Adding OSPF Routes

Discussion in 'Cisco' started by Not Applicable, May 19, 2005.

  1. This is a silly question, but I need help with it nonetheless. On a
    2620 router running IOS version 12.3(11)T2 how do I add a route to an
    existing OSPF area? I have already run the commands below, but the
    route is not propagating to the other OSPF areas. All other routes in
    the OSPF area seem to be propagating, but this one does not. Do I need
    to activate the propagation in some way? Is there something else that
    needs to be done to have this entry propagate throughout the OSPF area?
    Any help would be appreciated.

    (config)# router ospf 4
    (config)# network 192.168.53.0 0.0.0.255 area 0
    Not Applicable, May 19, 2005
    #1
    1. Advertising

  2. Not Applicable

    Dan Daniels Guest

    "Not Applicable" <> wrote in message
    news:...
    > This is a silly question, but I need help with it nonetheless. On a
    > 2620 router running IOS version 12.3(11)T2 how do I add a route to an
    > existing OSPF area? I have already run the commands below, but the
    > route is not propagating to the other OSPF areas. All other routes in
    > the OSPF area seem to be propagating, but this one does not. Do I need
    > to activate the propagation in some way? Is there something else that
    > needs to be done to have this entry propagate throughout the OSPF area?
    > Any help would be appreciated.
    >
    > (config)# router ospf 4
    > (config)# network 192.168.53.0 0.0.0.255 area 0
    >


    The network command enables OSPF on an interface. Is the route you want to
    propagate the prefix of the interface that matches this network statement?

    It almost sounds like what you want to do is add a static route and then
    redistribute it into OSPF.

    http://www.cisco.com/warp/public/104/3.html#14.0
    Dan Daniels, May 20, 2005
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Lars Jorgensen
    Replies:
    3
    Views:
    2,884
    Ivan Ostres
    May 21, 2004
  2. maher
    Replies:
    3
    Views:
    17,484
  3. Replies:
    3
    Views:
    10,458
    Mathias Gaertner
    May 12, 2005
  4. jimbo
    Replies:
    2
    Views:
    832
    jimbo
    Jun 20, 2005
  5. Replies:
    0
    Views:
    409
Loading...

Share This Page