about "match ip rtp starting-port-number port-range"

Discussion in 'Cisco' started by Weiguang Shi, Oct 24, 2003.

  1. Weiguang Shi

    Weiguang Shi Guest

    The starting-port-number is from 2000 to 65535 and the port-range is from 0 to
    16383.

    To configure QoS for VoIP traffic on a Cisco 2621 rotuer, what I should
    give for the two parameters? I saw some Cisco examples using

    match ip rtp 16384 16383

    But what about the other ports within the range of 2000 to 65535?

    I've searched the Cisco site and the newsgroup but haven't found an answer.

    Thanks very much,
    Wei
    Weiguang Shi, Oct 24, 2003
    #1
    1. Advertising

  2. Weiguang Shi

    alt Guest

    Weiguang Shi wrote:

    > The starting-port-number is from 2000 to 65535 and the port-range is from
    > 0 to 16383.
    >
    > To configure QoS for VoIP traffic on a Cisco 2621 rotuer, what I should
    > give for the two parameters? I saw some Cisco examples using
    >
    > match ip rtp 16384 16383
    >
    > But what about the other ports within the range of 2000 to 65535?
    >
    > I've searched the Cisco site and the newsgroup but haven't found an
    > answer.
    >
    > Thanks very much,
    > Wei


    Look into LLQ (Low Latency Queuing) for doing RTP prioritization. the "match
    ip rtp" is the old way.

    --
    Donovan Hill
    alt, Oct 25, 2003
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.

Share This Page