ACLS not showing up in PDM or working properly

Discussion in 'Cisco' started by facciabruta, Aug 30, 2006.

  1. facciabruta

    facciabruta Guest

    Hi,

    I have some basic ACL's that i'm adding to the PIX 501 as follows:

    object-group network WWWAccessOnly3
    network-object host 192.168.1.2
    network-object 192.168.1.4 255.255.255.252
    network-object 192.168.1.8 255.255.255.248
    network-object 192.168.1.16 255.255.255.240
    network-object 192.168.1.32 255.255.255.254

    access-list 109 deny tcp object-group WWWAccessOnly3 any neq www log
    access-list 109 permit ip any any

    These hosts are still getting through to all other ports other that the one
    WWW access port allowed.

    I also cannot see these ACL's within the GUI mananger when acessing the
    config through the HTTPS console.

    Any thoughts on what i'm doing wrong?

    Thanks
     
    facciabruta, Aug 30, 2006
    #1
    1. Advertising

  2. facciabruta

    facciabruta Guest

    forgot to assign the access-list to the interface:


    access-group 109 in interface inside





    "facciabruta" <> wrote in message
    news:mMlJg.5986$...
    > Hi,
    >
    > I have some basic ACL's that i'm adding to the PIX 501 as follows:
    >
    > object-group network WWWAccessOnly3
    > network-object host 192.168.1.2
    > network-object 192.168.1.4 255.255.255.252
    > network-object 192.168.1.8 255.255.255.248
    > network-object 192.168.1.16 255.255.255.240
    > network-object 192.168.1.32 255.255.255.254
    >
    > access-list 109 deny tcp object-group WWWAccessOnly3 any neq www log
    > access-list 109 permit ip any any
    >
    > These hosts are still getting through to all other ports other that the
    > one WWW access port allowed.
    >
    > I also cannot see these ACL's within the GUI mananger when acessing the
    > config through the HTTPS console.
    >
    > Any thoughts on what i'm doing wrong?
    >
    > Thanks
    >
     
    facciabruta, Aug 31, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. DigitalVinyl
    Replies:
    7
    Views:
    1,295
    DigitalVinyl
    Apr 8, 2005
  2. Replies:
    0
    Views:
    683
  3. Scot Gardner
    Replies:
    0
    Views:
    1,229
    Scot Gardner
    Sep 2, 2003
  4. =?Utf-8?B?QnJpYW5rNTg=?=

    bitrate info not showing properly in explorer

    =?Utf-8?B?QnJpYW5rNTg=?=, Apr 4, 2007, in forum: Windows 64bit
    Replies:
    0
    Views:
    538
    =?Utf-8?B?QnJpYW5rNTg=?=
    Apr 4, 2007
  5. Ali

    OT(ish): PBASE Images Not Showing Properly

    Ali, Dec 17, 2007, in forum: Digital Photography
    Replies:
    3
    Views:
    406
Loading...

Share This Page