3745 IOS

Discussion in 'Cisco' started by terrydoc@o2.ie, May 24, 2010.

  1. Guest

    I have a 3745 running off xmodem download. I need to get IOS ontop
    flash: or slot0: so I can restart as normal. If I try to "TFTP: flash:
    (or slot0:)" from my TFTP server it always fails at the same point

    Router#copy tftp: flash:
    Address or name of remote host [10.1.1.2]?
    Source filename [c3745-ipbasek9-mz.124-25c.bin]?
    Destination filename [c3745-ipbasek9-mz.124-25c.bin]?
    Accessing tftp://10.1.1.2/c3745-ipbasek9-mz.124-25c.bin...
    Loading c3745-ipbasek9-mz.124-25c.bin from 10.1.1.2 (via
    FastEthernet0/0): !!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.O.O.O
    [timed out]

    %Error reading tftp://10.1.1.2/c3745-ipbasek9-mz.124-25c.bin (Timed
    out)
    Router#
    Router#dir all
    Directory of archive:/
    No files in directory
    Error getting file system status (Unknown error 0)
    Directory of system:/
    2 -r-- 0 <no date> default-running-
    config
    4 dr-x 0 <no date> memory
    1 -rw- 596 <no date> running-config
    3 dr-x 0 <no date> vfiles

    Error getting file system status (Bad file number)
    Directory of tmpsys:/

    No files in directory

    Error getting file system status (Bad file number)
    Directory of nvram:/

    150 -rw- 596 <no date> startup-config
    151 ---- 5 <no date> private-config
    1 -rw- 0 <no date> ifIndex-table
    2 ---- 13 <no date> persistent-data

    155640 bytes total (152939 bytes free)
    Directory of flash:/

    1 -rw- 611 Mar 1 2002 01:50:34 +00:00 running-config

    32296960 bytes total (32292864 bytes free)
    Directory of slot0:/

    No files in directory

    64057344 bytes total (64057344 bytes free)
    Router#
    Router#
    Router#
    Router#show ver
    Cisco IOS Software, 3700 Software (C3745-IPBASEK9-M), Version
    12.4(11)XW7, RELEA
    SE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Compiled Tue 08-Apr-08 22:37 by prod_rel_team

    ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

    Router uptime is 2 hours, 55 minutes
    System returned to ROM by power-on
    Running default software


    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are
    unable
    to comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be
    found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email
    to
    .

    Cisco 3745 (R7000) processor (revision 2.0) with 118784K/12288K bytes
    of memory.
    Processor board ID JHY0720K2PL
    R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3
    Cache
    2 FastEthernet interfaces
    DRAM configuration is 64 bits wide with parity disabled.
    151K bytes of NVRAM.
    31744K bytes of ATA System CompactFlash (Read/Write)
    62720K bytes of ATA Slot0 CompactFlash (Read/Write)

    Configuration register is 0x3962 (will be 0x2102 at next reload)

    Router#
     
    , May 24, 2010
    #1
    1. Advertising

  2. Dan Lanciani Guest

    In article <>, () writes:
    | I have a 3745 running off xmodem download. I need to get IOS ontop
    | flash: or slot0: so I can restart as normal. If I try to "TFTP: flash:
    | (or slot0:)" from my TFTP server it always fails at the same point

    I suspect you will be much happier if you use ftp or rcp...

    Dan Lanciani
    ddl@danlan.*com
     
    Dan Lanciani, May 24, 2010
    #2
    1. Advertising

  3. bod43 Guest

    On 24 May, 22:29, ddl@danlan.*com (Dan Lanciani) wrote:
    > In article <>, () writes:
    > | I have a 3745 running off xmodem download. I need to get IOS ontop
    > | flash: or slot0: so I can restart as normal. If I try to "TFTP: flash:
    > | (or slot0:)"  from my TFTP server it always fails at the same point
    >
    > I suspect you will be much happier if you use ftp or rcp...
    >
    >                                 Dan Lanciani
    >                                 ddl@danlan.*com


    Is the correct answer.
     
    bod43, May 25, 2010
    #3
  4. rmundy

    Joined:
    May 27, 2010
    Messages:
    10
    There is a file size restriction of 16MB for TFTP, which is probably why you're having the problems.

    As previously suggested, using FTP or RCP is a workaround for the problem. For more information, search on google for "Cisco TFTP 16MB"
     
    rmundy, May 27, 2010
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. shope
    Replies:
    1
    Views:
    5,196
    Hapee
    Jul 17, 2003
  2. Mike Gallagher
    Replies:
    0
    Views:
    462
    Mike Gallagher
    Jul 19, 2003
  3. Bartek

    2x2950 + 3745 in triangle

    Bartek, Oct 31, 2003, in forum: Cisco
    Replies:
    1
    Views:
    579
    Andre Beck
    Nov 1, 2003
  4. Rolf Riess
    Replies:
    0
    Views:
    693
    Rolf Riess
    Nov 27, 2003
  5. Mike Rahl
    Replies:
    1
    Views:
    1,250
    Trendkill
    May 30, 2007
Loading...

Share This Page