2610XM and VIC-2BRI NT/TE

Discussion in 'Cisco' started by Jan, Sep 23, 2004.

  1. Jan

    Jan Guest

    Jan, Sep 23, 2004
    #1
    1. Advertising

  2. Jan

    BruceSA Guest

    I checked on the Cisco Configuration Tool at CCO and according to
    Cisco, the VIC-2BRI-NT/TE Module is supported on the CISCO2610XM
    Chassis.

    Consider using the following IOS Version:
    S26IPV-12305 Cisco 2600 Ser IOS IP VOICE.

    Did you know that compared to the current NM-2V, the new NM-HD-2V
    module offers greater port density and new DSPs (with additional
    memory for more features), all for the same list price as the current
    NM-2V module?

    Hope this helps.


    "Jan" <2.nl> wrote in message news:<4152ae18$0$767$>...
    > I have the following hardware:
    > 2610 XM
    > NM-2V
    > VIC-2BRI NT/TE
    >
    > IOS loaded:
    > flash:c2600-ipvoice-mz.123-5d.bin"
    >
    > I get the following error while booting:
    > %C542-1-UNKNOWN_VIC: VNM(1), vic daughter card has an unknown id of FF
    >
    > Is the VIC-2BRI compatible with the 2610XM? What IOS needs to be loaded?
    >
    > http://www.cisco.com/en/US/products/hw/modules/ps2641/products_tech_note09186a0080111b16.shtml
    BruceSA, Sep 23, 2004
    #2
    1. Advertising

  3. Jan

    Jan Guest

    I think I need Cisco 2600 SER IOS IP Plus (S26cp-12213T) but
    what does "SER" stand for? Is this the "normal" IOS Plus feature pack?

    I loaded the IOS Plus but getting same error with that :(

    "BruceSA" <> wrote in message
    news:...
    >I checked on the Cisco Configuration Tool at CCO and according to
    > Cisco, the VIC-2BRI-NT/TE Module is supported on the CISCO2610XM
    > Chassis.
    >
    > Consider using the following IOS Version:
    > S26IPV-12305 Cisco 2600 Ser IOS IP VOICE.
    Jan, Sep 24, 2004
    #3
  4. Jan

    Jan Guest

    Hmm, think SER stands for "serries" or something. So I loaded
    the correct IOS according to Cisco. Loaded IOS Plus and
    tried IOS Plus voice.

    But i keep getting:
    %C542-1-UNKNOWN_VIC: VNM(1), vic daughter card has an unknown id of FF

    The interface doesn't show up:

    SIP#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(13)T14, RELEASE SOFTWARE
    (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Thu 09-Sep-04 16:52 by ccai
    Image text-base: 0x80008098, data-base: 0x818410E8

    ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
    ROM: C2600 Software (C2600-IS-M), Version 12.2(13)T14, RELEASE SOFTWARE
    (fc3)

    SIP01 uptime is 24 minutes
    System returned to ROM by reload at 16:32:09 UTC Fri Sep 24 2004
    System restarted at 16:35:04 UTC Fri Sep 24 2004
    System image file is "flash:c2600-is-mz.122-13.T14.bin"

    cisco 2610XM (MPC860P) processor (revision 0x100) with 94208K/4096K bytes of
    memory.
    Processor board ID JAxxxxxx (xxxxxx)
    M860 processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    32K bytes of non-volatile configuration memory.
    49152K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102
    Jan, Sep 24, 2004
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Guan Yang

    Cisco 2600 VIC-2BRI - no sound

    Guan Yang, Feb 28, 2004, in forum: Cisco
    Replies:
    0
    Views:
    1,634
    Guan Yang
    Feb 28, 2004
  2. ee
    Replies:
    3
    Views:
    1,385
    peter_bruckner
    Apr 19, 2008
  3. R Siffredi

    VIC-2BRI-NT vs WIC-1B-U-V2

    R Siffredi, Jun 20, 2005, in forum: Cisco
    Replies:
    1
    Views:
    1,223
    Doug McIntyre
    Jun 20, 2005
  4. saintjmf
    Replies:
    0
    Views:
    511
    saintjmf
    Jun 21, 2008
  5. saintjmf

    Cisco 2610xm NM-2V and VIC-2FXO

    saintjmf, Jun 21, 2008, in forum: Cisco
    Replies:
    0
    Views:
    621
    saintjmf
    Jun 21, 2008
Loading...

Share This Page