Adding additional routes to a VPN client (PIX515E and Cisco client)

Discussion in 'Cisco' started by jlamanna@gmail.com, Oct 29, 2006.

  1. Guest

    Lets say I have a local network at 10.20.2.0/24 and a dmz at
    192.168.216.0/24 on a PIX515E.
    VPN works fine using the cisco vpn client to anything in 10.20.2.0,
    however I can't reach anything on 192.168.216.0 presumably because its
    not being routed through the VPN tunnel.
    The VPN client only shows the route to 10.20.2.0 in the statistics
    page.

    Is there a command on the PIX when setting up the VPN tunnel that tells
    the VPN client to also add a route to 192.168.216.0?

    Thanks.
     
    , Oct 29, 2006
    #1
    1. Advertising

  2. Guest

    Nevermind - managed to figure it out since I was already most of the
    way there with my existing split-tunnel config.
    Just had to add the 192.168.216.0 network to the split-tunnel network
    list.

    wrote:
    > Lets say I have a local network at 10.20.2.0/24 and a dmz at
    > 192.168.216.0/24 on a PIX515E.
    > VPN works fine using the cisco vpn client to anything in 10.20.2.0,
    > however I can't reach anything on 192.168.216.0 presumably because its
    > not being routed through the VPN tunnel.
    > The VPN client only shows the route to 10.20.2.0 in the statistics
    > page.
    >
    > Is there a command on the PIX when setting up the VPN tunnel that tells
    > the VPN client to also add a route to 192.168.216.0?
    >
    > Thanks.
     
    , Oct 29, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. ants
    Replies:
    3
    Views:
    762
    Walter Roberson
    Jan 13, 2005
  2. gigi

    Cisco PIX515E and VPN

    gigi, Jun 25, 2005, in forum: Cisco
    Replies:
    2
    Views:
    972
  3. Arthur Askey

    Adding additional RAM????

    Arthur Askey, Dec 5, 2004, in forum: Computer Support
    Replies:
    2
    Views:
    570
    The Old Sourdough
    Dec 5, 2004
  4. er
    Replies:
    0
    Views:
    700
  5. Replies:
    2
    Views:
    995
    Walter Roberson
    Aug 22, 2007
Loading...

Share This Page