An old system question...

Discussion in 'Cisco' started by f3red, Nov 16, 2003.

  1. f3red

    f3red Guest

    I have a Catalyst 5002 with an >almost< working Supervisor Module... I
    put the console log below to see if anyone could tell me how to break
    into the process and fond out what the problem is.

    THanks for any assistance you can offer,
    f3

    ----------------------
    ATE0
    ATS0=1

    Power Up Diagnostics

    Init NVRAM Log
    LED Test
    ROM CHKSUM
    DUAL PORT RAM r/w
    RAM r/w
    RAM address test
    Byte/Word Enable test
    EARL test
    EARL test Done

    BOOTROM Version 2.1, Dated Jun 4 1996 12:02:33
    BOOT date: 11/16/03 BOOT time: 11:26:49
    SIMM RAM address test
    SIMM Ram r/w 55aa
    SIMM Ram r/w aa55
    Uncompressing NMP image. This will take a minute...
    Minor hardware problem in Module # 1 <<<$$$ LOOKS LIKE THE START OF A
    PROBLEM
    Use 'show test 1' to see results of tests.

    IP address for Catalyst not configured
    BOOTP will commence after the ports are online
    Ports are coming online ...

    Cisco Systems Console

    Enter password:
    Software version = 4.5(8), PID =4
    Process Name = PortConfigProce

    Switching bus Timeout NMI

    switching bus Last Card Grant(Slot No) = 0

    NMI Exception occurred on May 08 1999 08:15:30
    PC = 102931BA, Status = 2000, Vector = 007C
    sp+00: 20001029 31BA007C 00000000 00000001
    sp+10: 00000000 113FB3D0 10290732 00000000
    sp+20: 00000000 00000000 00000000 00000000
    sp+30: 102904D4 10290000 0000E2EA 1029E2EA
    sp+40: 1029E2EA 10290000 00010000 0003E2EA
    sp+50: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+60: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+70: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+80: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+90: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+A0: 1029E2EA 1029E2EA 1029E2EA 1029E2EA
    sp+B0: 1029E2EA 1029E2EA 0000000C 00000003
    sp+C0: 00000001 102A8B52 00000005 00000000
    sp+D0: 00000000 00000000 00000000 29FBDDFC
    sp+E0: 1029E2EA 00000000 00418937 1029E2EA
    sp+F0: 1029E2EA 1029E2EA 00000002 00000005
    D0: 000001D1, D1: 00000036, D2: 0000000D, D3: 00000001
    D4: 0000000C, D5: 00000000, D6: 00000000, D7: 00000000
    A0: 68000000, A1: 1041C8A8, A2: 00000000, A3: 00000000
    A4: 00000000, A5: 00000000, A6: 113FB298, sp: 113FB2รพ

    $$$$$$$$$$$$ And then it starts over. Insufficient time to get its
    attention at the "Enter password:" prompt.
     
    f3red, Nov 16, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. lu

    old printer and old WP in Windows XP?

    lu, Jan 14, 2005, in forum: Computer Support
    Replies:
    6
    Views:
    824
  2. Deano

    new hard disk on old, old pc

    Deano, Oct 21, 2005, in forum: Computer Support
    Replies:
    5
    Views:
    705
  3. lefty

    old sony fd91 finally dying - old age?

    lefty, Oct 24, 2003, in forum: Digital Photography
    Replies:
    5
    Views:
    547
    james
    Oct 26, 2003
  4. Seymore

    Old Mountain... Old Machines...

    Seymore, Dec 3, 2003, in forum: Digital Photography
    Replies:
    1
    Views:
    404
    Mike Fields
    Dec 3, 2003
  5. Apkesh

    WTB: Old 8mm or old photo cameras

    Apkesh, Dec 23, 2003, in forum: Digital Photography
    Replies:
    1
    Views:
    383
    Mike Fields
    Dec 24, 2003
Loading...

Share This Page