Advice on routing issue

Discussion in 'Cisco' started by Tide, Jul 18, 2008.

  1. Tide

    Tide

    Joined:
    Jul 18, 2008
    Messages:
    1
    I need help on setting up routing for a single subnet.

    -----------
    R1 Router | ----------Cloud
    --10.90.252.1
    |
    |
    -------
    4506 | -------po1-------- | 3750 | ---------| R2 router | --------Cloud
    vlan L3 |
    --------
    |
    | ->trunk port
    |
    ------
    2950 | -vlan18
    ------

    At the moment all traffic is routed via the etherchannel(po1) to the R2 Router via ospf. What i would like to do is route a single SVI on the 4506 to R1 instead of R2.

    Can i apply a route map on the subnet (10.90.18.0) SVI VLAN18 interface and set the next hop via r1 interface(10.90.252.1)

    should i apply the policy on the trunk port or on the SVI?
    Tide, Jul 18, 2008
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Martin Gallagher

    Re: Cisco routing issue

    Martin Gallagher, Jul 16, 2003, in forum: Cisco
    Replies:
    0
    Views:
    462
    Martin Gallagher
    Jul 16, 2003
  2. Barry Margolin

    Re: Cisco routing issue

    Barry Margolin, Jul 16, 2003, in forum: Cisco
    Replies:
    0
    Views:
    492
    Barry Margolin
    Jul 16, 2003
  3. zher
    Replies:
    2
    Views:
    8,875
  4. joeblow
    Replies:
    3
    Views:
    1,212
    Philip D'Ath
    Mar 14, 2005
  5. Sied@r
    Replies:
    3
    Views:
    8,402
    Sied@r
    Oct 20, 2005
Loading...

Share This Page