2621 Router Network on a stick config

Discussion in 'Cisco' started by RG, Jun 20, 2010.

  1. RG

    RG Guest

    I have set up a trunk link comprised of native vlan (ip address
    192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15
    255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am able to
    ping address 192.168.25.77. From the workstation, I am able to ping
    192.168.30.15 and 192.168.25.15 but not 192.168.25.77.

    Would anyone know why I am not able to ping 192.168.25.77?

    Thanks in advance
     
    RG, Jun 20, 2010
    #1
    1. Advertising

  2. * RG hackte in den Rechenknecht:
    > I have set up a trunk link comprised of native vlan (ip address
    > 192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15
    > 255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am able to
    > ping address 192.168.25.77. From the workstation, I am able to ping
    > 192.168.30.15 and 192.168.25.15 but not 192.168.25.77.
    >
    > Would anyone know why I am not able to ping 192.168.25.77?


    Wrong/no default gateway on 192.168.25.77?
    >
    > Thanks in advance
    >


    luke
    --
    Systemadministrator: Der wo macht, dass das Internet geht, den man aber
    nix wegen Word fragen darf, weil sonst ist er sauer und dann geht das
    Internet wieder nicht.
    --unbekannt, gefunden bei Peter J.Holzer
     
    Lukas Schratz, Jun 20, 2010
    #2
    1. Advertising

  3. On 20.6.2010. 14:47, RG wrote:
    > I have set up a trunk link comprised of native vlan (ip address
    > 192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15
    > 255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am
    > able to ping address 192.168.25.77. From the workstation, I am able
    > to ping 192.168.30.15 and 192.168.25.15 but not 192.168.25.77.
    >
    > Would anyone know why I am not able to ping 192.168.25.77?
    >
    > Thanks in advance


    Is default gateway on 192.168.25.77 pc the right one?
     
    Igor Mamuzić aka Pseto, Jun 20, 2010
    #3
  4. RG

    RG Guest

    Yes, you are absolutely right. There was no reverse route setup on the
    remote machine.

    Sorry, for the bother.

    "Lukas Schratz" <> wrote in message
    news:...
    >* RG hackte in den Rechenknecht:
    >> I have set up a trunk link comprised of native vlan (ip address
    >> 192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15
    >> 255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am able
    >> to
    >> ping address 192.168.25.77. From the workstation, I am able to ping
    >> 192.168.30.15 and 192.168.25.15 but not 192.168.25.77.
    >>
    >> Would anyone know why I am not able to ping 192.168.25.77?

    >
    > Wrong/no default gateway on 192.168.25.77?
    >>
    >> Thanks in advance
    >>

    >
    > luke
    > --
    > Systemadministrator: Der wo macht, dass das Internet geht, den man aber
    > nix wegen Word fragen darf, weil sonst ist er sauer und dann geht das
    > Internet wieder nicht.
    > --unbekannt, gefunden bei Peter J.Holzer
     
    RG, Jun 24, 2010
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Neils
    Replies:
    3
    Views:
    13,246
  2. weston
    Replies:
    8
    Views:
    939
    Aaron Leonard
    Nov 2, 2006
  3. zxcvar
    Replies:
    3
    Views:
    915
    Joe Hotchkiss
    Nov 28, 2004
  4. BigMike82

    Cisco 2621 router config issue

    BigMike82, Dec 23, 2007, in forum: Cisco
    Replies:
    5
    Views:
    996
    BigMike82
    Dec 23, 2007
  5. jsmith0012

    Cisco 2621 config problems.

    jsmith0012, Nov 12, 2009, in forum: Cisco
    Replies:
    0
    Views:
    872
    jsmith0012
    Nov 12, 2009
Loading...

Share This Page