Aironet 1200

Discussion in 'Cisco' started by Nicolaei, May 11, 2010.

  1. Nicolaei

    Nicolaei

    Joined:
    May 11, 2010
    Messages:
    3
    Hi,
    My access point 1200 does not want to respond to anything after a reset.
    Because I can only access it through HyperTerminal I tried the following:
    - I did reset it by turning OFF/ON and holding the "mode" button. I could see the reload process through HyperTerminal.
    - I do have access to the CLI-HyperTerminal.
    - I did connect it to my network to get a dynamic address through DHCP and nothing.
    - I did assign a static address from my network and nothing.
    - I know it has the IP of 10.0.0.1 by default and I assigned it to my laptop 10.0.0.2 and nothing.
    - I did assign a static address to be on the same network with my laptop - 192.168.1.0 (192.168.1.1 for AP and 192.168.1.2 for laptop) to "FA0" or to "BVI1" and nothing.
    - The last think I will have to do, if I'm not mistaken, is to reimage it but I don't know how to do it through the HyperTerminal.
    Please, can anyone help? I would really appreciate
    Nick
    Last edited: May 11, 2010
    Nicolaei, May 11, 2010
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. AdminKen

    Wireless LAN with PEAP and Passwords Aironet 1200

    AdminKen, Mar 30, 2005, in forum: Wireless Networking
    Replies:
    3
    Views:
    7,576
    Jeffrey Chong
    Sep 4, 2006
  2. Ton
    Replies:
    0
    Views:
    698
  3. isgroep@telin.nl
    Replies:
    1
    Views:
    471
    Walter Roberson
    Jan 7, 2004
  4. Faizan
    Replies:
    0
    Views:
    542
    Faizan
    Jan 23, 2004
  5. Andre Paetzold

    Aironet 1200 and Aironet 1300 compatible?

    Andre Paetzold, Dec 8, 2004, in forum: Cisco
    Replies:
    2
    Views:
    841
    Andre Paetzold
    Dec 9, 2004
Loading...

Share This Page