AS5400 thinks it is an as5350

Discussion in 'Cisco' started by Richard Bennett, Nov 13, 2005.

  1. Hi,
    I have an as5400, and was having problems getting my np60 and 2E1 boards
    being
    recognized. It seems that the as5400 thinks it is an as5350, and only
    recognizes boards inserted into the bottom 3 slots.
    Is this a setting somewhere, or did the supplier install the wrong IOS?

    Thanks for any ideas.
    Richard.

    sh ver:
    Cisco IOS Software, 5350 Software (C5350-JS-M), Version 12.4(1), RELEASE
    SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Fri 29-Apr-05 17:08 by hqluong

    ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
    BOOTLDR: 5400 Software (C5400-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT
    RELEASE SOFTWARE (fc1)

    net2 uptime is 2 hours, 36 minutes
    System returned to ROM by reload at 19:34:11 UTC Sun Nov 13 2005
    System restarted at 19:35:00 UTC Sun Nov 13 2005
    System image file is "flash:c5400-js-mz.124-1.bin"

    Cisco AS5400 (R7K) processor (revision T) with 262144K/131072K bytes of
    memory.
    Processor board ID JAE090658WZ
    R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
    Last reset from IOS reload
    Manufacture Cookie Info:
    EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
    Board Hardware Version 3.34, Item Number 800-5171-02,
    Board Revision C0, Serial Number JAE090658WZ,
    PLD/ISP Version 2.2, Manufacture Date 2-Feb-2005.
    Processor 0x14, MAC Address 0012.801c.6894
    Backplane HW Revision 1.0, Flash Type 5V
    2 FastEthernet interfaces
    76 Serial interfaces
    60 terminal lines
    4 Channelized E1/PRI ports
    512K bytes of NVRAM.
    32768K bytes of processor board System flash (Read/Write)
    16384K bytes of processor board Boot flash (Read/Write)

    Configuration register is 0x2102
     
    Richard Bennett, Nov 13, 2005
    #1
    1. Advertising

  2. My guess is simply that your file "c5400-js-mz.124-1.bin" is
    actually a 5350 image not a 5400 image, and if you load a real 5400 image,
    this box will think it's a 5400.

    Funnily enough, I just now checked a 5400 in our lab, and someone
    had loaded a 5350 image on it, and it looks and behaves just like yours.
    Guess I'd better fix it ...

    Cheers,

    Aaron

    ---


    ~ Hi,
    ~ I have an as5400, and was having problems getting my np60 and 2E1 boards
    ~ being
    ~ recognized. It seems that the as5400 thinks it is an as5350, and only
    ~ recognizes boards inserted into the bottom 3 slots.
    ~ Is this a setting somewhere, or did the supplier install the wrong IOS?
    ~
    ~ Thanks for any ideas.
    ~ Richard.
    ~
    ~ sh ver:
    ~ Cisco IOS Software, 5350 Software (C5350-JS-M), Version 12.4(1), RELEASE
    ~ SOFTWARE (fc3)
    ~ Technical Support: http://www.cisco.com/techsupport
    ~ Copyright (c) 1986-2005 by Cisco Systems, Inc.
    ~ Compiled Fri 29-Apr-05 17:08 by hqluong
    ~
    ~ ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
    ~ BOOTLDR: 5400 Software (C5400-BOOT-M), Version 12.2(2)XB2, EARLY DEPLOYMENT
    ~ RELEASE SOFTWARE (fc1)
    ~
    ~ net2 uptime is 2 hours, 36 minutes
    ~ System returned to ROM by reload at 19:34:11 UTC Sun Nov 13 2005
    ~ System restarted at 19:35:00 UTC Sun Nov 13 2005
    ~ System image file is "flash:c5400-js-mz.124-1.bin"
    ~
    ~ Cisco AS5400 (R7K) processor (revision T) with 262144K/131072K bytes of
    ~ memory.
    ~ Processor board ID JAE090658WZ
    ~ R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
    ~ Last reset from IOS reload
    ~ Manufacture Cookie Info:
    ~ EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
    ~ Board Hardware Version 3.34, Item Number 800-5171-02,
    ~ Board Revision C0, Serial Number JAE090658WZ,
    ~ PLD/ISP Version 2.2, Manufacture Date 2-Feb-2005.
    ~ Processor 0x14, MAC Address 0012.801c.6894
    ~ Backplane HW Revision 1.0, Flash Type 5V
    ~ 2 FastEthernet interfaces
    ~ 76 Serial interfaces
    ~ 60 terminal lines
    ~ 4 Channelized E1/PRI ports
    ~ 512K bytes of NVRAM.
    ~ 32768K bytes of processor board System flash (Read/Write)
    ~ 16384K bytes of processor board Boot flash (Read/Write)
    ~
    ~ Configuration register is 0x2102
     
    Aaron Leonard, Nov 14, 2005
    #2
    1. Advertising

  3. Aaron Leonard wrote:

    > My guess is simply that your file "c5400-js-mz.124-1.bin" is
    > actually a 5350 image not a 5400 image, and if you load a real 5400 image,
    > this box will think it's a 5400.
    >
    > Funnily enough, I just now checked a 5400 in our lab, and someone
    > had loaded a 5350 image on it, and it looks and behaves just like yours.
    > Guess I'd better fix it ...
    >
    > Cheers,
    >
    > Aaron
    >

    Hi,
    Yes, you're right. I installed another IOS, and now it shows all 7 ports as
    usual. Strangely the image that was on it had 5400 in its name.

    Richard.
     
    Richard Bennett, Nov 15, 2005
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. isptrader

    WTS: AS5400/AS5350/AS5300

    isptrader, Aug 12, 2005, in forum: Cisco
    Replies:
    0
    Views:
    392
    isptrader
    Aug 12, 2005
  2. Shane Breen
    Replies:
    2
    Views:
    660
  3. isptrader

    wts: as5400/as5350/as5300

    isptrader, Jun 13, 2005, in forum: VOIP
    Replies:
    0
    Views:
    499
    isptrader
    Jun 13, 2005
  4. isptrader

    Wts: As5400/as5350/as5300

    isptrader, Jun 30, 2005, in forum: VOIP
    Replies:
    0
    Views:
    499
    isptrader
    Jun 30, 2005
  5. isptrader

    Wts: As5400/as5350/as5300

    isptrader, Jul 25, 2005, in forum: VOIP
    Replies:
    0
    Views:
    433
    isptrader
    Jul 25, 2005
Loading...

Share This Page