3745 ppp/radius authentication for analog modem call

Discussion in 'Cisco' started by Rolf Riess, Nov 27, 2003.

  1. Rolf Riess

    Rolf Riess Guest

    Hi all,

    I'm just trying to configure an c3745 (2 Channelized E1/PRI ports, 62 Serial
    network interfaces, 60 terminal lines)
    for isdn/analog modem dialin-service and radius-authentication. The
    ISDN-Calls are working fine, connecting analog
    modem seems to work, authentication fails.The radius-server-log says :
    .......................................................................
    Empty passwd attempted by user (uid=xyz)
    PPP - FAILED Empty password not allowed

    The 3745 is configured like this:
    ....
    aaa authentication ppp default radius
    .....
    isdn switch-type primary-net5
    !
    controller E1 1/0
    pri-group timeslots 1-31
    description 02331/984520 S2M
    ....
    interface Serial1/0:15
    no ip address
    encapsulation ppp
    dialer rotary-group 1
    dialer-group 1
    autodetect encapsulation ppp v120
    isdn switch-type primary-net5
    isdn incoming-voice modem
    peer ip address forced
    peer pool backup
    peer default ip address pool FUNetASYNC
    ppp authentication pap chap
    ....
    interface Group-Async1
    ip unnumbered Loopback1
    dialer in-band
    dialer rotary-group 1
    async mode interactive
    peer default ip address pool FUNetASYNC
    no keepalive
    ppp authentication chap pap
    group-range 66 94
    ....
    interface Dialer1
    ip unnumbered Loopback0
    encapsulation ppp
    dialer in-band
    dialer idle-timeout 600 inbound
    dialer-group 1
    peer default ip address pool FUNetISDN
    ppp authentication pap chap callin
    ppp multilink
    ....

    What am I doing wrong????

    TIA

    Rolf
     
    Rolf Riess, Nov 27, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Conlan
    Replies:
    0
    Views:
    910
    Conlan
    Jan 23, 2004
  2. Karnov
    Replies:
    1
    Views:
    8,460
    CCIE8122
    May 24, 2004
  3. Georg Dingler
    Replies:
    3
    Views:
    697
    Georg Dingler
    Sep 15, 2006
  4. Newbie72
    Replies:
    2
    Views:
    746
    rob_67
    Apr 2, 2008
  5. Giuen
    Replies:
    0
    Views:
    1,005
    Giuen
    Sep 12, 2008
Loading...

Share This Page