2950 switch to switch question

Discussion in 'Cisco' started by STandard, Jul 18, 2007.

  1. STandard

    STandard Guest

    hi all

    how can i use straight through cable to connect two 2950 switches?

    thanks


    steve
    STandard, Jul 18, 2007
    #1
    1. Advertising

  2. STandard

    NASSERBUZID

    Joined:
    Jul 14, 2007
    Messages:
    2
    No But You Can Use Crossover Cabel
    NASSERBUZID, Jul 18, 2007
    #2
    1. Advertising

  3. STandard

    NASSERBUZID

    Joined:
    Jul 14, 2007
    Messages:
    2
    No But You Can Use Crossover Cable
    NASSERBUZID, Jul 18, 2007
    #3
  4. STandard

    Rick Guest

    2950 requires a crossover to another 2950.
    2960 is auto-polarity sensing.


    "STandard" <> wrote in message
    news:...
    > hi all
    >
    > how can i use straight through cable to connect two 2950 switches?
    >
    > thanks
    >
    >
    > steve
    >
    >
    Rick, Jul 19, 2007
    #4
  5. STandard

    Trendkill Guest

    On Jul 17, 11:35 pm, STandard <> wrote:
    > hi all
    >
    > how can i use straight through cable to connect two 2950 switches?
    >
    > thanks
    >
    > steve


    By cutting the end, changing the pins to crossover, re-crimping, and
    connecting. :)
    Trendkill, Jul 19, 2007
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Terry Baranski
    Replies:
    2
    Views:
    8,608
    Terry Baranski
    Jul 9, 2003
  2. Nicholas
    Replies:
    5
    Views:
    5,632
    Erik Tamminga
    Oct 24, 2003
  3. Kelvin Ware

    Cisco 2950 Switch Errors

    Kelvin Ware, Nov 5, 2003, in forum: Cisco
    Replies:
    1
    Views:
    3,760
  4. mohitbakre
    Replies:
    3
    Views:
    1,135
    www.BradReese.Com
    Dec 10, 2006
  5. Tacobell
    Replies:
    5
    Views:
    4,225
Loading...

Share This Page