setup
    >the PIX handing out DHCP addresses and allowing access to an FTP server
    >behind the firewall. I now think that I have a system inside the office
    >taking up most of my T1 bandwidth. Is it possible for the 506e, with
    >PDM 3.0(1), to tell me which IP address inside the office is using the
    >most bandwidth?



    Please see
    http://groups.google.ca/group/comp.dcom.sys.cisco/msg/37ddb0b6234c1e48
     
    Walter Roberson, Feb 28, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. 1
    Replies:
    2
    Views:
    734
    Spencer Teran
    Dec 13, 2003
  2. Arunkumar
    Replies:
    1
    Views:
    1,698
    Steve Horsley
    Feb 21, 2004
  3. Ishaam
    Replies:
    2
    Views:
    10,095
  4. Replies:
    4
    Views:
    948
    Scooby
    Apr 19, 2007
  5. Giuen
    Replies:
    0
    Views:
    1,418
    Giuen
    Sep 12, 2008
Loading...

Share This Page